Products in Building & Construction: Styrene-Acrylic Copolymer

Acronal® 5018 is an aqueous dispersion of a polymer based on acrylic ester and styrene. Efka® FL 3745 is a flow and leveling agent, a silicone-free leveling agent with air release properties for liquid nonaqueous coatings. It is also suitable for powder coatings, modifies surface tension, provides smooth, trouble-free film surfaces, and improves gloss. The physical form is a clear, colorless liquid.

LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion that is solvent- and plasticiser-free. The emulsion is particularly suitable for the production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water, and has high saponification resistance. Because of these properties, Liocryl AS 320 is especially suitable for the production of outdoor paints and plastic-bound plasters, as well as for impregnating and priming brickwork and sanding plasters. It has applications in industrial coatings, architectural coatings, metal coatings, marine coatings, crafts and lobby, marine transportation, adhesives, and industrial maintenance.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Texicryl® 13-066 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives and is especially suitable for floor tile adhesive. It can be compounded into adhesives with a high degree of flexibility for use with wall and floor ceramic tiles.

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Texicryl® 13-065 is a styrene acrylic copolymer emulsion,designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and fix and grouts.

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Esschem MMA - Styrene Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) and styrene. These bead copolymers offer a wide array of properties and applications. With increased MMA content, the resulting materials exhibit remarkable strength and transparency. Conversely, a higher proportion of styrene enhances hydrophobicity, hardness, and impact resistance. The molecular weight plays a crucial role in determining the characteristics of the copolymers. Higher molecular weights, often associated with increased styrene content, yield stronger and more heat-resistant materials. Esschem's ability to manipulate the molecular weight distribution allows for customized properties such as durability, elasticity, and processing ease. Additionally, the particle size of the copolymers influences surface properties and rigidity.

Rovene 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. Features: Silane functionality for excellent wet and dry adhesion to inorganic substrates Can be formulated to meet ANSI 136.1 Fine particle size Excellent filler loading capability Excellent stability in highly filled systems

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 6130 is a very soft, self crosslinking, carboxylated styrene-butadiene emulsion specifically designed for formulation of masking and carton sealing tape adhesives. It exhibits excellent compatibility with a wide range of dispersed tackifiers and may be combined with natural latex to give the desired balance of tack, peel and shear. Rovene 6130 had found wide use in General Purpose paper label adhesives as well as some use in investment casting.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Silanated flexible binder for roof coatings ,moisture barrier coatings, tile adhesives, exterior insulation and finishing systems (EIFS), caulks & sealants

A P Resinas SAF700 is used to formulate waterproofing, paint, sealants, sealers and coatings. SAF700 is Clear, glossy film with extraordinary flexibility. Solid at 58%.

Aquamac® 570 is a styrene acrylic latex designed for formulation of concrete sealers. It provides excellent blush resistance at 100 g/l VOC. Manufactured in North America.

Designed for the formulations of exterior coating systems such as moisture barrier coatings that require high performance adhesion and water resistance properties. It can also be applied in roof coatings, sealants, plaster and putties due to its high tensile strength and superior flexibility properties

OPTICRYL 2900 by OPTICHEM is a Styrene Acrylic Polymer Base. It has General grade Styrene Acrylic Binder.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

OPTICRYL 2950 by OPTICHEM is a Styrene Acrylic Polymer Base. It has Universal alkaline resistance Styrene Acrylic Binder.

Aquamac® 740 is a styrene acrylic latex polymer with good block resistance and corrosion resistance when formulated for use in industrial metal primers. This resin has high gloss capability and utility for use in direct-to-metal finishes. It retains performance properties at higher pigment volume concentrations. Manufactured in North America.

OPTICRYL 3125 by OPTICHEM is a Styrene Acrylic Polymer Base. It has Excellent water resistance Styrene Acrylic Binder.

High performance cement modifier flexible polymer for sealants, pasty tile adhesives and mastics with very high adhesion and durability properties

Aquamac® 550 is a styrene acrylic latex that has demonstrated superior water, blush and efflorescence resistance as well as adhesion to masonry surfaces. Manufactured in North America. All components of this product are listed on the DSL.

A P Resinas SAF411 is used in to formulate paints, sealants and adhesives. SAF411 is Flexible, transparent plasticizer-free film.and High viscosity.

Aquamac® 737 is a styrene acrylic latex designed for industrial maintenance coatings at 50 g/l VOC or lower, while maintaining excellent overall properties. Manufactured in North America.

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

CH Polymers CHP 517 is a Styrene Acrylic Polymer containing 60% solid which has good elasticity and is MIT Free.

OPTICRYL 2900 ECO by OPTICHEM is a Styrene Acrylic Polymer Base. It has Green Styrene Acrylic Binder.

A P Resinas SAF554 is used to formulate waterproofing and paints. High flexibility transparent and glossy film.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Aquamac® 705 is a high gloss styrene acrylic latex featuring outstanding color and gloss retention as well as an excellent combination of hardness and flexibility. This resin exhibits outstanding early water resistance, salt spray and quv/prohesion corrosion resistance. It provides good airless spray properties that produce high performance metal protective finishes. Coatings formulated with this Aquamac® 705 also exhibit outstanding adhesion to smooth, polished or difficult-to-grip metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Emulsion for sealants, roof coatings, moisture barrier coatings, crack fillers, caulks high with tensile strength and superior flexibility

Aqueous styrene Acrylic emulsion, solvent- and plasticiser-free