Products

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALFATER® XL A50I 3EF0010 is a black Thermoplastic Vulcanisate (PP+EPDM) which is easy to flow and has high surface quality. It offers good weathering, chemical, ozone, hot air and hydrolysis resistance. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profiles, cable ducts, and 2K components. It adheres to Polypropylene Homopolymer, Polypropylene Copolymer, Polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer in general.

MOCOM Compounds ALFATER® XL A80E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color and high viscosity. It features good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture sectors and can be used for extruded parts, blow molded parts, coextrusion, profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-B A 2020/550 GF20 CP is a polypropylene heterophasic copolymer pre-dried with a dessiccant dryer at 80-120°C for 2-3 h or an air circulating dryer at 80-120°C for 2-4 h and with a filler/additive system of 20% glass fibers. Processing with injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material has special features such as being chemically coupled, UL-listed, having slip agent, being processing stabilized, having easy release (demolding), being heat stabilized and being suitable for the building and construction, machinery and automotive market segments. Typical applications include housings, fixing elements, and functional components. For optimal performance, this material should be stored in darkness and at not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1416-04LD is a polycarbonate base polymer with a special filler and additive system that is UV stabilized and features translucent, light scattering, and easy flow properties. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds ALCOM® PC 740/30 UV FR WT1030-08LD is a polycarbonate base polymer with special filler, flame retardant, halogen and phosphorus free, UV stabilized, with light scattering, extrusion grade and suitable for injection molding. It is used for light transparent components in the automotive, lighting, electrical and electronic market segments, such as lamp covers, display elements and operating elements.

MOCOM Compounds ALCOM® LD PC 1000 UV 15112 GY1027-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features translucent, light scattering, high light diffusion, and good flow properties. It is suitable for use in automotive and lighting market segments and is typically used for display elements, operating elements, and light transparent components. It has approvals of GS93016 and is suitable for injection molding using a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALFATER® XL ECO D50I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used for injection molded and blow molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, cable ducts, bellows, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general and is used in the automotive, building and construction, electrical and electronic, machinery, and furniture markets.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16042 WT1048-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering, high light diffusion, and good flow. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALCOM® PC 730/5 UV WT1231-10LDX is a polycarbonate extrusion grade that is UV stabilized and contains a special filler. It is translucent, light scattering, and has high light diffusion, making it ideal for use as lamp covers and other light transparent components in automotive and lighting applications. The melt temperature for extrusion should be in the range of 240-280°C.

MOCOM Compounds ALCOM® PC 740/4 CC1121-05LD is a polycarbonate base polymer containing a special filler/additive system for light scattering, high light transmission, and easy flow. It is approved for GMW15702 and GS93016, and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C. To ensure optimal performance, the product should be stored in a dry place, away from light.

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

MOCOM Compounds ALFATER® XL A80I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color or black color, designed for injection molding applications. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17132 WT1125-17 is a polycarbonate base polymer with a special filler/additive system, designed for the Automotive and Lighting market segments. It is typically used for lamp covers, display elements, and operating elements, and has GS93016 approvals. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1104-20 is a polycarbonate-based polymer with a special filler and UV stabilized additive system, suitable for automotive and lighting applications. It is used for creating light transparent components and black panel technology, with typical applications including display elements and operating elements.

MOCOM Compounds ALCOM® PC 740/4 CC1084-07LD is a polycarbonate base polymer with a special filler/additive system designed for light scattering and high light diffusion. It is commonly used in applications such as lamp covers, display elements, and operating elements in the automotive and lighting markets. The injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C. It has also been approved by GS93016.

MOCOM Compounds ALCOM® MS PP 1000 IM GY1153-20 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has high light transmission, light scattering, and easy flow. It is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements and has been approved by GS93016. For injection molding processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1217-10LD3 is a polycarbonate base polymer filled with a special filler that offers light scattering and high light diffusion. It is mainly used in the automotive and lighting industry for applications such as lamp covers, display components, and operating elements. To pre-dry the polymer, it should be kept at 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, ensuring a moisture content of less than 0.02%. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® AWL 10/3 WT1308-05LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer that is opaque, highly reflective, heat stabilized, and has easy flow. It is suitable for markets such as Automotive and various application areas like lighting and light blocking components. Typical applications include light guides and reflectors.

MOCOM Compounds ALCOM® PP 620/1 MR40 WT1034-05LB is a polypropylene homopolymer pre-dried using a dry air (dessiccant) dryer or an air circulating dryer at 80-100°C for 2-4 hours, with a maximum moisture content of <0.02%. It features 40% special filler, providing a highly reflective, opaque material. It is commonly used for light guides, reflectors, and light blocking components in the automotive and lighting markets. It is processed through injection molding with a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALFATER® XL A85I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air resistance. It is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, 2K components, and casters. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It is ideal for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries.

MOCOM Compounds ALCOM® PC 740/4 UV GY1415-04LD is a polycarbonate injection molding grade with a special filler/additive system that is translucent, light scattering, processing stabilized, UV stabilized, and approved by GS93016. It is designed for pre-drying conditions of 120°C in a dry air (desiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h, with a maximum moisture content of <0.02%. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements. The processing injection molding melt temperature should be 270-310°C, and the mold temperature should be 80-110°C.

MOCOM Compounds ALTECH® ECO PP-H 2030/550 GF30 is a Polypropylene Homopolymer containing 30% glass fibers that are chemically coupled and heat stabilized, with recycled material. It is suitable for Automotive, building and construction, machinery, and various applications such as transport systems, fixtures/fittings, and clips, and impact protection/shock absorber, among others. Pre-drying conditions should be carried out in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® PC 740/4 UV WT1102-04LD is a special filler base polymer polycarbonate that is UV stabilized, has light scattering, high light transmission, and easy flow properties. It is GS93016 approved and is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16156 GY1118-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features the properties of being translucent, light scattering, high light diffusion, and having good flow characteristics. It is approved by GS93016 and is suitable for Automotive and Lighting market segments, with typical applications such as lamp covers, display elements, and operating elements. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature should be 80-110°C. When storing this material, it should be kept dry and protected from light.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds ALTECH® ECO PP-H 2030/550 CP GF30 is a polypropylene homopolymer containing 30% glass fibers that is chemically coupled and heat stabilized, as well as containing recycled material. Suitable for markets such as automotive, building and construction, machinery, and various others, it has applications including transport systems, fixtures/fittings, and various others. Typical applications include clips, impact protection/shock absorber, and various others.

MOCOM Compounds ALCOM® PC 740/4 UV CC1174-13LD is a polycarbonate base polymer with a special filler/additive system that is UV-stabilized and has high light transmission, light scattering, and high light diffusion. It is suitable for applications such as lamp covers, display elements, and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALTECH® PP-B A 4815/510 MR15 IM is a polypropylene heterophasic copolymer that is processed by injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 15% chalk and has special features such as impact modification, injection molding grade, heat stabilization, easy release (demolding), and processing stabilization. It is used in electrical and electronic, automotive, and other applications such as electrical components, interior decoration/finishing, clothing/fasteners, functional components, fixing elements, and housings.