Products in Packaging & Assembly: Epoxy & Epoxy Derivatives

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Farboset® 1707-2 is a mineral and glass-filled, anhydride epoxy molding compound that is engineered for the encapsulation of various electrical and electronic components. It is specifically formulated to provide high thermal shock resistance, making it ideal for protecting components that may be subjected to rapid temperature changes or other harsh environmental conditions. This compound helps ensure the reliability and durability of encapsulated components.

Cosmic Epoxy EH61 is an iron-filled epoxy molding compound provided in a black granular form. It is designed for EMI/RFI shielding applications and can be utilized in compression or transfer molding processes to manufacture core rods or encapsulate surface mount and axial leaded inductors. This single molded compound streamlines the manufacturing process, eliminating the labor-intensive over/under molding steps.

Farboset® 1180 is a granular, glass-filled, general-purpose anhydride epoxy molding compound. It is formulated for encapsulation applications where excellent thermal shock resistance and physical strength are required. This compound helps protect electronic and electrical components by providing thermal shock resistance and maintaining their integrity under challenging conditions.

Farboset® 1708 is a specialized epoxy molding compound that combines mineral and short glass fillers, making it well-suited for the encapsulation of coils and other electrical and electronic components. It offers excellent moldability, which is important for achieving precise shapes during the encapsulation process. One of its standout features is its extreme resistance to thermal shock, meaning it can withstand rapid changes in temperature without cracking or degrading.

Cosmic Epoxy E4920FC is a mineral-filled epoxy molding compound available either in granular form or preformed in a variety of sizes and weights. It offers excellent moisture resistance, thermal cycling stability, and outstanding moldability. Parts molded from this material also resist fungus growth and are designed for the encapsulation of passive devices such as capacitors, inductors, diodes, and rectifiers.

Farboset® 9146 is a nonanhydride epoxy powder coating with a dielectric grade, making it suitable for applications where superior electrical and moisture resistance is required. This compound is designed for encapsulating various electronic components, including hybrids, mica capacitors, and other semiconductor-grade devices that demand high purity and optimal moisture performance. Its excellent adhesion characteristics make it an ideal choice for chip on board applications.

Farboset® 9020 is a nonanhydride epoxy powder coating known for its excellent moisture resistance. It is specifically designed for encapsulating components such as ceramic and film capacitors, coils, thermistors, and resistors. This coating helps protect these components from moisture and environmental factors, ensuring their performance and reliability. Farboset® 9020 can be applied using various methods, including fluidized bed, wheel coaters, and electrostatic spray techniques.

Cosmic Epoxy EH71 is an iron-filled epoxy molding compound available in a black granular form. It is well-suited for EMI/RFI shielding applications and can be used in either compression or transfer molding processes to create core rods or encapsulate surface mount and axial leaded inductors. The advantage of this material is its ability to streamline the manufacturing process by eliminating the labor-intensive over/under molding steps.

Cosmic Epoxy E4920AC is designed for the thermoset molding of electronic encapsulation. It is available in a solid form, provided as granules, preforms, or powder, and is offered in various colors. This product features a mild odor and is insoluble in water, making it suitable for a wide range of electronic applications. Additionally, it does not exhibit reactivity under normal conditions, ensuring safety and reliability in its intended use.

Farboset® 2460 is a novolac epoxy molding compound filled with minerals. It is designed for encapsulating a variety of electrical and electronic components, including tantalum and ceramic capacitors, resistors, resistor networks, and high-performance coils. This compound is formulated to provide fast cure rates, excellent moldability, and superior resistance to thermal shock and moisture. It has been specifically designed to offer improved resistance to moisture ingress, making it a reliable choice for applications where moisture resistance is crucial.

Cosmic Epoxy EH21 is an iron-filled epoxy molding compound provided in a black granular form. It is well-suited for applications requiring EMI (Electromagnetic Interference) and RFI (Radio-Frequency Interference) shielding. This material can be molded through compression or transfer molding processes to create core rods or to encapsulate surface mount and axial leaded inductors. It offers the advantage of simplifying the molding process by eliminating the need for labor-intensive over/under molding.

Cosmic Epoxy EH40 is an iron-filled epoxy molding compound available in a black granular form. It is suitable for EMI/RFI shielding applications and can be used for compression or transfer molding to create core rods or encapsulate surface mount and axial leaded inductors. This material simplifies the manufacturing process by allowing for single molded applications, eliminating the need for labor-intensive over/under molding.

