Products in Paper & Pulp Chemicals: Paper Tissue

LIOSIL® TS 40 E is a microemulsion of a functional silicone fluid specifically developed as a softener for the tissue industry. It offers excellent softness and a very good hydrophilic nature. The product is easily diluted with water and exhibits high substantivity on cellulose fibers. It is a microemulsion.

PULPSIL® 959 S is an aqueous solution of a hydrolytically stable polyether-modified silicone fluid. It offers several key characteristics, including improved cleaning properties compared to conventional mechanical cleaning methods, increased processing speed, low surface tension, good wetting properties, easy processing, and excellent solubility in water.

LIOSIL® TS 50 E is a specially developed microemulsion of a functional silicone fluid, designed as a softener specifically for the tissue industry. This product contains aloe vera, vitamin E, and a WACKER SILFOAM® antifoam agent. With its unique structure and orientation on cellulose fibers, LIOSIL® TS 50 E provides excellent softness and high hydrophilicity, resulting in a pleasant and gentle touch.

LIOSIL® MR 1003 is a nonionic micro emulsion of a reactive, aminofunctional silicone fluid. It offers excellent softness and a good hydrophilic nature. It can be easily diluted with water due to its low viscosity. The product exhibits high substantivity on cellulose fibers and allows water vapor permeability.

LIOSIL® TS 44 E US is a nonionic oil-in-water emulsion of highly viscous polydimethylsiloxane. It is specifically designed for formulating tissue softeners. The active ingredient enhances the lubricity and softness of tissue. LIOSIL® TS 44 E US can be easily diluted with water to create a ready-to-use emulsion. However, determining the optimal conditions will require conducting individual tests. It is recommended to stir well before use.

LIOSIL® TS 533 is a specially developed aqueous solution of a functional silicone fluid, designed as a softener specifically for the tissue industry. With its unique structure and orientation on cellulose fibers, LIOSIL® TS 533 provides a good soft touch and excellent hydrophilicity. It also exhibits high substantivity on cellulose fibers. Additionally, this product has obtained BfR/FDA approval.

CP Debond 637 is a concentrated mix of cationic fatty polyamide amine polymer with emulsifiers.

652 Softening Debonder are concentrated mixes of softening silicones, cationic fatty polyamide amine polymer with emulsifiers.

Dispelair® DP 592 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 131 is a hybrid deaerator for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® DP 510 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 356 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 536 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 600 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 131 is a hybrid deaerator for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® DP 362 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® Cyllube 108 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 151 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 357 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 836 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 763 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 355 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 793 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 636 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® Cyllube 112 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 710 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 351 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 792 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 594 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 711 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 364 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® Cyllube 102 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 790 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.