Products in Agrochemicals: Defoamer

DENSIPOL® RMB is a cost-effective antifoaming agent specifically designed for controlling foam generation in waterborne technical products. This antifoaming agent is based on a non-ionic dimethylpolysiloxane emulsion, which offers reliable foam control properties. It is effective across a wide range of pH levels and salinity, ensuring consistent performance in various environments. Additionally, DENSIPOL® RMB is heat-resistant, capable of withstanding temperatures up to 70°C. With its superior qualities, this antifoaming agent provides effective foam control, enhancing the quality and performance of waterborne technical products.

AMSil™ 80 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 35 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

TRAMFLOC® 1147 is a highly efficient 33% active silicone antifoam, which is active over a wide range of pH. The product is best suited for industrial applications where foaming occurs at high temperatures and in highly alkaline systems and for controlling chemically induced foam, particularly that generated by surfactants.. It is not intended for direct food addition. Product is effective in CIP solutions and is stable in autoclaving.

AMSil™ 66 FGK is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™-F H22 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 358 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 80 FGK is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

DENSIPOL® PW 2 is a cost-effective solid antifoaming agent designed to control foam generation. This antifoaming agent is formulated based on a combination of polyoils-polyethers and amorphous silica. With its easy homogenization in solid products, DENSIPOL® PW 2 can be conveniently incorporated into formulations. It offers excellent control over foam generation, ensuring optimal performance in various applications. This antifoaming agent is an ideal choice for industries that require effective foam control, providing reliable results and enhancing the quality of products.

TRANS-290DX is a agricultural in water-based variety with viscosities from ready to use to super-concentrated.

AMSil™ 70 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 708 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 665 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMS-SUPREME is a unique micro-homogenized, easy-to-use condi-tioning blend of Ammonium sulfate, defoaming agents and deposition aid polymers for use with translocating herbicides.

AccuQuest WM is a deposition agent and liquid ammonium sulfate replacement (AMS). It is a unique blend of polymers, water conditioners and de-foaming agents that work together in a water-based solution of ammoniacal nitrogen to enhance the deposition and performance of herbicides.

AMS-All is an easy to use conditioning blend of Ammonium sulfate, defoaming agent, drift-reduction solution and surfactant for use with pesticides negatively affected by hard water.

Foam Fighter® is a high quality, anti-foaming agent. Miller’s Foam Fighter reduces foam in agricultural chemical sprayers and also in dip tanks. It is FDA approved for use in food processing operations. This product is designed to reduce foam in agricultural chemical sprayers and also in dip tanks, such as those used in the grading of peaches and apples. It contains 10% active ingredients and is kosher approved.

Farmworks® Defoamer Antifoaming Agent may be used with any tank mix and any active ingredient for the control of unwanted foam. Use Farmworks® Defoamer Antifoaming Agent with any tank mix that requires a defoamer to knock down foam quickly. Farmworks® Defoamer Antifoaming Agent also severely reduces foam reformation during mixing and spraying, making application more efficient by eliminating the need for stopping to add more defoamer. NOT FOR AQUATIC USE IN WASHINGTON STATE.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Haf-Pynt is a low use-rate, non-ionic spray adjuvant, containing an anti-foam, designed for quick wetting, uniform distribution and increased spray retention.

Foam Out-it gets the Foam Out.

Primary is a superior blend of special emulsifier-surfactants and highly refined paraffinic spray oil that is designed for use with a broad range of pesticides where an oil concentrate adjuvant is recommended.

Hi-Yield® Herbicide Enhancer contains AMS / Defoamer / Drift Reduction Solution / Surfactant where AMS - Ammonium Sulfate to condition “hard water”. Increases effectiveness of the herbicide in high Calcium water and high pH water, Defoamer - Additive to reduce foaming during mixing, agitation and spraying, Drift Reduction Solution - Additive to help reduce the chemical and physical drift of the herbicide both during and after application, Surfactant - Additive to allow better adhesion and absorption of the herbicide into the waxy leaf of the weed.

Kalo Anti-Foam is a fast, effective defoamer for use in suppressing foam. Controlling foam reduces filling time and lessens overflow waste. Anti-Foam improves spray performance. The combination of effective ingredients allows for very fast knockdown of troublesome foam if it should occur in the spray tank.

FoamBuster is a blend of foam-prevention agents that prevents or controls foam problems in a spray tank.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Silchem SAF110 is a water dispersible, 10 % active silicone emulsion that is useful to control foaming in many aqueous systems.

Kalo One-Ap XL is a water soluble blend of ammonium sulfate, nonionic surfactant, deposition aid and antifoam agent. One-Ap XL is formulated to improve the efficacy of glyphosatebased pesticides and other post emergence pesticides that recommend ammonium sulfate or nitrogen solution and nonionic surfactant. One-Ap XL contains non-ionic surfactant, to help increase the biological efficacy of pesticides. Ammonium sulfate helps to reduce tank mix antagonism. The anti foam agent in One-Ap XL reduces the formation of troublesome foam. One-Ap XL is micronized to aid in solubility and speed of tank mixing.

standoutStandout delivers protected, consistent enzymes into the soil to help maximize your fertility program. The stabilized enzymes in Standout activate biological processes in the soil that optimize the soil microbial community. This can result in increased availability for higher quality and yields.

Interactive is a combination of translocating surfactants, wetting agents and ammonium salts designed to enhance the efficacy of herbicides. Interactive also contains sequestrants and de-foaming agents to improve spray application.

Farm General® Defoamer Antifoaming Agent may be used with any tank mix and any active ingredient for the control of unwanted foam. Use Farm General® Defoamer Antifoaming Agent with any tank mix that requires a defoamer to knock down foam quickly. Farm General® Defoamer Antifoaming Agent also severely reduces foam reformation during mixing and spraying, making application more efficient by eliminating the need for stopping to add more defoamer. NOT FOR AQUATIC USE IN WASHINGTON STATE.

Amsol®/Dry contains refined spray grade ammonium sulfate that is milled and blended with a proportionate amount of dry antifoam and used as a tank mix additive.

Silchem SAF130 is a water dispersible, 30% active silicone emulsion that is useful to control foaming in many aqueous systems.

Holzit is an easy to use formulation of ammonium salts and specialty polymers for use with pesticides negatively affected by hard water.

Silchem SAF105 is a water dispersible, 5 % active silicone emulsion that is useful to control foaming in many aqueous systems.