Products in Primers & Lacquers: Waterborne Ink

Joncryl® HSL 9010 is a liquid product with end uses in waterborne ink and lacquers. Recognized for its high performance, it finds applications in the markets of paints and coatings, printing, and packaging. With its liquid physical form, it serves as a coating for primers and lacquers.

Joncryl® HSL 9012, a high-performance member of the Acrylics & Acrylates chemical family, takes the spotlight within CASE Ingredients. Specifically categorized under Resins & Binders in the realm of Other Resins & Binders, this liquid formulation is designed for a range of applications. With a particular focus on printing and packaging, Joncryl® HSL 9012 proves ideal for packaging coatings, primers, and lacquers. In its liquid form, this product ensures ease of use and efficiency in diverse formulations. Trust in the reliability and high performance of Joncryl® HSL 9012 to elevate the quality of your packaging coatings and lacquers.

SYNPRINT AC 9113 is based on self-crosslinking technology substantially increasing the chemical resistance as well as adhesion. This technology was designed for the self-crosslinking mechanism to fully cure at room temperature while maintaining long-term shelf stability. SYNPRINT AC 9113 provides excellent adhesion to multiple substrates including films and foils and is an excellent let down binder for water-based printing inks. It has a very low particle size with good penetration into porous substrates like paper and board. It exhibits the following features and benefits: Film has very high gloss, flexibility with good printability Excellent adhesion to multiple substrates Zero VOC requirements to formulate coating

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

SYNPRINT AC 4110 is a water-based, cationic acrylic copolymer solution. SYNPRINT AC 4110 is recommended for primers with excellent adhesion on critical substrates such as metallised foil. Moreover, films formulated with SYNPRINT AC 4110 form a receptive layer for water-based anionic inks. The low minimum film-forming temperature allows the formulation of low-VOC formulations. Features and Benefits: Excellent adhesion to a wide variety of substrates Excellent bonding of anionic inks Low MFFT Excellent, universal stain-blocking properties Free of APEO and co-solvents

SYNTRAN® WA 1001 is a hard and high melting polyethylene wax emulsion. This wax emulsion is specially designed for OPV, ink and coating applications. It can improve the friction resistance and anti-blocking properties of the surface. SYNTRAN® WA 1001 can be combined with various water-based polymer dispersions. Features and Benefits: Excellent abrasion resistance Excellent anti-blocking properties Very good compatibility with waterborne base polymers Very good water resistance Hard and high melting polyethylene wax emulsion. Abrasion and scratch resistance, anti-blocking. It can improve the friction resistance and anti-blocking properties of the surface

FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.

SYNPRINT AC 4120 is a water-based, cationic acrylic copolymer solution. SYNPRINT AC 4120 is recommended for primers with excellent adhesion on paper/paperboards and labels. Moreover, films formulated with SYNPRINT AC 4120 work as a receptive layer for water-based anionic inks. Features and Benefits: Excellent adhesion to a wide variety of substrates Excellent bonding of anionic inks Free of APEO and co-solvents

CeraSPERSE 321BG is a compound of waxes and PTFE in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides improved compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

SYNTRAN® DR 7060 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based coatings. Depending on the application and the objective, SYNTRAN® DR 7060 is typically used in concentrations between 1% and 10%. Features and Benefits: Polymeric surfactant technology designed to provide excellent wetting and incorporation of pigments or additives into water-based coatings. High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

SYNTRAN® DR 7061 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. Used as a grinding resin in pigment dispersions, it improves color development of organic pigments and carbon black. Depending on the application and the objective, SYNTRAN® DR 7061 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent wetting and dispersibility of additives High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

SYNTRAN® DR 7101 is a water-based alkali-solubilised styrene-acrylic copolymer based on our polymeric surfactant technology. This polymer was designed to improve dispersibility and color development of water- based pigment concentrates and coatings and can be used for both inorganic and organic pigment dispersions. Used as a grinding resin, it shows excellent rheology control and storage stability with multiple pigment types. Depending on the application and the objective, SYNTRAN® DR 7101 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent pigment dispersing ability High compatibility and stability with multiple formulation types and pigments APEO-free Low odor Compliant with Swiss Ordinance

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

SYNTRAN® WA 1005 is a multi-purpose synthetic wax emulsion. It is an ethylene copolymer emulsion of a hard and high melting polyethylene wax specifically designed for use in surface coating applications of different kinds. SYNTRAN® WA 1005 has excellent compatibility and is therefore very well suited for clear wood coatings to improve slip, scratch, abrasion and blocking resistance. Features and Benefits: Very good compatibility with waterborne polymers Excellent abrasion resistance High slip and anti-blocking Very good water resistance. Hard and high melting polyethylene wax emulsion.

Nitrocellulose DLX 8/13 is a diced wood pulp-based film forming resin by Nobel NC. It is extremely soluble in alcohol. Used in flexographic and gravure inks, wood coating (film coatings, buffing finishes, brush coatings, primers and spray lacquer). Also used in metal coating (coatings for foil), paper coating (coatings for calendars and film coatings) and leather coating (aqueous emulsions). Nitrocellulose DLX 8/13 has low content of nitrogen.

Silok® 8241 is a base material wetting agent with both defoaming and antifoaming properties. It has low surface tension, promotes leveling, and can wet all metal, plastic and other low surface energy material surfaces

Deuteron VT 930 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 930 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Multihue Pigment Green BG/GSN/GN is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

LUBA-print® 499 is a wax dispersion / wachsdispersion product. This product have applications in aqueous lacquer systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Multihue Pigment Violet RC is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Multihue Pigment Red FG is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Beijing Panxin Titanium CR501 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Nitrocellulose DHX 8/13 is a dice wood pulp-based film forming resin by Nobel NC. Possesses high content of nitrogen. Used in flexographic and gravure inks, wood coating (buffing finishes, brush coatings, film coatings, primers and spray lacquer), paper coating (calendars), automotive metal coating and aqueous emulsions for leather coating. Nitrocellulose DHX 8/13 shows superior compatibility with a wide range of resins and higher tolerance for aromatic diluents.

LUCRAMUL® AP is a phosphonic acid ester based polymeric dispersing agent for inorganic pigments, including titanium dioxide.

Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160 °C.The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability.In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting.Application Deuteron SO 300 is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. back

Multihue Pigment Violet BL is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Fibrillated cellulose in water suspension. Valida S191C, 3% is derived from wood pulp that has been sourced from sustainable managed forests. The product is a multifunctional bio-based additive which can be widely used in waterborne coatings, Inks, adhesives to provide unique rheological and physical properties.

Deuteron VT 920 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 920 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron VT 910 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 910 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

Beijing Panxin Titanium CR210 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

Multihue Pigment Yellow G is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Multihue Pigment Green FGNX is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.