Products in Ready-to-Use Products: 2K (2 component) Coating

Arma 400 is two-component 100% solid cast urethane elastomer is recommended for high temperature applications where thermal stability is required. Often used for dump-truck beds, this product provides a hard, glossy surface necessary for smooth movement of cargo during tilt unloading.

Arma 901-90AS (800% Elongation) is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Watson Coatings Armorex C1000HS is a non-sacraficial solvent-based, two-component polyurethane anti-graffiti coating for use on concrete, steel, building exteriors or anywhere that vandals may strike.

EPACRETE EPAPOX BUS is a solvent-free three-component system, particularly suitable as an adhesion promoter and impregnating agent for damp cementitious surfaces.

Belzona 4151 FN10008 is a concrete protection system for the treatment of surfaces exposed to chemical attack and abrasion. Also for grouting and bonding. A two component clear amber resin system with excellent adhesion to masonry and metallic surfaces. Provides a tough seamless coating suitable for heavy duty dust proofing or protection from chemicals.

Arostruct® is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

DUR-A-GLAZE® ESD PRIMER is a 2-component, 100% solids Static Dissipative Primer. This coating was designed as a concrete primer for DUR-A-GARD ESD. It provides a static dissipative reading of 10⁶ -10⁹ Ω/sq. It provides an average of 14v Body Voltage Generation when utilizing dissipative footwear. Resistance readings are consistent for the life of the floor and are independent of ambient humidity.

Vosschemie Benelux SL Epoxy Filler Universal Gray A+B is a 2-component epoxy finishing putty for filling irregularities and holes in polyester, epoxy or wood for both above and below the waterline of the boat.

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

Intumax EP200C is a unique two component epoxy fire retardant – intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX®EP-200C forms a continuous char foam that protects products from both heat and flame. The active ingredients in INTUMAX® products are not water soluble and will not leach out over time. INTUMAX®EP-200C is recommended for use as a base resin for specialty coatings. The viscosity is easily reduced by the addition of solvents. Pigments, anti- settling agents and other flame retardants may also be incorporated.

Watson Coatings Armorex TP402HS is a non-sacraficial solvent-based, two-component polyurethane anti-graffiti coating for use on concrete, steel, building exteriors or anywhere that vandals may strike.

Vosschemie Benelux SL Epoxy Primer Anti-Corrosion A+B is a high-quality 2-component solvent-free epoxy primer on an amine basis. The cured layer has a very high resistance capacity and is a good barrier against water. The cured layer does not allow water (vapor) to pass through.

Ecological Coatings - Vehicle Protective Pigmented Coating 6000 Seriesroad grime, road salts, mud, snow, ice and hauled materials, requires advanced technology coatings specifically Ecological Coatings - Vehicle Protective Clear Coat 6000 Seriesformulated to enable your vehicle to perform its task at optimum efficiency and longevity.

Vosschemie Benelux SL Epoxy Light Primer White A+B is a high quality 2-component epoxy primer which is an excellent preparation coat for paints and topcoats.

Ply-Guard AS (Ultra Flex) is a new-generation, high-gloss, fast curing, two-component aliphatic polyaspartic polyurea topcoat that provides superior flexibility in addition to superior color and gloss retention.

Polaroof RAC-OZ™ is a two-component liquid urethane system that incorporates oxazolidone performance enhancements. chemistry. It cures to a reflective state. a rubber-like finish that is outstanding toughness and durability POLAROOF RAC-OZ is an energy supplement. -highly effective waterproofing membrane that is resistant to the spread of fire and is intended for situations in which tensile strength, chemical and oil resistance, and total waterproofness surface area is required.

Polin EP 9115 is a two component water based epoxy paint primer.

Delta® AntiCor DTS 2K - SG 40 is a type 2K polyurethane paint based on acrylic / containing solvents.

