Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
MOCOM Compounds Company Logo

ALTECH® PC A 1000/500

MOCOM Compounds ALTECH® PC A 1000/500 is a polycarbonate-based product with easy flow, heat stabilization, and easy release (demolding) features. It is suitable for various injection-molded parts. Before processing, it should be pre-dried under 120°C in a dry air (desiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of <0.02%. During processing, it should be injection-molded at a melt temperature of 270-310°C and a mold temperature of 80-110°C. After processing, it should be protected from light and stored at a temperature not exceeding 30°C.

Brand: ALTECH (305 products)

Polymer Name: Polycarbonate (PC)

Processing Methods: Injection Molding

Functions: Resin

CAS Number: 7757-83-7

Additives Included: Heat Stabilizer

Chemical Family: Polycarbonate (PC)

Flexural Modulus: 2650.0 - 2650.0 MPa

Synonyms: Na2SO3,Sodium Sulfite

Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free

Technical Data Sheet
Enhanced TDS

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Additives Included

Heat Stabilizer

Chemical Family

Polycarbonate (PC)

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polycarbonates

Features & Benefits

Labeling Claims

Azo Colorants-free,

Azo Dyes-free,

Conflict minerals-free,

PAH-free,

PFOA-free,

PFOS-free,

Persistent Organic Pollutants (POP)-free

Materials Features

Good Flow,

Good Mold Release,

Heat Stabilized

Applications & Uses

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Flexural Modulus2650.0MPaISO 178
Flexural Strength105.0MPaISO 178
Tensile Modulus2500.0MPaISO 527
Tensile Stress at Yield65.0MPaISO 527
Tensile Elongation at Yield6.0%ISO 527
Impact Strength (Charpy, at 23°C)no breakkJ/m²ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)12.0kJ/m²ISO 179/1eA
Physical Properties
ValueUnitsTest Method / Conditions
Density1200.0kg/m³ISO 1183
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat B50140.0°CISO 306
HDT / A (1.8 MPa)125.0°CISO 75-1/-2
Typical Properties
ValueUnitsTest Method / Conditions
Moisture Contentmax. 0.02%-
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Melt Temperature270 - 310°C-
Mould Temperature80 - 110°C-
Rheological Properties
ValueUnitsTest Method / Conditions
Melt Index (MVR)25.0cm³/10minISO 1133
MVR Temperature300.0°C-
MVR Load1.2kg-
Shrinkage (24h)min. 0.6%ISO 294-4

Regulatory & Compliance

Certifications & Compliance

Directive 2011/65/EC amended through EU/2015/863 (RoHS),

EC No.1907/2006,

IATF 16949,

ISO 13485,

ISO 14001,

ISO 17025,

ISO 45001,

ISO 50001,

ISO 9001,

REACH (Europe),

REACH (UK),

RoHS Compliant,

SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions
  • In an air circulatIng dryer 100-120 °C for 4-12 h
  • Dependant on moisture content
  • 120 °C in a dry air (dessiccant) dryer for 2-3 h

Storage & Handling

Storage Conditions

Store in dry, protected from light not above 30°C.