Products in Ready-to-Use Products: Top Coat

COLORCOAT AL-ESTER is a single component, liquid applied, moisturecured, aliphatic polyester-polyurethane surface protection coating. COLORCOAT AL-ESTER is a wear surface and waterproofing topcoat used in the TUFFLEX Systems. When COLORCOAT AL-ESTER is incorporated into these systems, it helps to protect concrete and plywood decks, parking structures, mechanical equipment pads and areas that require a seamless membrane system for protection against water damage. It can also be used on substrates in industrial locations, heavy vehicular and pedestrian traffic areas, and on many other properly prepared substrates. COLORCOAT AL-ESTER can also be used as a topcoat for polyurethane athletic track surfaces that need protection from oils, greases, mild chemical spillage and ultraviolet light. Do not use in areas of water immersion such as water parks and ponds.

JAXSAN® 601 are water thinnable and environmentally safe coatings. These premium quality acrylic latex coatings are a perfect choice when it comes to protection and waterproofing of roofs and thermal insulation. Their carefully balanced blend of toughness and 250% elongation makes them ideal waterproofing for metal buildings.

Onyx Concrete Coatings Epoxy Top Coat is a two component, high performance cycloaliphatic epoxy concrete floor coating system. The epoxy chemistry provides chemical resistance and excellent bonding characteristics. Epoxy Top Coat can be applied as a 16 to 50 mil coating system or a finish coat over another high build system and its design features make Epoxy Top Coat the top coating of choice.

Pacific Resins & Coatings MIL-PRF-85285 TY IV, Cl H is a two-component, high solid, aliphatic polyurethane coating that is designed for aircraft application with extended weatherability. This coating is resistant to chemicals, solvents and abrasion.

Westcoat EC-34 Epoxy Topcoat is a two-component, 100% solids, medium viscosity, low odor, high-build, chemical resistant epoxy.

HCF™ Heat Cure FDA Compliant is a scientifically formulated coating that uses nanotechnology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic or rubber part release. HCF coating can be used where food or medical applications are needed, and is designed to be applied when the mold is out of the press.

Camger ML-200 Black Gloss Lacquer is designed as the final finish coat and protective barrier over the appropriate sealer/primer to give the wood a rich, warm patina over time.

Racine Flame Spray RSG-C250 belongs to a family of high release coatings. The RSG coatings are the premium products, with a tough gray silicone topcoat over a wear resistant ceramic base. The choice of base material is determined primarily by electrical conductivity requirements.

SL EPOXY (CLEAR) is two-component low-odor, 100% solids, high-build epoxy floor coating designed for applications where heavy-duty protection is required. Easy-touse, self-leveling and delivers a high gloss and chemically resistant surface. As part of metallic coating systems, may be combined with metallic powder as a color coat.

Plus® topcoats are lubricated sealers specially engineered for application over Geomet® basecoats. These topcoats provide controlled friction coefficient of threaded parts and increase the resistance to corrosion. The controlled sacrificial corrosion protection mechanism of Geomet® basecoats is further improved with the addition of Plus® topcoats.

Aqua Coat Tabletop Commercial Finish (Self-Cross Linking) is a ready-to-use, single component, waterborne urethane acrylic polymer. Designed for maximum protection and durability. This innovative self-cross linking water-based urethane provides the durability and warm amber look of traditional solvent-based urethanes, but is quick drying, low odor and water clean-up. Not suitable over white finishes due to amber hue. Can be used on furniture, cabinets, and other high traffic areas.

Polyglass Coatings G90 Low VOC Topcoat is a two component, highly cross-linked, high performance polyester polyurethane coating providing a high gloss surface finish.

Rayston Silver 1k is a top coat and primer coating, single pack moisture curing polyurethane coating filled with aluminum pigment. It provides excellent resistance to atmospheric influence and abrasion, to UV and color stability and improves anticorrosion and barrier properties. It can be applied as single layer coating.

Consolidated Coatings Transportation Acrylic Urethane Gloss 52-2500 is a high build, high performance, two component aliphatic urethane.,.

Eagle Bridges Marathon Black Tire dressing RTS Gloss 5179 is a water-based tire coating designed to cover imperfections on retread tires. It is environmentally friendly and safe for workers and easy to clean with water.

Excel-Coat Acrylic Lacquer Sealer is intended to provide a clear top coat for interior and exterior areas such as walking decks, balconies, patios, stairways, driveways, and pool areas. Existing Excel-Coat K/D & K/D II systems and two-tone textures, as well as stamped concrete surfaces, are suitable substrates for the Excel-Coat Acrylic Lacquer Sealer. Excel-Coat Acrylic Lacquer Sealer provides long-lasting protection and easy surface maintenance.

Two-component epoxy topcoat EP S 2321 is designed for top coatings of metals, concrete, masonry and plastics. Completely hardened, it is extremely resistant to chemicals, oils and moisture as well. In combination with other epoxy paints - primer and intercoat - provides the best corrosion protection. The paint Rokoemail EP S 2321 is certified for indirect contact with food. Weather induced chalking.

