Products in Packaging Coatings: Weather Resistance

Zhejiang Genky Selong Technology Trans-oxide yellow TY-608-3 is a transparent iron oxide pigment yellow can be used in automotive coatings, wood coatings, architectural coatings, industrial coatings, powder coatings, art paint, plastics, nylon, rubber, printing ink, cosmetics, tobacco packaging and other packaging coatings.

Acrylic resin cross-linking with polyisocyanate

Köstrosol® 1540 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 1540 is a pure colloidal silica without any organic additives.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Hunan Three-Ring Pigments Iron oxide red H120 color is soft, and the color is excessive from the orange red to the purple red series. Tricyclic pigments have excellent pigment and chemical properties, high coloring power and hiding power, excellent light and weather resistance, and high temperature resistance. Insoluble in alkali, stable in a certain range of acidity, completely soluble in concentrated hydrochloric acid. It is insoluble in water and organic solvents and has excellent properties such as rust and UV resistance.

Acrylic resin cross-linking with polyisocyanate

Glyplast 206/7 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Disvipol 271 is used in spar varnishes, marine enamels, chemical & weather resistant finishes. Tung oil adducts for offset printing, and wire enamels.

BRIOMICA® 262 is a dry-ground ultra-white small mica flakes.

SANCRYL 847 60 X is a hydroxylated acrylic resin for two component coatings.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Acrylic resin cross-linking with melamine resin

Talc MP 25-38 is a fine-particle talc with high brightness, low surface area and oil absorption, and excellent Hegman fineness. It is used in a number of applications including: industrial and architectural coatings and primers; adhesives and sealants; and caulks and putties. It is low in abrasion, chemically inert and has a platy crystal shape that improves weatherability and reinforcement.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

CathayCoat YS-22B iron oxides are a range of high-quality pigments with attractive prices for paints, plastics, paper and dispersions. Extra milling or dispersant additives can be added to customize and improve the final product.

Marcoa™ CL331 has corrosion resistance and is used in appliance primer, aluminum coil coating and interior architecture.

CathayCoat RS-11 iron oxides are a range of high-quality pigments with attractive prices for paints, plastics, paper and dispersions. Extra milling or dispersant additives can be added to customize and improve the final product.

Marcoa™ CB226 has high solid content and gloss. It is used in appliance finishing, aluminum coil coating, exterior architecture and can white coating.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Marcoa™ CL250 has hardness and stain resistance. It is used in appliance primer, appliance finishing, aluminum coil coating, interior architecture, can white coating and deep drawing can white coating.

PRETIOX RGZW is a micronized rutile titanium dioxide with an organic and special inorganic surface treatment with aluminum and zirconium compounds, with aluminum ion modification in the crystal structure.

Serkyd FA42X60 is a special fatty acid based, short oil alkyd resin is used in anti-corrosive primer and top coats.

SILMIKRON® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Benda-Lutz GOLDBRONZE G2021 is a non-leafing aluminum pigments distribute themselves evenly throughout the paint film and thus reflect incident light at multiple locations. For this reason, these pigments are highly suitable for tinted paints such as colored metallic automotive paints or tinted hammer-effect enamels. Non-leafing pigments are also preferred for applications requiring excellent adhesion, such as primers.

CathayCoat RS-13 iron oxides are a range of high-quality pigments with attractive prices for paints, plastics, paper and dispersions. Extra milling or dispersant additives can be added to customize and improve the final product.

Marcoa™ CL150 has pigment dispersibility and it is used in appliance primer and can white coating.

The euroMinerals incomp special are multi-functional extenders based on talc and dolomite, ground to different fineness and talc content.

Onto™ EP1132 is a range of functional surface treatments that can be used to promote adhesion of two-part polyurethane and epoxy coatings to difficult-tobond substrates such as engineering polymers, high performance (speciality) plastics and thermoplastic composites. The treatment can be applied to a substrate from solution using a range of coating methods to form a functional layer of material that is strongly bonded to the substrate surface. The new surface functionality is chemically compatible for bonding to polyurethane and epoxy coatings and the treatment has been shown to prevent delamination even under severe weathering conditions.

CathayCoat YS-21 iron oxides are a range of high-quality pigments with attractive prices for paints, plastics, paper and dispersions. Extra milling or dispersant additives can be added to customize and improve the final product.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 861 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Biolar ATU 70ws80 is a solution of the fatty alkyd base in the dearomatized white spirit, modified by fatty acids of tall oil.

Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8614 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8614 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8614 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back