Products in Packaging Coatings: Waterborne Coating

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Syntran® DR 7055 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks, pigment concentrates, and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Dar-Tech Hauthane HD-4669 is a hard, co-solvent-free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It may be thickened with associative thickeners for alternative application methods.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

LO-VEL® 8300 flatting agent is a synthetic amorphous precipitated silica treated with a functionalized wax. It is designed for use in waterborne and solvent-borne coatings, and is suitable for coatings with a dry film thickness of less than 1 mil (< 20 microns).

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Dar-Tech Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever a high level of gloss and clarity is required.

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Syntran® DR 7015 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

DeMUL 229 is a nonionic emulsifier, improving shear, temperature and electrolyte stability of polymer dispersions. DeMUL 229 can also be used during the premixing phase in the production of waterborne emulsion paints, acting as a process aid and reducing grind time by faster deagglomeration of TiO2 and fillers.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.

DeCAL 4030 is a low-cost universal thermoplastic Styrene/Acrylic copolymer in emulsion form that offers excellent binding power, adhesion, and gloss. DeCAL 4030 is used in a wide range of applications, including interior and exterior water-based paints, lacquers, adhesives, and flexible fillers.

Hauthane HD-2107 DMM (L-2877) is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. Features: Forms tough, abrasion- and mar-resistance films. Outstanding water and chemical resistance. Excellent exterior weathering performance. Can be crosslinked to enhance performance. Dilution and clean-up with ordinary tap water. Contains dipropylene glycol dimethyl ether (DMM) co-solvent.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Texicryl® S-02 is a low-molecular-weight, alkali-soluble styrene acrylic resin developed for water-based coatings and inks. The resin is supplied in solid form and is designed to impart gloss and resolubility to water-based coatings within the graphic arts. It is readily let down at elevated temperatures in water in the presence of ammonia or other suitable amines.

Texicryl® S-12 is a styrene acrylic resin soluble in alkalis, developed for water-based coatings and inks. It comes in solid form and enhances the gloss and resolubility of water-based coatings for the graphic arts industry. Optimum pigment grinding is achieved by making resin solutions at 30 - 35% solids content, while clear coatings require maximum solids for the highest achievable film build.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Texicryl® S-09 is an alkali-soluble styrene acrylic resin developed for water-based coatings and inks. The resin is supplied in solid form and is designed to impart gloss and resolubility to water-based coatings in the graphic arts market. It is easily dissolved in water at elevated temperatures in the presence of ammonia or other suitable amines. Solutions of the resin must be kept above pH 7 to prevent the resin from reverting back to its solid form.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Hauthane HD-2117 DMM (L-2892) is an extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. Features: Contains dipropylene glycol dimethyl ether (DMM) co-solvent. Outstanding water and chemical resistance. Fast early water resistance development. Can be erosslinked o enhance performance.

Hauthane HD-2602 DMM (L-2857) is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. Features: May be formulated into low surface tension coatings. Excellent abrasion resistance. Non-fugitive silicone component. Crosslinkable for improved adhesion and performance. Contains dipropylene glycol dimethyl ether co-solvent.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.

ASCOTRAN® H14 is a multi-metal substrate renowned for its high water-resistance properties.

McNAMEE® Clay is a low cost air-floated kaolin reinforcer and inert filler. It is also used in crack fillers, caulking compounds, and elastomers.

Afcona - 5071 is an anionic wetting and dispersing additive developed to prevent settling and flooding of pigments.

BILT-PLATES® 156 Filler is a fine particle size (4 Hegman fineness) air-floated kaolin clay. It is used as a reinforcing filler in all types of coatings, adhesives, elastomers and latexes. It can be used as a TiO2 spacer in coatings that do not require a high brightness filler.

Additive EP024 73 Wa/BG is an epoxy phosphate additive for waterborne stoving enamels. With this resin it is possible to improve adhesion and resistance to corrosion, chemicals and stains.Features & BenefitsFor waterborne stoving enamelsImprove adhesionImprove resistance to corrosion

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC COBALT BLUE C1-BO are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC GREEN B5-G are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.