Genteel Coatings 4000 topcoat is a two component, Acrylic Urethane. This urethane topcoat is designed to provide excellent UV protection and long-lasting durability for Light Industrial, Transportation and Fleet. 4000 topcoats offer excellent abrasion and moisture resistance with exceptional gloss, distinctiveness of image and color retention. 4000 Topcoat offers exceptional chemical resistances.

Williams Hayward Protective Coatings Acrylem (1K) Waterborne Acrylic Latex Copolymer is waterborne latex single component copolymer with dehydrated V.O.C. of 1.0 - 2.4 lbs. per gallon. For use as a primer-topcoat or direct-to-metal paint. Possesses gloss of 85-95% 60 deg head, with gloss retention comparable to many two-component urethanes. Forward and reverse impact of 100-130, with very good abrasion resistance. Chemical resistance is limited to dilute acids or alkali.

Mascoat® 600P is a premium, silicone copolymer high-heat coating effective on steel surfaces operating up to 600°F. The VOC-compliant coating may be used direct-to-metal or top-coated with a variety of Mascoat’s insulating coatings or topcoats, as specified. The product can be top-coated in 2 hours and put into service in just 12 hours.

CTM Coatings PACT-9500 is a two-component, 95% solids, VOC compliant, polyaspartic coating that was developed as a low odor topcoat. The product contains a UV protector. It provides a glossy finish with superior chemical resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA).

Pacific Resins & Coatings MIL-PRF-85285 TY II, Cl H is a two-component, high solids, aliphatic polyurethane coating that is resistant to chemicals, solvents, and abrasion.

Onyx Concrete Coatings Polyaspartic 100 is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. Polyaspartic 100 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT). For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100 is simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Magni 265 is a chrome-free duplex coating engineered for use on vehicle stampings and other structural components. Combining an inorganic zinc- rich basecoat with a high-performance organic topcoat, Magni 265 delivers exceptional corrosion protection on the interior and exterior of these structural components. Since it is applied after fabrication, Magni 265 provides excellent corrosion protection at the weld and heat-affect area. Unlike conventional e-coat, Magni 265 will provide extended field protection, often allowing for use of thinner-gage steel and lighter-weight components.

CHEM-THANE DCP RR is a fast curing, two component aliphatic polyaspartic polyurea topcoat. It has superior color and gloss retention and meets or exceeds SSPC Paint Specifications 36, 38 and 39 Level 3 weathering performance requirements.

EnergyGuard Aromatic Polyurethane is a solvent-based, single component, moisture cure, high solids, polyurethane roof coating.

Perdure E10 is a 100% solids, multipurpose epoxy binder for Düraamen self-leveling mortar and quartz systems. Perdure E10 all-purpose epoxy resin is characterized as an excellent general-purpose material with good clarity and color retention. Perdure E10 is essentially odorless and therefore can be applied in occupied areas.

ProvisionGard™ Carton Top Coat/Kraft Liner Waterbase Coating PGT23207 is waterbase coating PGT 23207 is a patented formulation with an insect growth inhibitor for application via sheet fed and flexo presses on paper, paperboard and linerboard. This fast drying coating imparts engineered COF, gloss and abrasion resistance and protects dry food products from stored-product insect infestation. It is recommended that this topcoat be thoroughly tested to confirm that it processes and performs as required.

Williams Hayward Protective Coatings Acralust Acrylic-Alkyd is high-Solids solvent borne acrylic modified alkyd for use as a topcoat or direct-tometal. Has improved gloss and gloss retention than a conventional alkyd. Acralust is available in both 3.5 & 2.8 V.O.C. formulations.

Virus® DIGI PRO is suitable for hybrid digital printing on white fabric; enhances the result of the digital print as regards solid colors and half tones. DIGI-PRO can also be used as top-coat to protect the digital printing. Perfect transparency, matte finishing, soft touch and extraordinary washing resistance.

Polyglass Coatings Excel d2m and is a two component highly cross-linked, high performance polyester polyurethane coating. Excel d2m and d2m (HS) provide excellent adhesion over a wide range of surfaces.

QC™ Quick Cure – has been scientifically formulated with the use of nanotechnology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic part release. QC coating is designed to be used on all plastics and is applied in the press.

Eagle Bridges Marathon Black Tire dressing HH RT 5219 is a hh water-based tire coating designed to cover imperfections on retread tires. It is environmentally friendly and safe for workers and easy to clean with water.

PolyBrite® 55 is an elastomeric roof coating specially developed for application over new Sprayed Polyurethane Foam (SPF) roof systems. It is formulated for superior adhesion over foam. It employs a highly flexible acrylic polymer for enhanced thermal expansion and contraction capabilities typical of roofing foam surfaces.

Magni 565 is a chrome-free duplex coating that combines an inorganic zinc-rich basecoat with an aluminum-rich organic topcoat. Formulated as a two-coat system and resistant to automotive fuels and fluids, Magni 565 is the preferred fastener coating of leading global automotive manufacturers. It provides superior corrosion protection and cost-effectiveness and is typically applied to externally threaded fasteners, stampings and other hardware.