Products in Other Paints & Coatings Applications: Radiation Curable ...

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Domopol 105 UV is an acrylic modified polyester resin developed for UV and electron-beam curing paints, lacquers and printing inks. This resin is also suitable for UV 3D printing materials.Features & BenefitsUV curableExcellent adhesion on wood, paper and various plasticsFor 3D printing material

Domopol 106 UV is an acrylic modified polyester resin designed for UV 3D printing materials. This resin can also be used for UV and electron-beam curing paints and lacquers.Features & BenefitsUV curableExcellent adhesion on wood, paper and various plasticsFor 3D printing materialLow viscosity for easy handling

PEL-SIL™ CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. The EO component gives PEL-SIL™ CL330 coatings additive its compatibility with water-borne systems. PEL-SIL™ CL330 has excellent wetting and recoatability. It can be used at low dosage levels. PEL-SIL™ CL330 can be recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL™ CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes.

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

EBECRYL® 6617 is an aromatic urethane diacrylate oligomer diluted in methyl methacrylate (ratio 75/25), characterized by its adhesion to various surfaces and good flexibility. It is used in radiation-curable coatings and finds application in chemical manufacturing and other specialty coatings. The cured products based on EBECRYL® 6617 offer features such as faster cycle time, improved flexibility, long pot life, low energy consumption, low-temperature curing, matting, and multi-substrate adhesion.

Silsurf®B608 is a silicone glycol copolymer. It is self-emulsifying in water and is designed to be emulsifier or wetting agent in various personal care and industrial chemical formulations. Silsurf®B608 has an INCI name of PEG-8 Dimethicone.

Bomar™ BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200oC for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and Polystyrene. This material has low skin sensitivity for dental and cosmetic applications.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

EBECRYL® 117 is a hydroxyl-functional monoacrylate monomer, is recognized for its low odor, excellent adhesion, and heightened reactivity. Primarily employed in UV/EB cured coatings and adhesives, it effectively reduces viscosity and enhances flexibility. With applications in flexography ink, radiation-curable coatings, and inkjet ink, as well as roles in resin manufacturing and other specialty coatings, EBECRYL® 117 stands as a versatile solution in diverse industries.

PEL-SIL™ CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solvent borne UV/EB coatings and inks. PEL-SIL™ CL400 is also a flow and leveling agent and defoamer. It may also be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems.

S-400 HQ is a micronized ethylene-bis-stearamide (EBS) wax powder. Shamrock’s S-products are micronized waxes that provide rub and abrasion resistance. Included in this line are products that provide controlled slip, gloss reduction, matting, and clarity in a range of particle sizes.

PEL-SIL™ CW300 a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic surfactants and nonionic surfactants. Even at concentrations as low as 0.1 percent, PEL-SIL™ CW300 wetting additive will reduce surface tension below 22 dynes/cm. Therefore, it produces very rapid wetting and spreading on hard-to-wet surfaces. It shows an excellent and consistent performance over a wide range of substrates in various coating formulations. Its applications are found in plastic coatings, wood coatings, radiation curing coatings, automotive coatings, and printing inks, etc. PEL-SIL™ CW300 can also be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. It allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. PEL-SIL™ CW300 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a durable, semi-gloss finish when used either alone or with silica.Application It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX TF also leads to excellent results in powder coatings. back

Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties.Application Radically curing UV coatings and printing inks, in particular for solvent-free systems. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

Silok® 350-Rapid Silicone Leveling Agent is general silicone quick leveling agent with low surface tension and good wetting ability, permeability, which is especially suitable for film UV coating, silk-printed varnish, and water-based coating.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

Spectra Group Limited H-Nu 535 initiates both free-radical and cationic photopolymerization, using a different set of co-initiators depending on the polymerization process • Type II photinitiator: H-Nu 535 acts as a light harvester, followed by energy or electron transfer to a co-initiator molecule; produced reactive species activate photopolymerization • Commercial photoinitiator, non-toxic (LD50>2500 mg/kg).

Solvent-free colorants designed for use in powder coatings and UV and EB cured applications. They are based on a proprietary dispersing vehicle which provides exceptional compatibility, light fastness and heat resistance. Available in a wide range of colors for most tinting and masstone applications, our unique manufacturing process insures that the pigments have been dispersed to an exceptionally fine particle size for optimum color strength and transparency. These dispersions are granulated for ease of handling and incorporation with minimal dusting, remain stable under normal ambient conditions and will not sinter or deteriorate with aging.

Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 8803 improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 8803 does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customized to realize a variety of surface protection and matting objectives.Deuteron OG 8803 is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 8803 can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. back

PL-610 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels. PL-610 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

Cyrachem PS 685 is a silicone antifoam agent. It is water free and contains 100% of actives. PS 685 is specially designed for paints. As it contains silicone active material, it is very cost effective. In addition, it is very effective defoamer in solvent based paints and water based paints. It is recommended for all types of paints.It is effective in destabilizing macro and micro foam, very durable and does not affect the gloss or change the color.

PL-7130 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7130 creates a flexible yet tough polymer with percent elongation near 80%. PL-7130 is non-yellowing and can be used in formulations to add flexibility.

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

PL-7003 is a low viscosity urethane that exhibits very fast cure speeds. Upon curing, PL-7003 exhibits excellent hardness and very low color. PL-7003 can be used in formulations to add strength.

Spectra Group Limited H-Nu 640MP can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

Manalox™ 360 is a solvent-free source of an active aluminum gellant that is perfect for UV cured inks and coatings. However, a more stable, low skinning condition can be achieved by making a 50-75% solution in ink oil solvent prior to use and/or storage. Solutions can be added to the varnish at temperatures of 150°-180°. Manalox produces isopropyl alcohol as a byproduct of the gelling reaction.

Rheologal additive for solvent borne coating systems. SCHWEGO thix 8315 is suitable for thickening of all common solvent containing binder systems with polar groups. It is particularly suitable for high build systems, stoving paints and DIY-paints. The main advantages are: Liquid; easy incorporation; Temperature stable; No influence on gloss; Prevents settling and sagging.

PL-7002 is a tetrafunctional polymethacrylate. This increased functionality results in faster cure speeds due to increased cross-linking capacity. Upon curing, PL-7002 exhibits very high Shore D hardness values. PL-7002 is non-yellowing and can be used in formulations to add strength.

Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness.Application Radically curing 100 % UV-systems (solvent-free). back

x-bond® M 9004 is a methacrylate modified silicon dioxide and zirconia based high solid binder. Exhibits hardness, high abrasion, scratch stability with high chemical resistance (solvents, acids and bases). The coatings can be cross-linked by UV or electron beam curing. Thermal curing is also possible. It is a transparent or translucent inorganic-organic high solid binder. Suitable to formulate spraying, dipping and brushing paints and coatings for coil applications. Recommended for use in varnishes also.