Products in Ready-to-Use Products: Epoxy Coating

CIM® EMT Primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

Intumax EP1115 is a unique two component epoxy fire retardant – intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAXEP1115 forms a continuous char foam that protects products from both heat and flame. The active ingredients in INTUMAX_x005F_x0004_ products are not water soluble and will not leach out over time. INTUMAX_x005F_x0004_ EP1115 is recommended for use as a base resin for specialty coatings. The viscosity is easily reduced by the addition of solvents. Pigments, antisettling agents and other flame retardants may also be incorporated.

Diamite Brushkote VOC is a water based, high performance epoxy coating intended to protect a wide range of substrates from abrasion and chemical attack. Diamite Brushkote VOC is totally VOC compliant, allowing application indoors without toxic odors and is an excellent choice where an easy to clean and durable surface is desired.

CChemtek Products CF-660 is a two component epoxy striping paint that creates bold and permanent traffic striping lines that with outlast and outwear regular traffic striping paints.

ZINC RICH EP is an organic ZINC RICH Epoxy system recommended for use in the new construction and maintenance. ZINC RICH EP provides cathodic protection of reinforcement steel thus prevents the corrosion of construction rebars.

PERMACOAT 6500 is a 100% solids epoxy novolac containment and/or floor coating system. The PERMACOAT 6500 is specifically designed as a containment product for industrial solvents and acids. PERMACOAT 6500 consists of two components, resin and hardener, in both the horizontal and vertical formulations. The application of the PERMACOAT 6500 is accomplished with rubber squeegees and short nap paint rollers.

TERRAZZCO® Flexa-Flex Joint Filler 1200 is a 100% solids (VOC free), two-component, flexible joint filler. The unique combination of hardness and flexibility allows TERRAZZCO® Flexa-Flex Joint Filler 1200 to absorb the impact and shock of heavy loads while sealing joints encountered in terrazzo flooring.

Res-Tek EPO-Guard™ EPO-204 Top Coat is a low odor, clear, high gloss, 100% solids, 2-component, epoxy flooring topcoat material designed to grout, seal, and protect. EPO-204 can be lightly broadcast with aluminum oxide or other aggregate to enhance slip resistance. It also provides improved UV, abrasion, and impact resistance, as well as protection from mild chemical attack.

Drew Paints 52 Series Drew Mastic High Build Epoxy Mastic is a self priming, surface tolerant high build coating that is designed to be applied to hand and/or power tool cleaned substrates. Drew Mastic has good chemical resistance for splash/spill exposure.

Jyoti Ceramic Aluma-Coat TW comprises of sintered sapphire hard aluminum oxide ceramic micro beads doped in resin, designed to resist chemical attack, cavitations, abrasion, moderate impact and also withstand maximum temperature upto 150°C / 302°F. It can be applied on any surface such as ferrous, non-ferrous metals, stone, concrete, wood, plastics etc.

Epoplex® LS50 is a two-component, 100% solids epoxy coating material designed as a rapid setting highway marking coating that provides durability and corrosion and abrasion resistance. Epoplex® LS50 is formulated to provide a simple volumetric mixing ratio of two volumes of Component A to one volume of Component B.

Poly-Chemcure PC-2.8 is a high-performing, very fast recoat, sandable, two component, VOC conforming (2.8lbs./gal./low HAPS) Amine Cured Epoxy that will cure at temperatures down to 20°F. PC-2.8 Epoxy Primer is specially modified with a proprietary blend of selective resins, wetting agents and penetrants to provide excellent adhesion and protection to properly prepared carbon steel, galvanized steel, and aluminum surfaces. Depending on the temperature, the fast setting PC-2.8 can be recoated in 90 – 105 minutes. PC-2.8 High Production Epoxy Primer is used as a regular and high build primer under a wide variety of Epoxy and Polyurethane topcoats.

VAPORTIGHT COAT® SG2 is a unique 2-component, alkali resistant, moisture tolerant, extremely high density and chemically enhanced epoxy based product which prevents capillary infiltration of oil and other chemicals from the ground. Applied in one coat, SG2 reduces the passage of water vapor and moisture through slabs and walls, thus eliminating delamination of adhesives, floor coverings and coatings.

Steel Primer (732) is a 92% solids, two-component epoxy primer used primarily over steel substrate materials to promote adhesion. SteelPrime has been formulated for interior or exterior use, meets VOC regulations and is USDA approved. For best results against abrasion and chemical resistance, this primer should not be used without a topcoat application.

Aiflooring LV BaseCoat is designed to be used as a basecoat for the TerraChip System. It has a lower viscosity than standard TC Basecoat for easier handling, especially in cooler temperatures. Scrape times for the LV Basecoat can be adjusted by using one, or a blend, of the 3 BaseCoat hardeners- Standard, Redline, and Infrared. LV BaseCoat is a two component 100% solids epoxy.

SPARTACOTE® Surface Build is a high solids, multipurpose, self-leveling epoxy for decorative and protective applications. It offers excellent abrasion and chemical resistance. Provided as a clear epoxy product it can be field tinted through the use of SPARTACOTE Universal Pigments.

The CreteFx® Fusion clear topcoat system provides a supremely durable added layer of protection, with the benefit of UV resistance, and it’s available in three gloss level options.

