Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- TG-65NS thermal compound resists changes in consistency for temperatures up to 180°C; function as heat transfer media, durable dielectric insulation, barrier against environmental contaminants and as a stress-relieving shock and vibration absorber over a wide temperature and humidity range.
- TG-65NS thermal paste is resistant to ozone and ultraviolet degradation and has good chemical and solvent stability, good interference between the heat producing device and the heat transfer media, and low surface tension that enables them to wet most surfaces.
- TG-65NS will not harden, dry, or melt after 1200 hours @ 205°C.
- Non-Silicone Thermal Grease
- Excellent Thermal Resistance
- High Thermal Conductivity
- Meets MIL-C-47113 & MIS-19846 Specifications
- Features & Benefits
- Meets MIL-C-47113 & MIS-19846 Specifications
- Compatible with metal and plastic components
- Excellent thermal conductivity and thermal resistance
- Wide operating temperature range with no creep or migration
- Will not dry, harden or melt in normal use
- Non-Flammable
- Non-Toxic
- Non-Corrosive
- Non-Sag or flowing
- Non-Hazardous polymerization
- Reworkable
- Easily removed
- Easy to apply via dispensing or screen printing
- Low surface tension that enables it to wet most surfaces, which can lower the thermal contact resistance between the substrate and material.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Potential Uses
Industrial Applications:
- Thermal Coupler for any heat sink device
- CPU to heat sink
- Temperature sensors
- Applied to the base and mounting studs of transistor, diodes and silicone controlled rectifiers
- Power transistors, Diodes, Semiconductors
- Potting
- Telecommunications
- High performance thermal product for the powerelectronics industry
- Application Methods
Automated or manual dispensing.
- Usage Instructions
For industrial use only.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Bleed (24 Hours) | 0.6 | % | - |
| Dielectric Constant (100Hz) | 4.4 | - | ASTM D150 |
| Dielectric Strength | 380 | volts/mil | ASTM D150 |
| Dissipation Factor (100Hz) | 0.0021 | - | ASTM D150 |
| Evaporation (24 hrs, 25°C) | 0 | % | - |
| Evaporation (200°C, 24H By Weight) | 0.5 | % | - |
| Press Flow (42.5 PSI, 25°C) | 11 - 13 | sec | - |
| Specific Gravity (25°C) | 2.45 | - | - |
| Volume Resistivity | 1.38 x 10¹⁴ | ohm-cm | ASTM D257 |
| Viscosity | Paste | - | - |
| Penetration (Worked) | 285.1 | mm | - |
| Thermal Conductivity | 0.88 | W/m-K | - |
| Operating Temperature Range | -60 - 205 | °C | - |
| Thermal Resistance | 0.04 | °C -In²/W | - |
Safety & Health
- Environmental Impact Data
ODP None HCFC None VOC None HFC None
Storage & Handling
- Storage Handling & Shelf Life
TG-65NS has a shelf life of 5 years at room temperature (76°F) in an unopened container, settlings may occur during long term storage, it is recommended to re-mix the filler by hand or mechanical mixing. Keep container tightly closed store in cool area away from ignition sources and oxidizers, no special precautions need to be taken if product is handled according to directions. Shelf life is indicated on the product label, any special storage and handling instructions will be printed on the product container label.
- Clean Up and Disposal
TG-65NS can be removed by using solvents such as mineral spirit, heptane, or isopropyl alcohol. Dispose of in accordance with local, state and federal regulations for hazardous waste.