Products

KOSMOS® 16 is a strong gel catalyst for polyether-based systems, utilizing a combination of tin and bismuth. It facilitates a robust gelling reaction. It is sensitive to moisture and requires the correct handling during storage and production to maintain high performance.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VISIOMER® Terra C13-MA (methacrylic ester 13.0) is a specialty monomer that offers enhanced water repellency and improved resistance against polar solvents. It is commonly employed to increase the hydrophobicity of resins, making them more resistant to water and other polar substances. This particular monomer is derived from raw materials obtained from natural oils, highlighting its environmentally friendly nature. VISIOMER® Terra C13-MA finds applications in various industries including adhesives and sealants, coatings, construction, oil and gas, paper, personal care, and healthcare.

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

ROHACELL® WF is a core material with a coarse cell size that offers exceptional heat resistance and creep compression strength. It is characterized by its high temperature and compressive resistance, making it suitable for various applications, including aircraft, space, automotive, industrial, and radomes.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

VISIOMER® MADAME is a monofunctional methacrylate with a tertiary amino group in the side chain. It is an ideal ingredient for improving the adhesion of formulations. This monomer is widely used in the preparation of cationic polymers, particularly quaternary ammonium polymers and flocculants. Industries such as coatings, oil and gas, paper, and personal care can benefit from the unique properties of VISIOMER® MADAME.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VISIOMER® Terra IBOMA is a bulky side-chain alkyl methacrylate monomer known for its exceptionally high glass transition temperature (Tg). It offers the advantage of lowering viscosity in polymers, enabling the formulation of high solids content. This monomer finds applications in various industries, including adhesives and sealants, coatings, and composites.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

ROHACELL® S is a closed-cell rigid foam created using polymethacrylimide (PMI) chemistry, and it is entirely free of CFCs. This foam is self-extinguishing, meaning it has fire-resistant properties. It is well-suited for various applications, including use in rail vehicles, watercraft, and the aerospace industry, where fire safety is a critical consideration.

VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. This monomer can be used as a functional co-monomer in acrylic emulsions for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VISIOMER® BNMA (benzyl methacrylate) is an aromatic monofunctional methacrylate known for its low viscosity. It serves as a reactive diluent, offering excellent solvency in adhesive, ink, and coating formulations. This versatile compound finds applications in various industries, including adhesives and sealants, coatings, composites, and electronics.

VISIOMER® EHMA (2-Ethylhexyl methacrylate) is a hydrophobic monomer with a low glass transition temperature (Tg), minimal shrinkage, and low viscosity. This monomer offers flexibility and exhibits excellent dilution and solvency power. It is widely used in the production of various polymers for diverse applications across industries such as adhesives and sealants, coatings, oil and gas, personal care, and healthcare. Its unique properties make it a valuable component in the formulation of materials that require flexibility, low shrinkage, and efficient solvency capabilities.

VISIOMER® DMAPMA (3-Dimethylamino propyl methacrylamide) is an amino functional methacrylamide monomer. Its methacrylamide structure provides increased hydrolytic stability compared to methacrylic esters. This monomer is commonly used to enhance pigment wetting and improve substrate adhesion to polymers. Industries such as coatings, oil and gas, paper, personal care, and healthcare can benefit from the unique properties of VISIOMER® DMAPMA.

INFINAM® PEEK 9359 F is a filament created by extruding natural-colored VESTAKEEP® polyether ether ketone (PEEK) resin. This semi-crystalline polymer boasts exceptional thermal and chemical resistance. This material finds application in various industries, including aerospace and automotive. When used with fused deposition modeling (FDM) technology, it offers advantages such as reduced material consumption, improved mechanical properties of printed parts, and greater design flexibility for our customers.

VISIOMER® HEMA-P 70 M is a monofunctional methacrylate with a phosphate group in the side chain. It is supplied in 30% methyl methacrylate, which gives it a low viscosity and makes it easy to handle. This monomer provides superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. Visiomer® HEMA-P 70M can be used as a functional co-monomer in acrylic emulsions for coating resins, as well as an adhesion promoter in adhesive formulations.

Evonik Polymer VS 100 comprises vinyl-terminated polydimethyl siloxanes available in various viscosity levels and molecular weights, featuring an impressively low content of volatile constituents. These polymers serve as essential base components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents, combined with the crosslinking mechanism, ensures low curing shrinkage and prevents the formation of volatile or corrosive substances during the curing process.

ROHACELL® Triple F in-mold foamed (IMF) cores enable cost-effective production of intricate three-dimensional cores for high-volume serial production of FRP composites. They help reduce waste, manual labor, and cycle times, potentially lowering the cost per part. Additionally, ROHACELL® Triple F reduces resin uptake, leading to decreased resin costs and lighter parts.

VISIOMER® MEEU 25 M is an ureido methacrylate solution containing 25% ureido methacrylate in MMA (methyl methacrylate). It is specifically designed for enhancing wet adhesion and wet scrub resistance in various polymer applications. This versatile product finds utility in industries such as adhesives and sealants, coatings, as well as textile and leather. VISIOMER® MEEU 25 M provides improved performance in terms of adhesion and durability, making it a valuable additive for achieving high-quality results in polymer formulations.

INFINAM® PA 6001 P is a food contact-acceptable powder designed for 3D printing. It boasts remarkable characteristics such as chemical resistance, consistently high quality, durability, excellent mechanical strength, oil resistance, excellent surface properties, good processability, high strength, and high-temperature resistance. Additionally, it is UV-resistant. This versatile material serves various industries, including aerospace, automotive, and medical applications.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

ROHACELL® HERO represents cutting-edge material technology, revolutionizing the production of lightweight and durable composite aircraft structures. These advanced sandwich cores, made from ROHACELL® HERO, offer unmatched weight-saving potential among all structural foams. They not only reduce the weight of aircraft but also enhance their durability over their operational lifespan. Additionally, they contribute to cost savings in the manufacturing process, making them a superior choice for modern aircraft construction.

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.