Products in Other Printing Applications: Polyurethanes (PU)

SYNTHOLUX 197 PE is an aadiation-curing, low-viscosity polyester acrylate resin that is solvent-free. It is used in UV- and electron beam-curing primers and top coats for wood, paper, plastics, and printing inks. It has applications in construction adhesives, industrial adhesives and sealants, wood coatings, and finishes.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

TINOX Color Red 20 is a high performance pigment with Barium free, semitransparent yellower shade red with good rheological properties for solvent & aqueous inks, good soap & detergent resistance.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Incozol LV is a reactive diluent designed to help producers of polyurethane coatings attain low VOC systems. It is used in the formulation of two component coatings for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, anti-graffiti lacquers and waterproof coatings.

XYSIL® R120H is a fumed silica after treated with PDMS(Polydimethylsiloxane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

Silok® 4084 is Silicon-free defoamer, good defoaming and foam suppression, promote leveling, good compatibility with resin, and can be recoated.

Aromatic-aliphatic hardener with good yellowing resistance. Suitable for polishable varnishes and enamels give to the final coating excellent hardness and good elasticity.

SpaceRite S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.

POLYTONETM K-97 HH is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

A bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in one component PU systems, where it is normally used with aliphatic prepolymers.

Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings. Used in conjunction with low NCO polyurethane prepolymers, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford cross-linking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios.

POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

POLYTONETM K-96 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

XYSIL® R120B is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

Silok® 7190W is a water-based paint dispersant, with good compatibility with water-based resin, high gloss. Amino and two-component polyurethane are common. Suitable for dispersion of materials including carbon black, titanium white, iron oxide, extinction powder, etc. It can improve the covering power of paint ink.

Imagifine Blue 612 are high strength, pourable pigment dispersions, specifically formulated for in-plant tinting of emulsion and water-based or aqueous paints & aqueous inks. IMAGIFINE pigment pastes are cost economic alternatives to commonly used, high concentration aqueous dispersions containing high quality pigments in respect to light fastness, temperature and chemical resistance. IMAGIFINE pigment pastes use a minimal of additives to ensure that these dispersions interfere as little as possible with the chemistry of customer products. IMAGIFINE pigment pastes are standardized with respect to color strength on a weight basis. Pigment loading may vary from color to color.

POLYTONETM K-95 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

Microblanc 3 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 3 is the re enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Silok® 8066-Strong Anti-Shrinkage Wetting &Leveling Agent is a typical dynamic with extremely low surface tension silicone wetting leveling agent. Especially suitable for PVC substrate water-based PU coating, excellent anti-plasticizer, anti-shrinkage and offer mirror leveling effect.

NKX-125 is a Very soft aromatic rubberized resin with adhesive properties developed to be employed as an initial and final high strength adhesive and aqualor, having high yield. It can be used in the footwear industry in polyurethane collage, PVC, rubber (neoprene), EVA, synthetic leather, injected soles, foam, among others.

Etna Tec Limited TEC 3065 is a multifunctional acrylate based reactive diluent. It contains Etna-TEC’s (E-TEC) patented cure technology, which allows it to be thermally cured in the presence of oxygen. TEC 3065 is a low viscosity, 100% NVM liquid, and thus, contains no Volatile Organic Compounds (VOC).

These resins are highly effective in imparting gloss, adhesiveness, leveling and also in increasing the solid content leading to a reduction in the VOC. The hydroxyl polarity leads to better adhesion and wetting of pigments and surfaces.

Silok® 771N is a typical oily wetting and dispersing additive for precipitating matting powders and gas phase matting powders. It has excellent dye compatibility and great viscosity reduction.

CARBODILITE™ SW-12G is a Low-toxic, multifunctional carbodiimide based micro micelle solution type crosslinking agent which helps improve various attributes such as Water, solvent, chemical resistance, Hardness, abrasion, scratch resistance, Adhesiveness. It reacts with carboxyl group even in room temperature, within short period of time, dosage low as 3~7wt%. Recommended curing condition：Over 20℃ (68°F).

Antioxidants - Others

POLYTONETM K-97 HH is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability. POLYTONE K-97

Luxcor 200 has excellent pigmenting power and can be used in plastics, inks and paint. Due to its superior solvent resistance, it can be used to manufacture vinyl and polyurethane based inks and paints without causing storage problems. It is also indicated for use in flexible PVC and plastisol due to its resistance to bleeding.

PAT-ADD LE 1020 is a leveling and substrate wetting agent for use in solvent-borne coatings.PAT-ADD LE 1020 is very suitable for use in clear coatings.PAT-ADD LE 1020 enhances flow and leveling and provides gloss optimization.

Exelfast Blue ED 909 EMR Blue 15:3 is a modified product. It is mainly Used in Printing Inks, Paste Inks (Sheetted, Coldset).

Nigtas 75 has its applications in Water based Interior / Exterior Paints, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Road Marking Paints, Marine Paints, Epoxy Paints, Printing Inks.

TAFIGEL PUR 41 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 41 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 41 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

Radiation-curing, low-viscosity polyester acrylate resin, solvent-free.

Silok® 4075 is a silicone free defoamer, with good defoaming and foam suppression ability, and no influence of recoating.