Products in Ready-to-Use Products: Epoxy & Epoxy Derivatives

Translucent Epoxy, Encapsulating & Potting Compound 832C is a rigid, amber clear epoxy that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. Due to its low mixed viscosity, it can easily penetrate small gaps and cavities. It also provides excellent electrical insulation and protects components from static discharges, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

834B potting and encapsulating compound is a black, flame retardant, thermally conductive two-part epoxy that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. This product is designed for applications where thermal management and self-extinguishing are critical. It also provides excellent electrical insulation and protects components from static discharges, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals. This epoxy has a convenient 2:1 volume mix ratio, making it compatible with most dispensing equipment. 834B can be cured at room temperature or higher.

High Thermal Conductivity Epoxy, Encapsulating & Potting Compound 834HTC is a 2-part, black, rigid, flameretardant thermal epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. This epoxy resin is designed for applications where thermal management and selfextinguishing are critical. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

High Temperature Epoxy, Encapsulating & Potting Compound 832HT is a general purpose, rigid, black, 2-part high temperature epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. It is useful when extreme physical strength and chemical resistance are required. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

EC-1030FL is a 2 component, flexible, high temperature epoxy potting compound. EC-1030FL offers an open work time at room temperature and cures at elevated temperatures. EC-1030FL can withstand temperatures of over 175°C and stays flexible at very low temperatures.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

BD54190 is a two-part, mineral filled, room temperature cure, epoxy adhesive designed for the bonding of metals, ceramics, and many plastics. It cures at room temperature to a tough, semi-flexible material. It has good wetting to most surfaces and is free flowing to penetrate cavities and give good self-leveling and air release. Because it is a filled epoxy, it gives very good vibration and impact resistance. It gives good resistance to water, salt spray, inorganic acids and bases and most organic solvents. It was especially formulated to a 1 part a to 1 part b volume ratio mix for use in side by side cartridges and meter mix equipment. BD54190 can reach handling cure at room temperature within 16 to 20 hours, but it can be accelerated by the use of heat. Times and temperatures from 2 hours at 65°c to 20 minutes at 100°c are typical for many applications. The time to heat the substrate must also be taken into consideration. Cooler temperatures will also extend work time and cure time.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

BD5405 NS is a two-part, non-sag, room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It is a thixotropic paste consistency to prevent running and sagging it gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 20 – 30 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

102-11 is a black, flame-out, two component, epoxy potting and encapsulating compound. Product is designed to release entrapped air rapidly during cure resulting in a smooth, pinhole free surface. 102-11 is an improved, crack-resistant version of F947.Features Crack resistant, black, flame-out, epoxy compound. Room temperature cure, improved resistance to thermal cycling. Other properties similar to F947A/B.

BD54110 is a two-part, unfilled, room temperature cure, epoxy adhesive designed for the bonding of metals, ceramics, and many plastics. This product gives exceptional resistance to water, salt spray, inorganic acids and bases and most organic solvents. This product gives better water and temperature resistance than just about any standard 5 minute epoxy product on the market place. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is typically achieved at room temperature with 30 to 60 minutes with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

BD5460 is a two-part, epoxy hybrid room temperature cure adhesive designed industrial bonding, small potting and laminating where excellent strength and toughness, structural bonding, and mechanical and electrical properties are required. This 2-part adhesive cures at room temperature, exhibits good wetting, and develops high strength, low shrink bonds to most materials including fiberglass, ceramics, metals and many plastics. It has great dimensional stability over a wide range of temperatures. Fully cured bd5420 is a durable electrical insulator with resistance to water, weather, ozone and oxygen, various solvents, fuels, oils, alcohols, mild acids and alkalis and many other organic compounds including diesel fuel and gasoline. It is especially formulated for a 2:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 120 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD5410 is a two-part, unfilled room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 60 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

122-06 is a pad-printable, high dielectric constant, epoxy based, ink, and coating. This product features excellent adhesion to ITO (Indium Tin Oxide) sputtered surfaces, Kapton, glass and a variety of other surfaces. 122-06 is a pad-printable ink that is formulated for a higher dielectric constant, greater adhesion and higher chemical resistance than typical high dielectric constant inksFeatures High dielectric constant for capacitive layers

BD5425 is a two-part, unfilled room temperature cure, epoxy adhesive designed for bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 60 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD5405 flex is a two-part, unfilled rubber modified, room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 20 – 30 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD5405 is a two-part, room temperature cure, epoxy adhesive with good chemical resistance. It has a low viscosity for good substrate penetration and adhesion. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment.

