Products in Ready-to-Use Products: Electronic Components

Tergajet is a nonionic, low foaming phosphate free powdered cleaner for use in labware washers, manual and ultrasonic cleaning. Corrosion inhibited formula recommended for glassware, metals, plastic, ceramic, porcelain, rubber and fiberglass. Free rinsing for reliable results and no interfering residues. Passes inhibitory residue test Dilute 1:200. pH 11.5 Concentrated to save you money Phosphate-free, biodegradable and readily disposable Use to pass your cleaning validation tests for lab accreditation and plant inspection approval Low foaming heavy duty detergent for high performance results Free rinsing to give you reliable results and no interfering residues Ideal for under-counter and floor standing lab washing machines

CGSTAPE - 8558 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

Tergazyme is a concentrated, anionic detergent with protease enzyme for manual and ultrasonic cleaning. Excellent for removal of proteinaceous soils, tissue, blood and body fluids from glassware, metals, plastic, ceramic, porcelain, rubber and fiberglass with no interfering residues. Ideal as a cleaning agent in Reverse Osmosis and Ultra-Filtration Systems. USDA authorized. Dilute: 1:100. pH 9.5 Concentrated to save you money Biodegradable and readily disposable Replaces corrosive acids and hazardous solvents Protease enzyme removes proteinaceous soils, tissue, blood and body fluids Free rinsing to give you reliable results and no interfering residues Use to pass your cleaning validation tests for lab accreditation and plant inspection approval

FLASHBOND™ UV-3700F is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-3700F cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass. This filled system is excellent for when low viscosity systems are not ideal. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm).

SetWORX 90 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications. SetWORX 90 is BPA-Free and non-hazardous for shipping.

CGSTAPE - 8257S is a polyimide backing and silicone adhesive offers ex- cellent chemical and thermal resistance with excellent electrical insulating properties.

EPOXIBOND™ EB-109M-11 is a flexible, two components, low viscosity, clear epoxy adhesive for optical, medical, and semiconductor applications. This long working life adhesive can be cured at room temperature or with moderate heat and provides excellent adhesion to glass, quartz, metals, wood and most plastics.

Staticide® 8698 Conformal Coating Remover is used to remove a variety of conformal coating types from PCBs, including acrylic, silicone, and urethane. It can be used as a precision coating remover for specific areas or as a full immersion bath. With its fast stripping action, it easily prepares surfaces for solder rework and repair. It will not fade, crack, yellow, or discolor plastics under normal use conditions and is compatible with most materials used in electrical and electronic assemblies.

EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

CGSTAPE - 8258 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

Staticide® 8660 Freeze Spray Anti-Stat is a high-performance freeze spray that safely cools individual static-sensitive components with pinpoint accuracy. This helps in identifying failed electrical components such as resistors, capacitors, and relays. Unique to this formula is an added anti-stat that prevents corrosion-causing frost. As an added advantage, the static generation caused during the spray application is neutralized by this product, which further prevents damage to ESD-sensitive components.

SetWORX™ 411HP is a toughened, high strength, industrial grade structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. 411HP is a one component, heat cure, conductive epoxy adhesive. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications.

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

CGSTAPE - 8258K is a Kapton® HN backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

Staticide® 8604 Electronics Rinse VT is a cost-effective, non-flammable, general-purpose electronic component cleaner. This high-pressure cleaning agent is excellent at removing grease, oil, and flux residues. Its cleaning action removes contaminants while restoring efficiency and maintaining instrument precision. This low-odor aerosol, which was specially formulated for low environmental impact, rapidly disappears and leaves no trace.

Alconox® Powdered Precision Cleaner is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. USDA authorized. Dilute 1:100. pH 9.5 Concentrated to save you money Biodegradable and readily disposable Penetrating wetting power to save you time Free rinsing to give you reliable results and no interfering residues Use to pass your cleaning validation tests for lab accreditation and plant inspection approval

CGSTAPE - 8458 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (405nm) as well as down to 365nm. Flashbond UV-8300LV has been tested to and passes ISO-10993-5 for cytotoxicity.

ME-565 broadband electrically conductive isolation coating is a carbon-based paint in a proprietary water based acrylic resin system. It provides broadband RFID area isolation across all RFID frequencies in a thin, easy to apply format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush, roller or sprayed on. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-565 acts as a ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

ME-505 broadband Electrical isolation coating is a coated carbon based paint in a proprietary urethane (solvent based) resin. It provides broadband RF isolation in a thin format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush or sprayer or screen printed. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-505 is a lossy ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

CGSTAPE - 8468 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

EPOXIBOND™ EB-116 is high strength, structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties and is excellent for cryogenic applications. It is recommended for bonding glass, metal, ceramics, and engineering thermoplastics. Due to its low viscosity, it can be also used for potting and encapsulating electrical/electronic coponents

Staticide® 8607 Flux Remover No Clean EXTRA is a silicon-based cleaner and flux remover that is highly effective for removing silicon-based substrates. This fast evaporative flux remover leaves surfaces residue-free, making it ideal for cleaning through-hole, BGA pads, and SMT design circuit boards. The low surface tension formula allows access into hard-to-reach areas and rapid removal of all types of no-clean flux and pastes, oxide particles, carbon, organic residues, adhesives, silicone-based conformal coatings, and greases.

The 402A Super Duster™ 134 is a pure, non-flammable duster that can be used on live electronic and electrical equipment. The duster contains pure 1,1,1,2-tetrafluoroethane (HFC 134a), which delivers a constant, high-pressure cleaning jet. The gas jet is dry, low-residue, and chemically inert, which makes it safe for cleaning electrical and electronic components. The 402A duster is ideal for removing lint, dust, and other debris from printed circuit boards, electronic devices, and computers. It helps prevent malfunctions and lengthens component life.

CGSTAPE - 7858 (1) is a CGS’s top coated white polyimide film for electronics labeling is coated with an aggressive acrylic adhesive and backed with a kraft release liner.

CGSTAPE - 8459 is a polyimide backing and acrylic adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat are required.

FLASHBOND™ UV-5402 is a low viscosity, flexible, light curing epoxy adhesive that offers excellent strenth and flexibility for reduced cracking. UV-5402 is low viscosity and high elongation. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm) and can also cure down to 365nm.

CGSTAPE - 8358 is a polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required.

Staticide® 8601 Electronics Cleaner Degreaser PF is an extra-strength, fast-drying, one-step precision universal cleaner and degreaser that is safe for use on plastics. Formulated with very low surface tension, this high-pressure aerosol cleaner flushes even the hard-to-reach areas clean without leaving a residual film. The short residence time allows this powerful universal cleaner to evaporate instantly, leaving surfaces free from insulative contaminants.

TERAZYME GP™ is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TERAZYME GP™ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TERAZYME GP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

SetWORX™ 05 is a fast cure, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals.

Enviro-power® industrial all-purpose™ cleaner is an effective non-V.O.C. Formula. Cleans up grease, oil and stubborn soils. Use for industrial and commercial applications.

NuSil™ CV10-2500 is a controlled volatility silicone. For applications requiring low outgassing and minimal volatile condensable under extreme operating conditions.

GlobalTech® Isopropyl Alcohol & DI Water 70/30% blend (IPA/DI) is a non-aggressive universal cleaner, degreaser and disinfectant. Removes most types of inks, pastes, fluxes, light oils and other contaminates associated with assembly, machining, soldering and printing. Ideal for use in surface preparation prior to manufacturing or assembly processes. Saturated wipe material options: polyester, industrial grade and critical-clean. Available in Isopropyl Alcohol 99%.

RonJohn® Electra Strip is a liquid blend developed to safely remove varnish and epoxy adhesive sealers from electric motors so they can be disassembled. RonJohn® Electra Strip is specifically formulated for high effectiveness on difficult motor varnishes and epoxies. This product is designed to be used in a tank application where the parts can be immersed. Though you can use RonJohn® Electra Strip at room temperature, it can be safely heated up to 130F to accelerate the removal of the coatings. It is safe for use on metals, wood, fiberglass, concrete, and certain plastics like polyester, polyethylene, and nylon. It can soften or dissolve the toughest magnet wire coatings overnight – heating can cut this by more than half.

Silcoat 7031 is a silicone sealing and conforaml coating compound.