Products in Fluids & Lubricants: Corrosion Resistant

LUBIMAX® 1609 is a high-performance additive package for formulating high quality crankcase oils with suitable base stocks. It is especially designed to provide superior deposit control, wear and rust control of engine components. Also, it meets the requirements of API SN, SM and SL in different base oils for a wide range of viscosity grades.

LUBIMAX® AW 2266 is a C6 secondary zinc dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 2266 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® 1603HT is a versatile additive package to formulate mid-tier crankcase lubricant oils for both diesel and gasoline engines. The HT – High TBN value and reasonably high level of zinc make it a multipurpose and cost efficient single additive package to meet a wide range of API level. By adding small amount of TBN or LUBIMAX booster, you can achieve up to SL or CF-4 level with this economic additive package. It provides superior deposit, wear and rust control along with oil oxidation protection in diesel and gasoline engines.

Neutral Calcium Sulfonates Syncal™ N45H is dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process.

Syncal™ OB405WO is a high quality overbased calcium sulfonate grease feed and lubricant component in a white oil diluent. Syncal™ OB405WO is produced from a proprietary long chain alkylbenzene sulfonic acid. Syncal™ OB405WO has been specifically designed for use in incidental contact, food grade lubricant applications. Greases made with Syncal™ OB405WO will convert readily and exhibit exceptional mechanical stability, high dropping points, good load carrying performance, along with reduced wear. Greases made from Syncal™ OB405WO will impart excellent resistance to water wash-out and corrosion.

LUBIMAX® G 336 is a premium quality gear oil additive package used to formulate both automotive and industrial gear oils with suitable base stocks. LUBIMAX® G 336 is designed to provide a superior performance of extreme pressure, rust protection, corrosion protection, thermal and oxidation stability.

K-Ox™ 9056 is a water displacing additive designed for formulating rust and corrosion inhibitors. K-Ox™ 9056 can be used to protect bright, ground, or highly polished steel surfaces. It is soluble in aliphatic solvents, low aromatic solvents, kerosene, and most oils. K-Ox™ 9056 imparts water displacing characteristics and offers rust and corrosion protection in high humidity, saltwater, and acid atmospheres. K-Ox™ 9056 can also be used in metalworking fluids and wax emulsions as a corrosion inhibitor when properly formulated with an amine such as triethanolamine.

NA-SUL® 1101 (formerly KX1101) is a high performance ashless corrosion inhibitor specifically designed for aluminum and zinc alloys. It is soluble in most oils and polyalphaolefins (PAO). It is also very easily emulsified. Due to the acid value of NA-SUL® 1101, contamination with alkaline cleaners, metalworking fluids, or other alkaline process chemicals may result in the formulation of gels or other unwanted by-products. Compatibility tests should be carried out in order to identify any negative interactions.

Syncal™ OB320 is specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB320 is excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.

RECALOFLOSSO® PT-02 is a low-viscosity K-type PFPE base oil with a sharp molecular weight distribution. It can be used as Perflouropolyether Base Oil for lubricants, greases, and vacuum fluid.

NA-SUL® CA/W1177 is an additive developed for use where water contact is likely such as dewatering fluids. NA-SUL® CA/W1177 combines excellent corrosion protection for steel with good water separation characteristics.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ MH is optimized for Marine engines operating with high sulfur fuel oil. With only 3 % of Nanol® POWER+ ML in lubricant our customers have witness 2-6% fuel savings.Nanol Power+ ML:Reduces frictionReduces wearCuts down emissionsSaves fuelProlongs lifetime of componentsImproves machinery efficiencyThe unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

Neutral Calcium Sulfonates Syncal™ N45H, 45LC, and N70H are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

NA-LUBE® AW-6400FG is an ashless rust and corrosion inhibitor and antiwear additive.

NA-SUL® CA-HT3 is a high performance rust and corrosion inhibitor offering exceptional rust protection with outstanding high temperature stability and good demulsibility. Contamination with large amounts of water should be avoided1 (e.g. rust preventive dewatering application).

Synbar™ OB70HF is a cost effective overbased barium sulfonate. This product will provide the formulator with excellent demulsibility, detergency, and optimal non-staining rust and corrosion protection, even under acidic conditions. Synbar™ OB70HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

NA-SUL® BSB is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of barium hydroxide.

RECALOFLOSSO® PT-54 is a medium viscosity K-type PFPE base oil with a sharp molecular weight distribution. It can be used as a Perflouropolyether Base Oil for lubricants and greases.

Soluble Base 5700 is a versatile sulfonate and PIBSA derived soluble oil emulsifier package. It is designed to emulsify paraffinic and naphthenic oils, as well as the more difficult re-refined oils that are primarily paraffinic in composition. Soluble Base 5700 offers hard water stability and rust inhibiting characteristics. In addition, the PIBSA technology provides exceptional system cleanliness by preventing buildup of soap and sludge in the sumps. In turn, this limits microbial growth and thereby enhances corrosion protection and extends fluid life.

Synbar™ OB70 (Overbased) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

NA-LUBE® AW-6110P is an ashless rust and corrosion inhibitor and antiwear additive.

PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication. PEL-HIB CC220 is very water soluble. In addition to its applications in metalworking fluids and coolants, cooling water and boiler operations, oil well and refinery operations, fuels, lubricants and greases, PEL-HIB CC220 also find its uses in inorganic coatings, organic coatings, and printing inks.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

K-CORR® SA-300 is an ashless rust inhibitor for industrial and automotive lubricants, greases and rust preventive fluids.

NA-SUL® CA-770FG is a premium rust inhibitor for petroleum and synthetic lubricants, greases, and rust preventive fluids. It provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks.

NA-LUBE® AO-130 is a liquid diphenylamine based antioxidant for mineral oil and synthetic based lubricants and greases.

Syncal™ OB400 is specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB400 is excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.

NA-SUL® BSN is a premium non-staining rust inhibitor for petroleum and synthetic lubricants, greases, rust preventive fluids and metalworking specialties. It provides excellent demulsibility and resistance to the negative effects of water and is compatible with a wide range of additives and base oils.

NA-SUL® CA-1183 is a liquid corrosion preventive additive designed for use where water contact is likely such as dewatering fluids. NA-SUL® CA-1183 provides excellent corrosion protection for steel, galvanized steel and aluminum with superior water separation characteristics.

NA-LUBE® BL-1300FG is a multifunctional rust and oxidation inhibiting additive package for food grade R&O Oils, hydraulic fluids, and gear oils.

NA-SUL® 707 is a low ash rust inhibitor offering good high temperature stability in lubricating oils and greases. It is extremely effective in retarding bleeding of greases, especially in lithium soap greases, and gives excellent grease penetration stability.

NA-LUBE® AW-6110 is an ashless rust and corrosion inhibitor and antiwear additive.

K-CORR® 100 is an ashless rust inhibitor for industrial and automotive lubricants and greases.

K-CORR® G-1340 is a proprietary zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate.

RECALOFLOSSO® PT-06 is a medium to high-viscosity K-type PFPE base oil with a sharp molecular weight distribution. It can be used as a Perflouropolyether Base Oil for lubricants and greases.