Products in Adhesives & Sealants: 1K (1 Component) Adhesive

Evermore Chemical Industry SS-120B has a one component PU adhesives especially for warren release paper.

Coating P. Materials CX-6040 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Resicure® EMI-24 is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 1-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 3.0 phr. Resicure EMI-24 LV is a lower viscosity version of Resicure EMI-24.

AFEX™ CR20C is a base drying oil called as Corn having no double bond.

Evermore Chemical Industry SS-1100 is a good surface anti-blocking with good pigment dispersion and high gloss.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5003 is oxide black colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5039 is white colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5006 is chrome green colored.

Melos PC 31-030 is a one component, solvent free polyurethane binder with a high color fastness. PC 31-030 is designed for the production of elastic fall protection surfaces where light fast properties are required.

Capatue™ Epoxy Silanes SCA-E87F is a versatile epoxy organo-reactive silane with two hydrolysable ethoxy groups suitable for use as adhesion promoters in polysulfide, urethane, epoxy and acrylic caulks sealants and adhesives, especially suitable to be used as adhesion promoter and crosslinker for waterborne adhesives and sealants.

RISUN 30000T is trimethoxy silane terminated polyether polymer.

Capatue™ Masked Amino Silane SCA-MA10E is a masked aminosilane and can be to triggered the demasking with moisture. This masked aminosilane can stably exist in isocyanate, epoxy, acrylic and other amino-reactive resins but, when exposed to any form of water, hydrolysis occurs rapidly. The ketone byproduct escapes to leave an activated primary amine.

Capatue™ Isocyanato Silanes SCA-Y25E is unique isocyanate functional silane. The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds. The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates.

Vitro Minerals LA-800(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

The AMPARMOR® 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5009 is rose colored.

Coating P. Materials CX-6038K is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Evermore Chemical Industry SS-1180GHR is a high gloss with excellent flexibility and good hydrolysis resistance.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

Akuacure W3000 is a Per fluorine modified Water Dispersible Blocked isocyanateused and used as 1K Baking system Adhesive, Paint and coating.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5004 is oxide yellow colored.

Coating P. Materials CX-6041 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Synthel PE-3015 is solvent-free moisture curing prepolymer based on aromatic polyisocyanate.

Coating P. Materials CX-6038 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5023 is flame red colored.

Evermore Chemical Industry SS-181 has a good surface feeling with good pigment dispersion and high gloss.

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

KERILON® 201S is trimethoxy silane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Stobicoll® R 350 is a color paste designed for use in one-component polyurethane adhesives.

ETERAC 77307A is Solvent-based PSA.

ELAPOL 6510 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5007 is green colored.

Synthan PE-3008 is moisture curing prepolymer based on aromatic polyisocyanate.

Coating P. Materials CX-6085 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.