Northern Industries NI-21 100% Epoxy is an odorless two component coating designed to resist high wear and harsh chemicals when applied to floors and walls. Its high gloss finish and self-leveling characteristic make it excellent for high build applications. When the two components are combined, a conversion from a liquid epoxy to a thermoset solid occurs. The result is a highly durable finish that is easy to clean.

Watertite WS - Wearing Surface is a two part, polymeric MDI cured, polybutadiene modified blocked polyurethane coating.

QuestMark Flooring High Build Epoxy Coating - CM3707 is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. Recommended for a high build topcoat or basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.

Cipadam® S-15 Ultra is part of a two-coat protection system that prevents the intrusion of chlorides and water. The two-coat system consists of a base coat of CIPADAM® S-15 which is a silane base that penetrates into the substrate and reduces chloride ion migration through cement materials. The top coat is CIPADECK® Paver and Concrete Sealer. It is a colorless acrylic resin in a solvent base or CIPADECK® Cure &amp

Elastiment® 962 is a two component epoxy-urethane primer which is modified with adhesion promoters. E-962 is used as an adhesion promoting primer when applying one or two part coatings onto most metallic or other “difficult to adhere to surfaces”. Surface must be clean, dry and free of all oxidation or corrosion. E-962 has excellent water and chemical resistance.

Minchem VE50 is a high-performance vinyl ester-based acid-resistant material designed to provide maximum resistance to aggressive chemical environments. It is typically provided in a two-component format comprising, a vinyl ester solution and a catalyzed filler powder, which can be altered, with varying granulometry to suit the required thickness and application.

PERMACOAT 4000 HT is a 100% solids epoxy floor coating designed for high temperature applications commonly found in many manufacturing processes. PERMACOAT 4000 HT is designed to withstand constant temperatures to 212°F (100°C) and intermittent exposures to 250°F (122°C). PERMACOAT 4000 consists of two components, resin and hardener, in both the horizontal and vertical formulations. Its application is accomplished with rubber squeegees and short nap paint rollers.

Delta® AntiCor DTS 2K - HG 80 is a high gloss, 2-component PUR primer and top coat with excellent adhesion properties on steel, aluminum, galvanized steel (zinc coating), powder coated substrates and many plastics (rigid PVC, ABS, polyester, etc.). Used in indoors and outdoors.

Cruspec 8000 Waterborne Industrial Maintenance Enamels is a highly durable, easy to apply maintenance enamel. Outstanding corrosion resistance in DTM applications. Excellent adhesion, fade resistance, abrasion resistance, & low VOC. Brush, roll, or spray.

Lorsol® 3624 HS (A+B) is a half-gloss PU varnish for wooden floors and it is a 2-component product with high solids.

Aqua Aero Pan coating is a two-component 100% solid self-leveling coating, applied to drain pans, water boxes etc. The corrosion resistance of Aqua Aero Pan coated drain pans is exceeding the quality of stainless steel drainpans at less than 30% of the cost, which is proven by independent laboratory tests.

AteCe Graphic Products B.V. WB3340 is a double side, short and extended delivery waterbased coating with gloss.

Simon Quimica Alinco 1610 is one component polyurethane enamel. This product is recommended for cargo vehichls and fleets because of its good mechanical properties.

Diamite Brushkote VOC is a water based, high performance epoxy coating intended to protect a wide range of substrates from abrasion and chemical attack. Diamite Brushkote VOC is totally VOC compliant, allowing application indoors without toxic odors and is an excellent choice where an easy to clean and durable surface is desired.

Plastifloor® 116 serves as adhesive primer for the application of Plastifloor® coatings, especially onto filled asphalt/bitumen substrates.

Aptek® 2512-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the encapsulation and protection of electronic devices mounted on printed circuit boards. For coating applications that require toughness, this system provides a combination of excellent flexibility and optimum tensile strength/elongation characteristics. This product was specifically designed to be resistant to JP-10 jet fuel and meet the rigorous requirements of MIL-I-46058C.

CIM® EMT Primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

QuestMark Flooring High Performance Urethane (High Gloss) - CM1321 is a two component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability.