Products in Paints & Coatings: Iron

NANOMYTE® TC-4001-UVP is a single component formulation designed to protect metals and other surfaces from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. A variety of other surfaces may be coated as well, such as plastics and composites. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils, and is available in glossy or matte finishes.

ASTRO-KOTE PM is a synthetic, water-based rust inhibitor for in-plant rust protection on ferrous alloys and was designed to prevent rust on pressed metal parts between processing operations. It can also be used in the final rinse after the soak, spray, or barrel tumbling operations. This product does not leave any oily films and contains no solvents. ASTRO-KOTE PM may be used as a supplementary rust inhibitor for use in water-soluble metalworking fluids such as aqueous cleaners. It contains wetting agents which facilitate penetration into pressed metal parts either before or after sintering. It is ashless and will not leave residues when parts are heat treated or sintered.

ASTRO-KOTE A is a solvent-based rust-preventative coating designed to protect ferrous materials from rust. It has a clear amber liquid appearance. This product is fast drying and is intended to be used as received. It is not to be mixed with water and may be used to protect castings, cast iron, steel, and packaged parts from rust.

ASTRO-KOTE LT is a solvent-based rust-preventative coating designed to provide exceptional protection against rust and staining on ferrous materials. It is also non-staining to a variety of non-ferrous metals, including aluminum, zinc, copper, and brass. It may be used to protect castings, cast iron, steel, and packaged parts from rust. This product is intended to be used as received, with no mixing or dilution needed, and should not be mixed with water.

ASTRO-KOTE HF is a low-viscosity, oil-based, rust-preventative coating designed to protect ferrous materials from rust. It has a clear brown liquid appearance. This water-displacing product is intended to be used as received and it should not be mixed with water. It may be used to protect castings, cast iron, steel, and packaged parts from rust.

ASTRO-KOTE R is a solvent-based rust preventative that combines the long-term protection of asphalt with petroleum solvents to provide rapid, thorough coating, fast drying, and an extremely long protective life. This product may be used to protect castings, cast iron, steel, and packaged parts from rust both indoors and outdoors.

ASTRO-KOTE A-OF is a solvent-based rust-preventative coating designed to provide exceptional protection against rust and staining on ferrous materials. It is water-displacing and also non-staining to a variety of non-ferrous metals, including aluminum, zinc, copper, and brass. It may be used to protect castings, cast iron, steel, and packaged parts from rust and it is intended to be used as received, with no mixing or dilution needed.

NANOMYTE® TC-4001 is a single component formulation designed to protect metals from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping, and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils.

Zyp Coatings BN Hardcoat is the original truly tough/abrasion-resistant boron nitride coating.

L&L #300 Mastic UL Classified is a high-build, waterborne, elastomeric barrier coating. Its unique blend of premium acrylic resins and pigments combine to form a durable, mildew-resistant film with exceptional adhesion and flexibility. L&L 300 is a breathing mastic which allows damaging substrate moisture to escape, while protecting against ultra-violet, water and air-flow intrusion.

EFDEDUR-UHS Primer UR1937H has Ultra-High-Solid Primer with Solvent, Good adhesion on different undergrounds, High sagging limit, Good corrosion protection, For industrial goods and all types of construction machines.

METALIZE® ALKYD PRIMER 8-HES-1116 is a black heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

AB RUST® HSA is a ready to use aqueous solution combining several corrosion inhibitors.

NCP Coatings N-8521 - 3.5 VOC Universal Primer is a 3.5 VOC, Lead and Chromate Free Light Gray Phenolic Modified Primer designed for interior and exterior application to steel. This primer is very well suited for general industrial applications including heavy equipment, trailers, and trucks. Will accept many topcoats including some 2K Urethanes.

GacoFlex® N-17 neoprene coating is a single component, air curing, liquid coating designed to yield an elastomeric film of high physical characteristics.

Hill and Griffith EZ KOTE™G PLASTIC PM Core and Mold Coating is a water based refractory coating formulated for ferrous and non-ferrous castings. The formulation permits the product to be used on small intricate cores up to heavy cores and molds. The Premixed version (PM) typically has a Baume of 39.5.

Consolidated Coatings Fast Dry Alkyd Enamel 55-0800 is this medium duty alkyd fast dry enamel enables quick turnaround, in the paint shop. use on machinery, piping, heavy equipment and, industrial metal.,.

METALIZE® ALKYD PRIMER 8-HES-1126 is a gray heavy duty, high solids alkyd primer providing excellent corrosion protection for steel and other fabricated metal products in normal industrial environments. It is used as airless or conventional spray.

Armoloy® XADC – Diamond Chromium Coating offers today’s industrial design and engineering community the opportunity to expand their options to enhance the performance of their equipment and tooling. The addition of nano-diamond spheres to the Armoloy® TDC coating technology is unique, but still allows for cost-effectiveness and rapid delivery to ensure on-budget and on-time delivery. The XADC-Armoloy® coating enhances the durability of components used in a wide range of applications from plastic injection mold tooling to coating aerospace applications that require long life expectancy, extreme wear protection, low frictional characteristics and corrosion protection.

