Products in Adhesives & Sealants: Acrylics

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

RELEASE PP 25 ECO DIL. 0,6 is a polyvinylcarbamate in solvent solution. It does not contain aromatic solvents.

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

Guangxi Zhongchang Resin RA90W resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance. Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Dai-ichi Kogyo Seiyaku Dainol 25 P is a Anionic surfactant.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Manchem® Zircoaluminates feature an inorganic metal component and an organic component. The bi-functional nature enables them to “bridge” or couple two or more species through irreversible chemical interactions. Common applications which are well suited for this adhesion technology are Coatings, Inks, Rubber and Adhesives.

Piq-White Ultra Premium Filler 30 is fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch-wrapped, 1500 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

SYLVARES TP 2019 terpene phenol is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

West Tech Chemical Ltd AT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

AKTIFIT AM is a SILFIT Z 91 coated with amino functional silane.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

COLOR PASTE WA ORANGE 7 is an APEO free water dispersion of organic pigments. Total pigment concentration: 42 %.

COLOR PASTE WA YELLOW 42 is an APEO free water based dispersion of organic pigments. Total pigment concentration: about 37%.

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

PENSEL GA-90 is a glycerol rosin ester. PENSEL GA-90 is based on Chinese Gum Rosin and produced by Guangxi Wuzhou Arakawa- China. PENSEL GA-90 resin can be used in various adhesive applications and with a variety of elastomers. PENSEL GA-90 gives excellent performance in adhesion and provides heat stability to the end use applications. PENSEL GA-90 is especially engineered to provide these properties with EVA.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

COLOR PASTE WA BROWN 7 is an APEO free water dispersion of organic pigments. Total pigment concentration: 43 %.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

EVERSTAB 350 is an unique light stabilizer that is effective in a variety of polymeric systems; particularly in polyesters, polyvinyl chlorides, styrenics, acrylics, polycarbonates, and polyvinyl butyl. EVERSTAB 350 is especially noted for its broad range UV absorption, low color, low volatility, and excellent solubility. Typical end-uses include molding, sheet, and glazing materials for window lighting, sign, marine and auto applications. Specialty applications for EVERSTAB 350 include coatings (particularly thermosets where low volatility is a concern), photo products, sealants, and elastomeric materials.

SYLVATAC RE 98 rosin ester is an economical pentaerythritol ester of tall oil rosin. This rosin ester is a broadly compatible tackifier. This is a versatile product for any application that can tolerate a slightly higher formulation color.

RELEASE K 100 S is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It is not recommended for hot-melt pressure sensitive adhesives. Thanks to its excellent solubility it is particularly suitable for printing applications (BOPP packaging tapes, PE protective films, etc). RELEASE K100 S is also recommened for the coextrusion of PE and PP films, where a constant release effect over the complete surface can be obtained. The product is silicone free.

Silquest™ A-1106 silane is an aqueous solution of an aminoalkyl siloxane. This alcohol-free siloxane improves signifi- cantly the adhesion and coupling between organic resins and inorganic surfaces. Momentive Performance Materials Silquest™ A-1106 silane is most often used in aqueous systems where the alcohol of hydrolysis causes instability of the formulation or where a high flash point additive is required. The product also reduces volatile organic content (VOC) and does not contain hazardous air polluting substances (HAPS). These benefits are particularly useful to manufacturers seeking to reduce emissions from their water-borne products and processes.