Products in Building & Construction: Calcium Salts

HIFILL® 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 15 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

McNAMEE® Clay is a low cost air-floated kaolin reinforcer and inert filler. It is also used in crack fillers, caulking compounds, and elastomers.

BILT-PLATES® 156 Filler is a fine particle size (4 Hegman fineness) air-floated kaolin clay. It is used as a reinforcing filler in all types of coatings, adhesives, elastomers and latexes. It can be used as a TiO2 spacer in coatings that do not require a high brightness filler.

O Carb T is the controlled sized micronized ground calcium carbonate which is a cost reducing filler. It acts as a rheology modifier, helps to enhance the tensile strength & is used as a toughening agent for varied adhesive, caulks and sealants formulations.

Micron Carb 4010 is a cost effective high bright ground calcium carbonate used in various adhesives and sealants as a whitening agent, and for improving gap-filling properties in the formulation.

Micronlite AS is engineered with a unique surface treatment which helps to impart functional properties like sag & slump resistance, improved adhesion, easy dispersibility & supports to get controlled extrusion & avoid elongation while gunnability of sealant, it is recommended for sealant system like silicon, polysulphide, PU, PVC etc.

Micro Carb 3010 ST is a surface treated calcium carbonate filler for silicon, polyurethane and other neutral sealants where moisture sensitivity is a concern.

Vaporlite® 90 T is a premium grade of ultra fine CaCO3 suitable for less moisture sensitive applications its uniform particle size distribution helps to achieve optimum thixotropic properties, controlled viscosity, and anti-sagging in sealants. It can also be used to replace ppt calcium carbonate in formulations.

Shiraishi Kogyo Kaisha Hakuenka CC is our original Ultra-fine precipitated calcium carbonate coated with organic compounds. It was originally developed for reinforcing rubber materials in the early 20th century. Hakuenka CC has 50 nm uniformed ultra-fine particles as primary particle. These particles are surface treated with fatty acid in order to improve dispersion property at mixing stage with organic materials. Hakuenka CC is specially applied for construction application where Silicone & Polysulfide sealants are used. Hakuenka CC is commonly used as other application such as rubber, plastics and so forth.

MICROCARB NF1 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

The Micronized Products Mica 325# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Talc SR 3M has good chemical resistance for applications in paint and coating formulations. It improves corrosion resistance, water permeability, and film integrity. This talc can also be used in construction products such as joint compound, adhesives, sealants, putties, and caulks.

MICROCARB NF11 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Hubercarb® Q5-20 is a coarse particle size calcium carbonate produced in Quincy, IL for paints, coatings, adhesives, caulks and sealants applications.

Hubercarb® W3NT is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content enhanced by a propreitary fatty acid based surface treatment.

MICROCARB NF1T is a surface-coated very fine Calcium Carbonate powder with good dispersion properties, manufactured from a high purity white Calcium Carbonate.

ACCR T-104 is a fine white powder. It is processed from white marble.

Pulpro PP-10 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Geotex® 30-50 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

MICROCARB NF2T is a surface-coated very fine Calcium Carbonate powder with good dispersion properties, manufactured from a high purity white Calcium Carbonate.

MICROCARB NF3 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Shiraishi Kogyo Kaisha Viscoexcel-30 is a ultra-fine calcium carbonate which has 30 nm of particle size. These particles are surface coated with fatty acid to improve dispersion property at the mixing. Viscoexcel-30 is developed and designed as calcium type rheologicalmodifier. Viscoexcel-30provides high viscosity and high thixotropicproperty, the same as fumed silica or organic agent. Viscoexcel-30provides better rheologicalproperty both at low and high shear area, also provides better workability at high shear area.

Hubercarb® G325 is a high purity, medium fine ground calcium carbonate produced from a high brightness marble deposit in Georgia. Carefully controlled particle distribution allows G325 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 95% makes G325 ideal for use in oilfield drilling fluids.

Hubercarb® Q4 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Pulpro PP-8 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Hubercarb® G70 is a medium fine particle size calcium carbonate produced in Marble Hill, GA for paints, coatings, adhesives, caulks and sealants applications.

Hubercarb® G8 is a high purity, fine ground calcium carbonate produced from a high brightness marble deposit in Georgia for applications that require high brightness or pure tints. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, PVC compounds, rubber and plastics.