Cosmic Epoxy EH31 is an iron-filled epoxy molding compound available in a granular form with a black color. This material is designed for EMI/RFI shielding applications. It can be used for compression or transfer molding to create core rods and encapsulate surface mount and axial leaded inductors. Using this single molded compound can streamline the manufacturing process and eliminate the need for labor-intensive over/under molding.

Farboset® 2720 is a mineral-filled epoxy molding compound known for its rapid curing, exceptional moldability, and remarkable resistance to thermal shock and moisture. This compound is tailored to offer enhanced protection against moisture ingress and boasts a high glass transition temperature, making it an ideal choice for ensuring reliability in performance. Its primary purpose is to encapsulate a wide variety of electronic devices, including tantalum and ceramic capacitors, resistors, and resistor networks, providing them with a robust shield against environmental factors and mechanical stress.

Farboset® 1160 is a granular, mineral-filled, anhydride epoxy molding compound designed for the encapsulation of various electrical and electronic components. It offers fast cure rates, long flow, and excellent thermal shock resistance. This compound is suitable for applications involving the encapsulation of coils, transformers, capacitors, diodes, relays, and other components that require good hot rigidity during the molding process.

Farboset® 1115 is a granular, mineral-filled, anhydride epoxy molding compound with fast cure rates and excellent hot strength. It is specially designed for encapsulating various electrical and electronic components, including coils, transformers, bushings, switches, and more. The material offers good hot rigidity during the molding process and is commonly used in injection and transfer molding applications.

Farboset® 2461 is a mineral-filled novolac epoxy molding compound that offers fast cure rates, excellent moldability, and superior thermal shock and moisture resistance. It has been formulated to achieve a high glass transition temperature, making it suitable for applications requiring optimal reliability performance, even in very thin sections. Farboset® 2461 is designed for encapsulating a wide range of electronic devices, including capacitors, resistors, resistor networks, and inductor coils, ensuring their protection and reliability in various operating conditions.

Cosmic Epoxy E4920 is a mineral-filled epoxy molding compound available either in granular form or preformed in various sizes and weights. It features excellent moisture resistance, thermal cycling stability, and remarkable moldability. Furthermore, parts molded from this material do not support fungus growth, and it is specifically designed for the encapsulation of passive devices, including capacitors, inductors, diodes, and rectifiers.

Farboset® 2510 is a mineral-filled, novolac epoxy molding compound known for its fast cure rates at low temperatures, excellent laser markability, and good moldability. This compound is specially formulated for encapsulating surface mount ceramic and tantalum capacitors, as well as other applications that demand quick cycle times. Its unique properties and rapid curing make it well-suited for applications where fast production and efficient marking are essential.

Farboset® 9081 is a nonanhydride epoxy powder coating specifically formulated for low-temperature applications, making it suitable for heat-sensitive electronic components. It is ideal for encapsulating film and ceramic capacitors that require processing at low temperatures. This compound can be applied using various techniques such as fluidized bed coating, wheel coaters, or electrostatic spray methods.

Farboset® 9544 is designed for coating a variety of electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors. Its resistance to cracking during thermal cycling is a valuable feature for maintaining the integrity of these components when subjected to temperature variations. Additionally, it can be applied using wheel and fluid bed equipment, providing flexibility in the coating process.

Cosmic Epoxy E4920CD is designed for the thermoset molding of electronic encapsulation. It is available in a solid form, offered as granules, preforms, or powders, and is available in various colors. This product has a mild odor and is insoluble in water, making it well-suited for a wide range of electronic applications. Additionally, it does not exhibit reactivity under normal conditions, ensuring safety and reliability in its intended use.

Cosmic Epoxy EH81 is an iron-filled epoxy molding compound available in a black granular form. It is specifically designed for EMI/RFI shielding applications and can be used in both compression and transfer molding processes to create core rods or encapsulate surface mount and axial leaded inductors. The advantage of this material is its ability to simplify the manufacturing process by eliminating the labor-intensive over/under molding steps.

Farboset® 9025 is a nonanhydride epoxy powder coating that is specifically formulated for use as an encapsulant for electronic components. One of its key characteristics is its excellent resistance to cracking during thermal cycling, which makes it ideal for applications where electronic components are subjected to temperature variations. This epoxy powder coating is designed for coating various electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors.