Products in Packaging Coatings: 2K (2 component) Coating

AFCONA 2045 is a silicone-based defoamer used to prevent the formation of foam and blisters during manufacturing and application of solvent-based coatings, including polyurethane clear coats. It is effective even in difficult situations such as airless spray, brush, and roller application, and has strong defoaming properties with a very good transparent appearance.

AFCONA 2290 provides anti-foam and de-aeration properties for solvent-containing and solvent-free systems of epoxy, polyurethane, UPE and UV coatings. AFCONA 2290 contains a non-silicone defoaming substance which offers very good performance in both defoaming and anti-foaming. Due to its strong defoaming properties and silicone-free composition, it is also very suitable for primer coatings.

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 4047 is a high molecular weight polymeric dispersant for the deflocculation of all types of pigments. AFCONA 4047 is a highly effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance provides very good stability performance with all type of pigments.

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

AFCONA 2048 is a defoamer for both spray and brush applications of solvent-based wood coatings. It is especially suited for high gloss solvent-based wood finishes and is highly compatible, not causing unacceptable haze. It is particularly useful for brush applications, as it quickly evaporates and provides rapid defoaming.

Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Afcona - 5251 is a non-ionic dispersant formulated for the deflocculation of transparent iron oxides.

Afcona - 2050 is a strong defoamer suitable for most solvent-based coatings.

Afcona - 3779 is a leveling agent specifically designed for solvent-based coatings.

Afcona - 5285 is a wetting and dispersing additive tailored for solvent-based paints.

Afcona - 5220 is an anionic wetting and dispersing additive specifically designed for inorganic pigments, primarily for TiO2 and extenders.

Afcona - 4201 is a high molecular weight polymeric dispersant used for the deflocculation of all types of pigments.

Afcona - 3700 is a wetting, leveling, and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties.

Afcona - 4063 is a high molecular weight polymeric dispersant aimed at deflocculating all types of pigments.

Afcona - 3236 is an additive designed as a slip and leveling agent that also offers good defoaming performance.

ASCOTRAN® H14 is a multi-metal substrate renowned for its high water-resistance properties.

Afcona - 4720 is a 100% active, solvent-free dispersing agent based on an AB blocked polymer and a group of anchoring agents. Its advanced 3-block high molecular weight structure allows the development of pigment dispersions that exhibit better compatibility in broad applications.

Afcona - 2723 serves as a defoamer and air-releaser for unsaturated polyester, polyurethane, UV, and epoxy resin systems.

ECOTINT® HC YELLOW A1-Y colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW B1-Y colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC COBALT BLUE C1-BO are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC SCARLET A2-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC RED A3-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLACK B7-SO are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLUE B4-B are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC MAGENTA A4-P colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BIVA YELLOW C2-YO colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC WHITE B6-WO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC ORANGE A2-O colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE RED B3-RO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC GREEN B5-G are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.