Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
This material flows easily under low pressure and provides good moldability.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
This material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods, or to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over/under molding.
Properties
- Color
- Electrical Properties
- Test Parameter
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Inductance | 0.65 - 0.70 | Ls (μH) | - |
Quality Factor | 12.3 - 13.4 | - | - |
Value | Units | Test Method / Conditions | |
Frequency | 1 | MHz | - |
Specimen | 1/16 | Rod, inches | - |
Wire Size | 0.008 | inches | - |
Number of Turns | 25 | - | - |
Value | Units | Test Method / Conditions | |
Specific Gravity | 3.7 | - | - |
Bulk Factor | 2.5 | - | - |
Molding Pressure | 50-800 | psi | - |
Molding Temperature | 130 - 180 | °C | - |
Molding Temperature | 266 - 350 | °F | - |
Spiral Range | 25 - 35 | inches | EMMI |
Recommended Post Cure (at 160 °C) | 2 - 4 | hours | - |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 6 months
- Storage and Shelf life Conditions
Storage Specification Data Storage Life 5 °C (40 °F),months 6