Products in Adhesives & Sealants: Pressure Sensitive Adhesive

GC-100 is an aromatic hydrocarbon resin with amber pastille appearance.

Silibase SR-6202N Liquid MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202N VMQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

HIGREE™ CL6100 hydrocarbon resin premium aliphatic hydrocarbon resin which is designed to takcify a variety of adhesive polymers including EVA, Polyolefin , APAO, NR, SIS , butyl rubber etc. It could be used for hotmelt adhesives, solvent basis PSA and other adhesives products.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Fasc-Tac™ 562P is an Acrylic Solution PSA used in HVAC foil tapes and construction tapes.

OPTICRYL 2050 by OPTICHEM is a Pure Acrylic Polymer Base. It has Adhesive for PSA tapes stabilized by FDA approved, APEO free surfactants and preservative.

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

OPTICRYL 2000 by OPTICHEM is a Pure Acrylic Polymer Base. It has Adhesive for BOPP tapes.

Polybut™ X2 is a low molecular weight conventional polybutene.

SYLVARES TP 7042 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Rit-Chem PL107 is disproportionated rosin ester. Used in hot melt and pressure sensitive adhesive applications.

RELEASE PP 25 DIL. 2,5 is a polyvinylcarbamate in solvent solution.

Staybelite Ester 10 is the glycerol ester of partially hydrogenated wood rosin.

Kolon Industries SUKOREZ® SU-110S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-110S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

GC-115 is an aromatic hydrocarbon resin with amber pastille appearance.

Fasc-Tac™ 820P is an Acrylic Solution PSA used in overlaminating, clear labels, health & beauty and general labels.

Kolon Industries HIKOREZ® T-1095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA) or Styrene-Isoprene-Styrene copolymer (SIS), and is mainly used as tackifier for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA). HIKOREZ® T-1095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA. .

Deqing Jiyuan Synthetic Resin MP-100 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

Fasc-Tac™ 840P is an Acrylic Solution PSA used in mounting tapes, urethane foam construction, automotive foam mounting tapes and outdoor applications.

Fushun Huaxing Petroleum Chemical HX-1690S is aromatic modified aliphatic hydrocarbon resin. HX1690S is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is primarily designed tackification of styrene-isoprene-styrene (SIS) block copolymers, but also has utility in natural rubber, poly-isobutylene, butyl rubber, EVA, APP and APAP. It is suggested as tackifying resin for high quality hot melt and hot melt pressure sensitive adhesives.

Solprene 4318 is a linear block copolymer of styrene and butadiene, having 32% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a clear color.Solprene 4318 is used as compounding ingredient for adhesives. The product is an excellent modifier for asphalt applications including self-adhesive roofing membrane and sealant. Also is used in thermoplastic injected shoe soles formulations.

Hitac Adhesives and Coatings RA-15W is an enhanced release version of RA-13W that has been commercially available for many years. Its release properties are virtually identical to carbamate PVODC and yields easy-to-moderate unwind in standard and premium packaging tapes, and filament tapes.

Hot polymerized SBR 1011AC elastomer is recommended for adhesive and pressure sensitive tape and label applications, and in mechanical rubber goods where non-staining and high tack is essential.

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Bitoner Resin C-2145 include C5 modified C9 resin and C9 modified C5 resin.

SYLVARES 1115 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Solid Acrylic Resin PChem® BM708 is an acrylate copolymer with high molecular weight. BM708 is an excellent resin for manufacturers’ pressure sensitive pressure adhesives. BM708 is soluble in esters, ketones, aromatic and chlorinated hydrocarbons and is compatible with wide variety of other resins including acrylics, vinyl, and nitrocellulose resins.

SureTac 1340 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

Copolymerized Petroleum Resin C5/C9-120 is Used in Paint, ink, pressure- sensitive adhesive.

Kolon Industries SUKOREZ® SU-210 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-210 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Kolon Industries SUKOREZ® SU-230S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230S is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers, and metallocene polyolefins and APAO.