Products in Paints & Coatings: Ceramic

ELASTOSIL® AUX G 3244 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

ELASTOSIL® AUX G 3242 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

ELASTOSIL® AUX G 3246 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

HYDRACOAT is the go-to conformal coating for electronics. With top-notch resistance to humidity, moisture, and weather, it offers lasting protection in any setting. Non-conductive and adhesive, it works seamlessly on plastics, glass, ceramic, and metal. Plus, it's non-flammable and water-resistant, making it perfect for defense, automotive, LED, medical, naval, and printed circuit board applications.

Nyacol® K-Sol is a water-dilutable solution containing potassium methyl siliconate. It's crafted for surface treatment applications, leveraging its capability to provide water repellency and decrease water absorption on surfaces.

Farboset® 9020 is a nonanhydride epoxy powder coating known for its excellent moisture resistance. It is specifically designed for encapsulating components such as ceramic and film capacitors, coils, thermistors, and resistors. This coating helps protect these components from moisture and environmental factors, ensuring their performance and reliability. Farboset® 9020 can be applied using various methods, including fluidized bed, wheel coaters, and electrostatic spray techniques.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

HeBoCoat®EL-W 250 is a highly concentrated water-based Boron Nitride coating for use in the aluminum casting industry and in the finishing of fiber glass.

HeBoCoat ® SL-E 125* is a boron nitride spray supplied in an easy-to-use aerosol can. The use of an ethanol base ensures good surface wetting of the coated substrate as well as quick drying. The inorganic binders ensure very good adhesion to metals, glass, ceramics and graphite, especially at high temperatures. The proportion of fine boron nitride particles endow the resultant coating with good release and lubricating properties. HeBoCoat® SL-E 125 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables good substrate wetting and quick drying. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HeBoCoat® PL-E 125 is a Boron Nitride coating in an ethanol base with the addition of an inorganic binder. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use. Klenk's Epoxy Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.

Nickel Conductive Pen 841AR-P pen dispenses an acrylic lacquer pigmented with conductive nickel flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications requiring lower resistance, use the 842AR-P Silver Conductive Pen. For a more economical alternative, use the 838AR-P Carbon Conductive Pen.

838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.

Circa 1850® NU-LUSTRE-CR is a thick, high gloss epoxy Clear Casting Resin. One coat of NU-LUSTRE-CR equals up to 70 coats of varnish. NU-LUSTRE-CR is HEAT-Stable, remaining clear when other epoxies will haze or deform when hot objects are placed upon the surface. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-CR is the ideal coating for molds, tables, decorated serving trays, coasters and bar tops, and more.

Andisil® SPR 2833 Clear is a reactive silicone primer that can be used to improve adhesion of various RTV silicones to a variety of substrates including: metal, wood, glass, ceramics and many plastics. It is useful in formulations where a clear primer is preferred.

Advanced Technical Products Supply ATP-R20 is used as a protective coating with excellent lubrication and is used in hot pressing and glass forming.

Advanced Technical Products Supply ATP-R10B2 is a protective coating with excellent lubrication and is used in launders & runners, auto-pour ladles, troughs & tubes, etc.

Reviplus 1916 is a primer based on synthetic resins in dispersion. Aqueous primer for non-absorbent surfaces: adhesion promoter for leveling compounds. Applicable on non-porous materials, such as glazed ceramic tiles, compact or low-porous screeds/concrete, asphalt, glue residues or epoxy/polyurethane paints well adhering to the substrate.

CP-200 ES CONCENTRATE is a unique, solvent free, VOC compliant formulation that provides color enhancement and stain protection for natural stone, brick and masonry applications.

Advanced Technical Products Supply ATP-R33 is used as a protective coating with excellent lubrication and is used in immersion tubes, metal troughs, etc.

NANOMYTE® SuperAi-UVP is a nanocomposite coating with enhanced weatherability that imparts anti-icing and UV-protective properties to the underlying substrate. The transparent coating also provides a hard, dense and smooth finish. Surfaces treated with SuperAi-UVP are protected from the effects of UV radiation and exhibit reduced ice adhesion, thereby preventing ice buildup. The single component, ambient-cure coating can be applied to a variety of substrates, including plastics, metals, glass, and ceramics.

Advanced Technical Products Supply ATP-R12 is used as a protective coating with excellent lubrication and is used in the melting & casting of Aluminum, Magnesium, Zinc.

Advanced Technical Products Supply ATP-R11 is a protective coating with excellent lubrication and is used in launders & runners, auto-pour ladles, troughs & tubes, etc.

NANOMYTE® SR-100EC is a three-part transparent, micron-thick, liquid coating that provides both scratch resistance and easy-to-clean properties to a variety of surfaces. The surface treatment is mechanically robust, is highly repellent to water and oils, and enhances lubricity. It can be applied to plastics (such as polycarbonate, PMMA, PET, polyurethane, & epoxy) as well as metals (such as stainless steel, aluminum, titanium, brass and chrome). SR-100EC is thermally cured and ideally suited for optical lenses, touch screen protectors, stainless steel appliances, hand rails, and faucets.

NANOMYTE® SR-500EC-UVP is a transparent coating designed to provide easy-to-clean surfaces with excellent weatherability and UV protection for underlying substrates. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC-UVP is a single component product that is easily applied by dip, spray or brush techniques and cured at room temperature.