Products in Other Adhesives & Sealants Applications: Hot Melt Adhesive

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

TRECORA POLYETHYLENE WAX – CWP400 is a High Density Polyethylene Wax intended for use in specifically Hot melt adhesives intended for the packaging industry where heat stability and heat resistance are required.

KINGMIDE 550-A is a high molecular weight polyamide resin especially designed for hot melt-adhesive use. KINGMIDE 550-A is easy to soluble in mixed organic solvent –such as toluene and alcohol type solvent. This resin has the characteristics of low softening point, and low molten viscosity so that it is suitable for applications where good adhesive strength and hardness are particularly needed.

Resin Chemicals Terpene Resin TP85 is a pale yellow transparent solid, and it is made from α-Pinene and aluminum trichloride. It has good compatibility with thermoplastic elastmomer SIS, SBS, SEBS, Natural Rubber and EVA..

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Fushun Huaxing Petroleum Chemical HX-1690A is C5 aliphatic hydrocarbon resin based on purified piperylene. HX1690A hydrocarbon resin is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers.It owns good balance of tack and cohesive properties ,excellent heat stability and wild compatibility.This grade is especially for EVA hot melt adhesive and SIS, SBS based pressure sensitive adhesive.

Puyang United Chemical C5 Petroleum Resin B-1315 is 100% C5 Aliphatic hydrocarbon resin. The key feature of B-1315 is high softening point and odorless. B-1315 can replace some of terpene resin to save cost in adhesive production. B-1315 is tackifying resin designed to provide high temperature performance and cohesive strength with a variety of adhesive polymers including metallocene polyolefins, APP, APAO, SISs block copolymers, natural rubber, synthetic polyisoprene, polyisobutylene and Butyl rubber. For APO& APAO base HMA, B-1315 recommend for carpet layer adhesive, book binding adhesive, mattress bonding adhesive, wood working adhesive, automobile interiors adhesive, mouse trap adhesive, glass sealant and electrical adhesive tape etc.

TRECORA POLYETHYLENE WAX – CWP500 is a High Density Polyethylene Wax intended for use in general hot melt adhesives to reduce viscosity and control open and set time.

Kolon Industries HIKOTACK® P-120P is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade especially shows very good compatibility with polar polymer such as epoxy resin, alkyd resin and ethylene vinyl acetate(EVA) by modification of phenolic monomer. The major usages are vehicles in the coating industry and tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA). .

Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.

Fischer Tropsch wax

Kolon Industries SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

TRECORA POLYETHYLENE WAX – TRECOR HMA-1 is a High Density Polyethylene Wax with a narrow molecular weight distribution. It is designed for use in Hot melt adhesives intended for the packaging industry to provide heat resistance, reduce the viscosity of the HMA formulation, and also control open and set time.

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Novotrade Invest AS HCR-135V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

Basis® F 39 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Norst® PB-400 is Particulate for thermoplastic applications. It is odorless and highly stable.

Copolymerized Petroleum Resin C5/C9-100 is Used in Rubber tires, HMAS, solvent-based pressure-sensitive, Adhesive.

Wax granules and powders

Bitoner Resin BT-1200H is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Norst® PB-800 is Particulate for thermoplastic applications. It is odorless and highly stable.

PENSEL GA-90 is a glycerol rosin ester. PENSEL GA-90 is based on Chinese Gum Rosin and produced by Guangxi Wuzhou Arakawa- China. PENSEL GA-90 resin can be used in various adhesive applications and with a variety of elastomers. PENSEL GA-90 gives excellent performance in adhesion and provides heat stability to the end use applications. PENSEL GA-90 is especially engineered to provide these properties with EVA.

C5 /C9 copolymer resin PR1-130 is a kind of thermoplastic resin produced by pre-treatment, polymerization, distillation and other processes from the C5 and C9 fractions by-produced by petroleum cracking. It is not a high polymer, but a molecular weight between 300- 3000 oligomers. It has the advantages of C5 petroleum resin and C9 petroleum resin. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance. It is chemically stable to acid and alkali, and has the characteristics of good viscosity adjustment and thermal stability. Since the structure does not contain polar groups, it has good water resistance, acid and alkali resistance, weather resistance and light aging resistance. It has good solubility in organic solvents, especially in petroleum solvents, similar to other resins. The compatibility is very good, and it also has brittleness, viscosity increasing, cohesiveness and plasticity. It is generally not used alone, but as an accelerator, regulator, modifier and other resins.

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3306 is a alcohol-soluble polyamide resin.

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3356 is a alcohol-soluble polyamide resin.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Bitoner Resin TR-110 include C5 modified C9 resin and C9 modified C5 resin.

LESTAC P100 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

C5 Petroleum Resin XD-1001L is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.