Products

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crystic® Polyester Resin 2.446PA is a pre-accelerated, thixotropic, spray viscosity, orthophthalic polyester resin with low styrene emission. This laminating resin's rapid wet-out, low exotherm, and fast hardening characteristics make it ideal for rapid mold turnaround. It has a 26-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications. A low-viscosity version of this product is also available.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Low Styrene Gelcoat 76PA FR is a low styrene content, pre-accelerated, fire retardant gelcoat developed to have very low surface spread of flame. It has been formulated for brush application and can be used for building applications, vehicle bodies and general industrial work.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Fire Retardant Resin U1007TPA is a filled, fire-retardant, pre-accelerated, thixotropic unsaturated polyester resin designed for RTM and RTM light. It cures with standard MEKP peroxide and has a 17-minute gel time. This product will achieve M2 to the French fire standard.

Crestafix® 621CC White 20 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It exhibits no drainage on vertical surfaces, is highly thixotropic, and provides excellent adhesion and good elongation at break.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crystic® Polyester Resin 2.406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin with low styrene emission. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a 16-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crestafix® 621CC 30 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It has excellent adhesion and good elongation at break, with no print through and an excellent surface aspect.

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crestafix® 621CC 65 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It offers excellent adhesion and good elongation at break and requires a visual check for an effective catalyst mix.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crestafix® 621CC 10 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It is highly thixotropic and offers excellent adhesion and good elongation at break.

Crystic® Laminating Resin 406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a gel time of 18 minutes and Lloyd's approval. This product is suitable for use in marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin 2.420PA is a long gel time, low styrene emission, pre-accelerated orthophthalic polyester resin. This laminating resin has a 45-minute gel time and low exotherm, making it suitable for the molding of large structures and thick laminates. Crystic® Polyester Resin 2.402PALV is the low-viscosity version of this product. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications.