Products

Glazex 5 HB kaolin is an ultra-fine particle-size grade that contains high brightness.

Flowax 8 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Talc HR 25 is sub-microns particle size platy talc with a high surface area & high aspect ratio to provide excellent barrier properties. During injection molding, these talcs act as ideal reinforcing fillers which provide greater stiffness & impact strength better dimensional stability. It is compatible with all thermoplastics & thermosets.

Hyperfilm 90 is an anti-block additive with different chemistry for better clarity & low haze with high gloss. Hyperfilm 90 is a specialty calcined kaolin grade that offers excellent anti-block performance and makes it more compatible with the PE matrix.

FMSIL® R 812 is HDMS treated hydrophobic fumed silica, which acts as a rheology control additive in paint formulations.

FMSIL® R 202 is a PDMS treated hydrophobic fumed silica, which provides excellent thickening properties in paint formulations.

Fastflow P is a polymeric base wetting & dispersing additive. It has high viscosity & high melting wax and is thus recommended for inorganic pigments up to 10 - 15% pigment loading.

Zinkomer series of activators are uniquely developed products, thereby exhibiting better processability, lowering mixing time, improving dispersion, maintaining excellent rheo properties, heat aging properties, and mechanical properties. These products replace Zinc Oxide 100% as an activator for rubber. Last but not the least these are techno commercially and immensely beneficial as compared to conventional white seal and active products. Zinkomer is an innovative excellence which is a replacement to ZnO white seal. It is an efficient activator.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

K- STOFF PYN is specially designed to reduce the water carry-over issue in a highly filled & high-speed raffia tape line.

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

Amorphlos is a diatomaceous earth base anti-block additive.

K - STOFF T is a unique MPA for filled compounds, which offers excellent bonding, to filler & polymer with the enhanced flow & improved mechanical properties.

FMSIL® 807 is an amorphous silica appearing as white free flowing powder.

Klear floss is a modified proprietary product that offers excellent clarity, low haze with high gloss and anti-block performance.

Supermag 150 is an efficient activator that is highly active, and has high surface area MgO. It is produced under a special processing condition, thereby resulting in controlled particle size distribution. Supermag 150 is a high active magnesium oxide mainly used as an acid scavenger, scorch retarder, or curing agent during the cross-linking of several rubber compounds containing halogens or nitrile groups. Examples include chloroprene rubber and synthetics rubber (FKM, CIIR, BIIR, CPE).

Talc HFM 25 is sub-microns particle size platy talc with a high surface area & high aspect ratio to provide excellent barrier properties. During injection molding, these talcs act as ideal reinforcing fillers which provide greater stiffness & impact strength better dimensional stability. It is compatible with all thermoplastics & thermosets.

Fastflow SG is a specialty hybrid modified wax and process additive for natural and synthetic rubber providing homogeneity in the mixing of rubber compounds and better dispersion of pigment and filler in rubber mix. They improve scorch safety, cure rate and mechanical properties (tensile strength, elongation, hardness) of rubber compounds. They also provide excellent weather resistance, UV resistance & ozone resistance.

Polaid TPT is an effective nucleating dispersing agent, specially developed for talc filled & transparent application PE/ PP based antifibrillation masterbatches/ compounds.

Flowax 12 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.