Products in Industrial Additives & Materials: Cationics

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Wetfix 312R is a 100% active lower odor antistrip that provides the best value for the money.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

Rediset LQ-1102C is a compaction aid for hot and warm mixes. Rediset LQ-1102C allows a reduction in mixing and paving temperatures while providing built in anti-stripping effect.

Redicote E-7000 is a emulsifier for anionic and cationic slow set bitumen emulsions suitable for tack, prime, slurry seal, dust oil and cold mix applications. Emulsifier for slow set emulsion used in sealcoat manufacture.

Use of Redicote E-33 together with regular cationic emulsifiers generally increases emulsion viscosity.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote C-500-1 is a emulsifier for cationic quick-set bitumen emulsions for quick-traffic slurry and micro surfacing.

Redicote C-471 is a emulsifier for cationic quick-set bitumen emulsions for slurry and micro surfacing

Redicote E-6945 is a co-emulsifier and stabilizer for slow-setting anionic bitumen emulsions used in sealcoats, slurry seal and non paving applications.

Rediset LQ-900 is a compaction aid for hot and warm mixes which allows a reduction in mixing and paving temperatures while providing active and passive adhesion.

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Redicote E-11 HF-1 is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins used for dust control and rejuvenating. Break retarder for slurry.

Redicote E-605 is a emulsifier for cationic medium-setting emulsions and tack coats. Emulsifier for oils and soft bitumen used in dust control emulsions.

Redicote C-450 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote C-320 is a emulsifier for cationic quick-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Redicote E-11 is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Redicote E-11 HF is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Kling Beta 2550(HM) is a liquid antistrip for hot mix asphalt.

Redicote EM-44A is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal, tack coat and open-graded cold mix. Emulsifier for slurry surfacing and cold mix when used with phosphoric acid.

Wetfix AP47 is a low hazard adhesion promoter and warm mix additive.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Perma-Tac 99 is a liquid antistrip for hot mix asphalt.

Wetfix AP17 is a adhesion promoter for hot and warm mix.

Redicote RM007 is a emulsifier for rapid and medium setting cationic bitumen emulsions.

Redicote E-17 is a liquid emulsifier formulated for cationic bitumen emulsions, particularly those with rapid- and medium-setting properties. These emulsions find application in various road construction processes, including chip seal, tack coat, and open-graded cold mix. In addition to emulsification, Redicote E-17 acts as an adhesion promoter, enhancing the bonding between bitumen and surfaces like pre-coated chips, cutback bitumen, or soft bitumen.

Redicote C-320E is a emulsifier for cationic slow-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing.

WWT 4690 is a high-charge, standard molecular-weight, cationic polyacrylamide in dry form. This product is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

WWT 3840 HIB is a structured, high-molecular-weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for very high-shear applications such as rotary presses, screw presses, and centrifuges.