Products in Other Printing & Packaging Applications: Polyethylenes

TRECORA POLYETHYLENE WAX – CWP400 is a High Density Polyethylene Wax intended for use in specifically Hot melt adhesives intended for the packaging industry where heat stability and heat resistance are required.

Flex Series™ MD15T High Adhesion has a medium density feature, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD15 High Adhesion is a double-sided poly foam with standard thickness.

NGL020FS is a Butene Co-monomer based Liner Low Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers narrow molecular weight distribution copolymer with slip & anti-block additive which has been specifically designed for the production of high strength blown film of various thickness for multilayer & heavy duty bags.

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

Alkatane GM4755F is a high molecular weight High Density Polyethylene grade with high toughness and stiffness.

71602W is a LLDPE film grade produced by the Spherilene Technology 71602W is without slip additives and antiblock & can be used in General Purpose Packaging Film Application The precise morphological control achieved during polymerization confers good processability & mechanical strengths

kazanorgsintez mLLDPE F2030M is Metallocene Linear Low Density Polyethylene grade used for various applications.

LL525 is a hexene copolymer linear low density polyethylene, designed for high quality cast film applications. LL525 is formulated with stabilization additives, but contains no other additives

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Hanwha Solutions LDPE 950 is manufactured by autoclave process and designed for variety of extrusion coating application such as aseptic paper can, flexible packaging, paper coating etc. LDPE 950 is well known for its good draw-down characteristics and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Micronized Polyethylene wax

kazanorgsintez HDPE PE2NT22–12 is High Density Polyethylene grade used for various applications.

NGL015FG is a Butene Co-monomer based Liner Low Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers narrow molecular weight distribution copolymer without slip & antiblock additive which has been specifically designed for the production of high strength blown film of various thickness for multilayer , air bubble film & lamination film application.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Flex Series™ MD20T High Adhesion has a medium density feature, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD20T High Adhesion is a double-sided poly foam with standard thickness.

Alkathene LDD204 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) applications in which a medium slip film is required. Alkathene LDD204 is formulated with a process stabilization and antiblock additive package and contains additives to confer a medium level of slip

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

HFG00346 High Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution copolymer which has been specifically designed for the production of high strength blown film of various thicknesses even down to below 10 micron. It can be easily processed on normal HDPE blown film lines, using melt temperatures between 200 and 220°C.

multithene 1050 is High-density polyethylene compound.

Alkathene LD0220MS is a low density polyethylene designed for use in the production of low gage (20 - 50μm) high quality film. Alkathene LD0220MS is formulated with a process stabilization and antiblock additive package and contains an additive (erucamide) designed to provide a medium level of slip.

Micronized polypropylene wax

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

Marcus Oil and Chemical M500 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Alkathene LDD205 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) applications in which a high slip film is required. Alkathene LDD205 is formulated with a process stabilization and antiblock additive package and contains additives designed to confer a high level of slip.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

71501S is a LLDPE blown film grade produced by the Spherilene Technology This grade can be used in General Purpose Packaging Film Applications 71501S is additivated with slip and antiblocking additives for excellent openability and slip properties

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

multithene 1070 is High-density polyethylene compound.

Flex Series™ ML20 Ultra High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML20 Ultra High Adhesion is a double-sided poly foam with standard thickness.

kazanorgsintez mLLDPE F2010M is Metallocene Linear Low Density Polyethylene grade used for various applications.