Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-part, dispersion containing amino-functional silicone dispersed in a mixture of aliphatic or isopropanol solvents
- Good adhesion to metal substrates
- Cures at room temperature upon exposure to atmospheric moisture
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Ideal for use as a silicone coating on metals and other substrates and also can be used as needle coatings
- Provides excellent lubricity for cutting edges, needle cannula, and other applications requiring friction reduction
- Instructions for Use
Application
Apply directly to surfaces by dipping, spraying, brushing, or wiping. Prior to use, dilute material to desired concentration for the specific application. Experimentation may be required to determine the concentration that yields the appropriate coating thickness.
Solubility
MED-4159 is soluble in many organic solvents including aliphatic and aromatic hydrocarbons, chlorinated solvents, and ethers. This fluid is not water-soluble and hydrolyzes rapidly when placed in contact with water. Any solvents used to dilute this material must be moisture-free.
Mixing
Thoroughly stir material to ensure homogeneity. Exercise care to prevent solvent loss during deairing. Accomplish additional dilution for thin film applications by adding appropriate solvent. Mixer design/size/type, blade/propeller type, shear/RPM levels, and heat generated during mixing, are important parameters and should be addressed in order to have an adequately mixed dispersion. Warning: Consult the MSDS for MED-4159 prior to use, as its solvent carrier is hazardous.
Coating and Use
Make sure to apply under a fume hood or in a well ventilated environment. Care should be taken before placing coated mandrels or parts in oven due to the presence of solvent. Reference cure schedule for devolitilization times.
Properties
- Physical Form
- Appearance
- Clear
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 200.0 | cST | - |
Non Volat ile Content | 53.0 | % | - |
Mix Rat io | 1 PART | - | - |
Solvent | Stoddard Solvent & IPA | - | - |
Special Feat ure | Specialty Coating, Dispersions | - | - |
Value | Units | Test Method / Conditions | |
Cure System | Amine | - | - |
Cure at RTV | 7.0 | days | - |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Most dispersions are stored prior to application. It is important to note that NuSil recommends keeping the dispersion in its original container when possible, tightly sealed and stored below 40º C. Care should be taken to prevent solvent evaporation and contamination during long or short term storage.