Sumter Coatings Heavy Duty Inhibitive Primers 100N9949 is a high solids, rust inhibitive Alkyd primers designed to protect steel and iron substrates from corroding prior to erection. Heavy Duty Inhibitive Primers are VOC and HAPS compliant and contain no heavy metals. These primers contain a high level of inhibitive pigment to increase corrosion resistance, thereby extending exposure time before top-coating becomes necessary - the primers of choice for long-term protection.

MAGIC CAST 353 ZMG is an alcohol base, zircon/graphite refractory coating. MAGIC CAST 353 ZMG has been formulated to substantially reduce metal penetration and burn on defects that can be encountered with medium and heavy sectioned iron and steel castings. The coating is supplied in a heavy slurry form. MAGIC CAST 353 ZMG can be applied by flow coating, brushing, swabbing or spraying.

ES-606 is formulated as a direct-to-metal coating. It exhibits excellent corrosion resistance, UV resistance and weathering qualities, along with good adhesion to ferrous and non-ferrous metals without complex pretreatment or primers. This two component coating is typically sprayed on internal and external surfaces of HVAC-R heat exchangers and related equipment. It is designed to be a robust spray-applied alternative to Heresite’s full immersion P-413 when components cannot be oven cured, logistics present challenges, or budgets necessitate spray application.

Hodacryl® ZR 00 is basic acrylic paint designed for application on steel, cast iron or. galvanized surfaces. Thanks to the content of anti-corrosion inhibitors based on zinc phosphate, it actively suppresses the formation or course of corrosion. The paint is characterized by very fast drying. Combines with top colors (emails). The coating system as a whole is designed for common outdoor environments or for indoor applications

Hodopur® W ER 10-1 is the two-component polyurethane glossy enamel is intended for industrial applications, airless application and longer service life of the coating system. It is applied to basic anti-corrosion paints (Hodopur, Hodepox) and forms the final coating. It can be applied to galvanized surfaces as a single-layer enamel (decorative layer). It is produced in a wide range of shades (RAL or according to an agreed color template). The coating system as a whole is designed for common corrosive environments. The created coating film is mechanically resistant (abrasion resistant), chemically stable and UV stable. Hodopur enamel coating systems ensure long-term protection of the substrate against weather conditions.

Glyptal® 1201B is a modified 1201, having greater viscosity and designed for use in applications where a heavier film is required for thread sealing gasket; may be used in vacuum atmospheres.

Master Stages™ Nocor® E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from inplant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.

FOAM KOTE 2001 is a high refractory/graphite modified coating designed for both ferrous and non-ferrous applications. FOAM KOTE 2001 can be applied by brushing, dipping, or spraying. The rheological properties of FOAM KOTE 2001 contribute to improved workability and consistency, thus providing improved surface finish and casting quality. Because of the excellent suspension of FOAM KOTE 2001 minimal settling occurs which allows for easy re-dispersion. The coating is designed to be reduced with water at the customer’s facility.

Sumter Coatings Heavy Duty Inhibitive Primers 100D9944 is a high solids, rust inhibitive Alkyd primers designed to protect steel and iron substrates from corroding prior to erection. Heavy Duty Inhibitive Primers are VOC and HAPS compliant and contain no heavy metals. These primers contain a high level of inhibitive pigment to increase corrosion resistance, thereby extending exposure time before top-coating becomes necessary - the primers of choice for long-term protection.

E-Phos 661 is a dark gray coating that produces fine-grained crystalline coatings on iron and steel at coating weights of 2000+ mg/ft2. E-Phos 661 can operate at temperatures as low as 140°F and with up to 34% less sludging.

Virden Products Urethane No. 12 Elastomeric Coating was developed especially for repairing of roofs of metal buildings and for complete repair of cracks in swimming pools. There will be hundreds of other places where the UE #12 will be the only material that can serve. It is applied by brushing.

Black Bitumen Paint is a medium viscosity bitumen reduced with a C9-C12 petroleum derived hydrocarbon. It is black in appearance, mobile and compatible as a waterproof protective coating for a wide variety of substrates (iron, steel, lead, zinc, aluminum, asbestos, cement, concrete, stone, wood, felt and brick). When dry, the product forms an odorless and taint-free black film. It can be used for metal protection and overcoating of wood and felt roofing. For large civil projects, it meets the requirements of a highways/civil engineering grade cutback bitumen.

L&L #300 Mastic EXP is a high-build, waterborne, elastomeric barrier coating. Its unique blend of premium acrylic resins and pigments combine to form a durable, mildew-resistant film with exceptional adhesion and flexibility. L&L 300 is a breathing mastic which allows damaging substrate moisture to escape, while protecting against ultra-violet, water and air-flow intrusion.

Hodejka® ER 50-3 is the synthetic top enamel in a semi-matt design is intended for application on basic paints (Hodejka) and forms the final coating layer. It is produced in a wide range of shades (RAL or according to an agreed color template). The coating system as a whole is designed for common outdoor environments or for indoor applications.

HP-105 is a 2 component coating system having antimicrobial properties. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.

Hodisol® JR 00-4 is single-layer alkyd urethane semi-matt paint intended for application on steel and cast iron surfaces or surfaces provided with the original coating system. Thanks to the content of anti-corrosion inhibitors based on zinc phosphate, it actively suppresses the formation or course of corrosion. The paint also serves as a top coat to protect the substrate from the weather. It is characterized by high yield and high utility properties. The paint is designed for common outdoor environments or for indoor applications.