BD5430 is a two-part, unfilled room temperature cure, epoxy adhesive designed for bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 240 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

BD5420 is a two-part, epoxy hybrid room temperature cure adhesive designed for bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 2:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 120 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

124-25 is a flexible, radio opaque ink/coating for application syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, and thermal aging. Some applications for 124-25 include, but are not limited to, manufacturing of medical devices and instruments.Features Abrasion resistant, solvent resistant epoxy ink

128-33 is a single component, silver filled, electrically conductive epoxy ink and adhesive suitable for application by syringe dispensing and pin transfer. This product is designed for assembling electrical components and features exceptional pot life, flexibility, and chemical resistance compared to typical conductive adhesives. With its unique balance of properties 128-33 is well-suited for bonding on a wide range of substrates including copper, silicon, glass, and gold among many others.Features High temperature single component conductive adhesive

BD54125 is a two-part, unfilled, room temperature cure, epoxy adhesive designed for bonding metals and plastics. The product gives very good vibration and impact resistance with high peel and shear strength. It has a low viscosity for good substrate penetration and adhesion. It gives excellent resistance to water, salt spray, inorganic acids and bases and most organic solvents. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment.

BD54420 is a two-part, epoxy hybrid room temperature cure adhesive designed for bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It is especially formulated for a 2:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 360 minutes with a full cure at room temperature within 24 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

124-17 is a flexible, pad printable radio opaque ink/coating for application by pad printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, and thermal aging. Some applications for 124-17 include, but are not limited to, manufacturing of medical devices and instruments.Features Abrasion resistant, solvent resistant epoxy ink

BD5402 is a two-part, room temperature cure, epoxy adhesive with good chemical resistance. It has a low viscosity for good substrate penetration and adhesion. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment.

102-11/B187 is a black, flame-out, two component, epoxy potting and encapsulating compound. Product is designed to release entrapped air rapidly during cure, resulting in a smooth, pinhole free surface. 102-11 is an improved, crack resistance version of F947.Features Excellent resistance to thermal shock Longer pot life. Requires mild heat cure.

Swiss Formula ACR is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on acrylic and fiberglass tubs,sinks, hot tubs, spas and jacuzzis. Swiss Formula ACR is available in White, as well as special order colors.

120-24 is a carbon filled, screen-printable, electrically conductive, epoxy-based ink and coating suitable for application by screen- printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-24 include, but are not limited to, printed potentiometers, printed resistors, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and anode coatings for tantalum capacitors. 118-41 is a 0.01 Ω/sq/mil silver version of this product.Features High temp epoxy ink, adheres to ITO and polyimide substrates

Fast Set Epoxy 8332 is a quick-set 2-part epoxy adhesive. Bonded parts need only be held together for eight to ten minutes before handling. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, woods, and most metals and plastics. This is a general-purpose adhesive suitable for household, industrial and manufacturing applications.

127-06 is a carbon filled, screen-printable, electrically conductive, epoxy based ink and coating suitable for application by screen- printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 127-06 include, but are not limited to, printed potentiometers, printed resistors, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and anode coatings for tantalum capacitors. 127-06 is a 5 kΩ/sq/mil version of 120-24 and features an extended screen life.Features High resistance ink, blend able with 120-24, ideal for strain gages.

Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use. Klenk's Epoxy Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

125-20 is a silver/silver chloride, one component, chemically resistant, medical electrode epoxy ink and coating suitable for application by screen-printing. This product features excellent adhesion to polyimide, polyester, polycarbonate, glass, and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone (MEK) and acetone as well as many other chemistries. It is also very resistant to scratching and creasing. Some applications for 125-20 include, but are not limited to, polymer thick film circuitry, trans-dermal drug delivery, ECG and EKG electrodes, defibrillator pads, tens electrodes and muscle stimulator electrodes. 125-20 is formulated to be screen-printed but can also be syringe dispensed, dipped and sprayed. The last two methods require dilution.Features Excellent Print Definition High Electrical Conductivity High Temperature Resistance Chemically Resistant Excellent Adhesion Long Screen Life Chemically resistant electrode ink

125-21 is a silver/silver chloride, one component, chemically resistant, medical electrode epoxy ink and coating suitable for application by screen-printing. This product features excellent adhesion to polyimide, polyester, polycarbonate, glass, and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone (MEK) and acetone as well as many other chemistries. It is also very resistant to scratching and creasing. Some applications for 125-21 include, but are not limited to, polymer thick film circuitry, trans-dermal drug delivery, ECG and EKG electrodes, defibrillator pads, tens electrodes and muscle stimulator electrodes. 125-21 is formulated to be screen-printed but can also be syringe dispensed, dipped and sprayed. The last two methods require dilution.Features Excellent Print Definition High Electrical Conductivity High Temperature Resistance Chemically Resistant Excellent Adhesion Long Screen Life Chemically resistant electrode ink