company tower banner
Ebalta Kunststoff Gmbh Company Logo

Ebalta Kunststoff Gmbh AH 100TGS

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. The fast hardener TGS is used for thin laminates and small-volume back fillings.

Polymer Name: Epoxy Resins & Compounds

End Uses: Construction Applications, General Purpose, Textile Applications

Flexural Strength: 95.0 - 105.0 MPa

Enhanced TDS

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Plastics & Elastomers Functions
Basis
Universal gerneral purpose resin
Technologies

Features & Benefits

Materials Features
Properties

unfilled
fast curing

Applications & Uses

Cure Method
Applications

Thin-walled laminates
Low volume backfillings
Bonding resin for fillers

Processing Instructions

The temperature of material and processing should be between 18 and 25° C.

The mixing of resin and hardener should be made intensively and if possible without any bubbles at room temperature.

We recommend a post curing with a temperature rise of about 10°C/hour. Difficult geometries should be supported during the curing cycle. Afterwards the part should be cooled down at about 20°C/hour.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Shore hardness82 ± 3Shore DDIN ISO 7619-1
Compressive Strength75 ± 5MPaEN ISO 604
Viscosity (25°C)750 ± 100mPa.s-
Flexural elongation at break6.7 ± 0.5%EN ISO 178
Density (20°C)1,12 ± 0,02g/cm3-
Flexural modulus2800 ± 200MPaEN ISO 178
Pot Life (200g/20°C)25 - 35minutes-
Flexural strength100 ± 5MPaEN ISO 178
Curing time at RT8-10Hrs-
Heat resistance (HDT)76 ± 3°CDIN EN ISO 75 B
Impact resistance (Charpy)34 ± 8kJ/m2EN ISO 179

Packaging & Availability

Packages

5,000 kg / 10,000 kg / 25,000 kg / 50,000 kg / 220,000 kg 1,000 kg / 2,000 Kg / 5,000 kg / 50,000 kg

Storage & Handling

Storing

At appropriate storage 18-25°C.

Occuring crystallization due to disadvantageous storage conditions can be made return by warming up the material at approx. 60° C for some hours.

Opened containers should be closed immediately after use and be protected against moisture. This material should be used up as soon as possible.

Shelf life is indicated on the labels