Products

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds ALFATER® XL A80 2EC0000 is a black, electrically conductive, thermoplastic vulcanisate (PP+EPDM) with reduced surface resistivity, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air and hydrolysis resistance. It is used in the automotive, machinery, electrical and electronic, and building and construction sectors for applications such as injection molded parts, extruded parts, coextrusion, and functional components with electrical conductivity, seals, sealing lips, and profiles.

MOCOM Compounds ALCOM® PC 740/1 SV1115-08MCF is a polycarbonate injection molding grade with a metallic effect and low tendency to flow lines. It is suitable for use in the automotive, building and construction markets. Pre-drying is recommended in a dry air (dessiccant) dryer at 100-120°C for 2-3 h depending on moisture content, with a maximum moisture content of 0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used. Additionally, it should be stored in the dark.

MOCOM Compounds ALFATER® XL ECO D50I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used for injection molded and blow molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, cable ducts, bellows, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general and is used in the automotive, building and construction, electrical and electronic, machinery, and furniture markets.

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT1068-07 is a 9% injection molding and 9% extrusion grade Acrylonitrile/Butadiene/Styrene/Copolymer (ABS). It is designed to meet wall thickness and color intensity requirements for different applications and operational areas. The base polymer is Acrylonitrile/Butadiene/Styrene/Copolymer, and the filler/additive system is a laser sensitive additive, with a lubricant. The color is white, similar to RAL 9003 and RAL 9016, and the light fastness colorant is blue woolscale 8. It has special features such as being laser etchable (dark etching), impact modified, containing a slip agent, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure applications, and its application areas are injection molded parts, extruded parts, and compounding.

MOCOM Compounds ALTECH® PA6 B 1000/170 is a polyamide 6 base polymer that solidifies quickly and is easy to demold. It is heat and processing stabilized, making it suitable for injection molding with melt temperatures between 250-270°C and mold temperatures between 40-80°C. This polymer is suitable for use in the automotive, machinery, building and construction, and sport and leisure markets. It can be used for injection molded parts, clothing/fasteners, and for housings and functional components.

MOCOM Compounds ALTECH® ECO PA6 1000/586 is a polyamide 6 base polymer with fast solidifying, high impact modified, and high toughness properties. It contains recycled material, and is suitable for applications in the automotive, building and construction, and various market segments. Typical applications include operating elements, housings, cable ties, and various transport systems and energy management components.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALTECH® PP-B A 4430/120 MR30 UV is a Polypropylene Heterophasic Copolymer with 20% chalk, 10% talcum, and UV, heat, and processing stabilizers, as well as easy release (demolding) properties. For injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C should be used. This thermoplastic is suitable for building and construction, electrical and electronic, and sport and leisure market segments, and can be used for domestic appliances, gardening tools, and exterior parts. Typical applications include housings, fixing elements, and functional components.

MOCOM Compounds ALTECH® PP-H A 2030/652 GF30 UV CP is a polypropylene homopolymer with 30% glass fibers chemically coupled, UV stabilized, processing stabilized, easy release (demolding), heat stabilized, designed for automotive, building and construction, and machinery applications such as domestic appliances, injection molded parts, exterior parts, and interior decoration/finishing. Pre-drying conditions should be in a dry air (desiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H A 4925/500 MR25 is a polypropylene homopolymer with 25% talcum filler/additive system that is heat-stabilized, easy to release (demold), and processing-stabilized. This material is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C and is used in the market segments of furniture, building and construction, and automotive for injection molded parts and interior decoration/finishing. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALTECH® PP-H A 4940/106 MR40 is a Polypropylene Homopolymer with a 40% talcum filler/additive system that is heat stabilized, processed stabilized, and has an easy release (demolding). Injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is widely used in the automotive, building and construction market segments, primarily for injection molded parts, interior decoration/finishing and exterior parts. Typical applications include different automotive powertrain parts, housings, and functional components. To ensure optimal shelf life, the material should be stored dry, protected from light, and at a temperature of no more than 30°C.

MOCOM Compounds ALTECH® PP-H A 4920/180 MR20 is a polypropylene homopolymer with 20% talcum, which offers hot water resistance, good chemical resistance, heat stability, easy release (demolding), and good flow. It is designed for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This material is suitable for applications in the building and construction and automotive industry, such as interior decoration/finishing, injection molded parts and housings, fixing elements, and functional components.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALCOLOR® Function PA AO A WT1114-15 is a 6% dosage injection molding colorant for use in Polyamide with a base polymer of Polyamide, a light fastness colorant of blue woolscale 8, a filler/additive system of light stabilizer, a color of white, special features of being UV stabilized, free from cadmium, lead and diarylide pigments, dust-free, with a high additive content and high dispersibility, for use in various building and construction applications, such as door handles.