CTM Coatings ECTR-VRM is a 100% solid, two component epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECT-VRM-2000 provides excellent resistance to abrasion and chemical resistance. ECTR-VRM meets many requirements such as durability, performance as well as esthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

Pilgrim Permocoat LO Primer is a two component high build epoxy primer containing rust inhibitor pigments, formulated for use on steel and for the protection of equipment and parts from impact, abrasion, detergents, salt water, steam and oils. May also be used as a general maintenance primer. Recommended for use as a primer on steel surfaces subject to fresh water immersion, salt water immersion, tidal and splash zone exposures, buried exposure, and for interiors of tanks and lines containing crude oil, salt brine, and petroleum products.

E-Bond 100 Penetrating Sealer is a very low viscosity, two component epoxy specially formulated to penetrate and seal concrete, masonry, rusted steel and most chalky coatings. It is available in amber clear and non-opaque off-white. When used as recommended, it is 100% solids, zero VOC, and will not shrink or entrap solvent upon curing.

CHEM-HCR coating is a two-component, solvent free ep floor coating system that is high in chemical resistance. CHE HCR coating produces a dense tile like coating that will prot walls and floors. CHEM-HCR can be applied on both concr and steel surfaces.

Uroflex™ 61 is a two component, 100% solid urethane‐modified‐epoxy (UME) hybrid coating and/or lining system specifically designed for utilization in potable, drinking water environments. Uroflex™ 61 is certified by UL to NSF/ANSI Standard 61. Uroflex™ 61 is a high‐build, self‐leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete, steel, and wood. Uroflex™ 61 is applicator friendly and easy to apply; conveniently produced in a one‐to‐one mix ratio by volume. Uroflex™ 61 is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent)‐ certified UL to NSF/ANSI Standard 61.

EPWA27 Abradable Attrition Coatings is also known as PX/HX 443D. It is a graphite-filled two-part attrition compound that has almost totally replaced an earlier multi-coat spray system. An alternative version is EPWA27 is available that was designed to provide a 1:1 mix ratio. This product is not formally adopted but it represents an identical composition to EPWA27 when the two parts are mixed.

ArmorBond (730) is a two (2) component, 100% solids epoxy polymer Base Coat system for medium and general use applications where a normal cure formulation can be tolerated. Blended with select aggregates, this system can be trowel applied as an overlay system or applied as a slurry system with optional broadcast aggregate. 730 ArmorBond, when coated with one of the appropriate topcoats, provides very good impact, abrasion and chemical resistance characteristics.

Hempadur 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Iso-Flex® 609 Epoxy Crack Sealer is a two-component, 100% solids, moisture tolerant epoxy penetrating concrete sealer and hairline crack sealer. It is a very low viscosity resin possessing excellent wetting characteristics and adhesion to both dry and damp concrete.

Aiflooring TerraSeal is designed to be used as a stand-alone thin film system, a silica broadcast system, and the topcoat for the TerraRich system. It provides continuous chemical protection while providing a high-gloss, nonblushing finish for an outstanding appearance. It can be applied from 16-65 mils in smooth or anti-skid applications with moderate physical requirements and intermittent chemical exposure. TerraGrip can be added to TerraSeal to provide slip resistance. It is a two component 100% solids epoxy coatings cured with a cycloaliphatic amine.

Chem-Seal 17 is a two component low viscosity, solvented-epoxy clear sealer and primer for concrete substrate.

Cactus Industrial Cleankeep 5000 DW is a solvent-free epoxy for us in drinking water tanks. It contains no solvent and minimizes the risk of solvent contamination. It is a solvent free epoxy coating.

Ktisepox an easy to apply simple flooring solution! Ktisepox has been developed for customers who are looking for a quick and easy way to improve the performance of their floors. This epoxy floor paint is suitable for floors that have light to medium traffic. The product forms a seamless surface protecting the floor from water, oils and other chemicals.

PERMACOAT 3000 CT is a 100% solids epoxy floor coating designed for cool weather applications between 45 - 65 °F. The PERMACOAT 3000 CT system is applied as a two or three coat (30 - 90 mils) flooring material incorporating a broadcast of various blends of graded silica between coats. The system consists of two components, resin and hardener, in both horizontal and vertical formulations. Application of PERMACOAT 3000 CT is accomplished with rubber squeegees and short nap paint rollers.

MICOROX® 1295 Sealer is a 100% solids, 2 component epoxy sealer designed as a coating for concrete floors and a sealer for other MICOROX® FLOORING SYSTEMS. It is ideal for commercial, institutional, and light manufacturing areas where a high-quality coating or sealer is required. 1295 Sealer offers a durable abrasion resistant surface. It provides excellent resistance to many common industrial chemicals, grease, oil, and cleaning compounds. Excellent handling characteristics provide easy installation using brush, roller, and other common application techniques. 1295 can also be used as a base for colored vinyl flake floors.

DecoTop Clear Plus (707) is a two (2) component 100% solids waterclear epoxy that is specifically formulated to be a highperformance, U.V. resistant, extremely durable, high gloss protective coating. Deco Top Clear is expressly recommended for interior applications.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

QuestMark Flooring Standard Food Formulation Epoxy Patch - CM2123 is a three component 100% solids epoxy mortar designed for applications where floors are subjected to repeated exposure to hot water cleanings.