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT3056-10 is a white colorant, similar to RAL 9003, with a dosage of 9.0% for extrusion and injection molding, depending on wall thickness and required color intensity and application and operational area. It contains a Laser sensitive additive and a blue woolscale 8 Light Fastness colorant, and is based on Acrylonitrile/Butadiene/Styrene/Copolymer. It is laser etchable (dark etching), impact modified, high additive content, free from cadmium, lead, and diarylide pigments, and has high dispersibility and is dust-free. It is suitable for Automotive, Machinery, electrical and electronic, Furniture, building and construction, and sport and leisure applications, for injection molded parts, extruded parts, and compounding.

MOCOM Compounds ALTECH® PP-H A 2045/500 is a Polypropylene Homopolymer with 45% glass fibers, heat stabilized, extrusion grade, low emission, and processing stabilized. It is suitable for Pre-Drying Conditions in an air circulating dryer 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer 80-120°C for 2-3 h. Processing Injection molding is done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is used for building and construction, sport and leisure applications, such as functional components, housings, and sports equipment. It should not be exposed to strong UV radiation and should not be stored in direct sunlight.

MOCOM Compounds ALTECH® ABS A 1000/568.03 is a Base Polymer Acrylonitrile/Butadiene/Styrene/Copolymer with a slip agent and is suitable for various building and construction and interior decoration/finishing applications. It requires pre-drying conditions before processing. Processing Injection molding is done at a melt temperature of 200-240°C, and a mold temperature of 50-80°C. It is recommended to store the material in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 WT1260-20 is a polystyrene base polymer with impact-easy release (demolding) properties, designed for injection molding grade applications. It is suitable for use in the Automotive, electrical and electronic, and building and construction market segments, to make injection molded parts such as bezels and housings. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be done with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-H FC 1000/576 is a polypropylene homopolymer used in processing injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C. It is nucleated and used in the food processing industry, building and construction, and electrical and electronic industries for the production of household goods, electrical components, domestic appliances, filter systems, injection molded parts, functional components, and housings. For optimal performance, it should be kept in the dark at temperatures not exceeding 30°C.

MOCOM Compounds ALFATER® XL A60I 2UV0000 UV is a thermoplastic vulcanisate (PP+EPDM) with natural color and UV stabilization, suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. Additionally, it has excellent adhesion to various materials.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.

MOCOM Compounds ALTECH® PP-H B 2030/156 GF30 is a polypropylene homopolymer with 30% glass fibers, which are chemically coupled and have easy release (demolding) features. It is used for processing injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is suitable for medical/personal care, building, and construction applications such as housings, pump impellers, and functional components.

MOCOM Compounds ALFATER® XL A40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color and black options. It has good recovery, weathering, chemical, ozone, hot air, and hydrolysis resistant properties. It is best suited for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer.

MOCOM Compounds ALFATER® XL A65I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. Its market segment includes automotive, building and construction, electrical and electronic, machinery, and furniture, and its applications include injection molded parts, seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components.

MOCOM Compounds ALFATER® XL A90I 3EF0010 is a black thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has special features of easy flow, high surface quality, weathering dry, hot (Kalahari, PV3929), weathering moist, hot (Florida, PV3930), good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture market segments for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It has an adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer generally.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALFATER® XL D40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) that comes in natural color, bright inherent color, and black. It has low emission, good colorability, easy flow, and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications for injection molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, thin walled parts, profiles, cable ducts, casters, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It is ideal for applications requiring high temperature performance and resistance to weathering.

MOCOM Compounds ALTECH® ECO PC 2030/200 GF30 is a polycarbonate base polymer containing 30% glass fibers and recycled material, suitable for applications such as plugs/connectors, housings, and other household goods and energy management. To ensure optimal performance, pre-drying conditions require a dry air (dessiccant) dryer at 100-120°C for 2-3 h, or an air circulating dryer at 100-120°C for 4-12 h depending on moisture content, with a maximum moisture content of <0.02%.

MOCOM Compounds ALFATER® XL A35I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and is best suited for injection molding. It is used for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for use in a variety of industries including automotive, building and construction, electrical and electronic, machinery, furniture, and other industries.

MOCOM Compounds ALFATER® XL A30I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color and bright inherent color. It is widely used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets for injection molded parts such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, and 2K components. Furthermore, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general.

MOCOM Compounds ALTECH® PP-B B 4020/506 MR20 is a polypropylene copolymer with 20% mineral filler/additive system featuring easy release (demolding), processing stabilized, heat stabilized, and easy flow properties. It is suitable for the packaging, building and construction market segments, and typical applications include housings, functional components, and fixing elements. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.