Products in Other Paints & Coatings Applications: Hardener

ILCO PHOS 202 is used as a hardener for acid-curing paint systems as well as a pickling and anchoring agent for the application of paints. In printing inks ILCO PHOS 202 acts as flexibliser. It can be used as adhesion promoter by interacting with polar groups of the substrate to the surface.

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

Huangshan Huahui Technology Triglycidyl Isocyanurate (Powder Coating Grade) HT-708 is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion and high temperature stability..

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

KİSAMİD® 1032 is a cycloaliphatic polyamine as formulating compound for SF coatings, epoxy mortars.

Fast drying hardener for 2K PU system with limited yellowing. Suitable for the formulation of sealers and matt topcoats, it gives hardness to the final coating.

HYDRORENE AW 30 is clear liquid. Compliance with EU and REACH.

Merginamid A 155/2 is a solvent-free modified polyaminoamide-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

Kemfluid 220-L is a fatty amide, used an anti-static and pigment dispersion agent. Hardening agent for paints, lacquers, asphalts, etc. In PVC used for calendering or blown film extrusion. Lubricant for ABS, polystyrene, acrylnitrile styrene, polystyrene and polypropilene pigment dispersion agent.

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

CamCure 2963 acts as a hardener by Champion Advanced Materials (Singhania Group). It is cycloaliphatic amine. It is used in coatings. CamCure 2963 is recommended for use in self-level floorings.

Admark Polycoats AP 1080 is a very fast cure high solids and low viscosity. its used in marine coating, protective coating and industrial coatings.

Admark Polycoats AP 5050 is a low viscosity, high gloss, very good flexibility, hardness and impact resistance comparable to polyamide. No induction time is required. its used in protective coating, industrial coatings and concrete primer.

Eutomer® B-68 is super matting hardner for pure epoxy or epoxy/polyester resins powder coatings.

Admark Polycoats AP 1300 is a fast hardness development, very good flexibility, similar Of AP 1087, lower solid %. its used in marine coating, protective coating and industrial coatings.

KemaPox HF 317 is modified aliphatic polyamine.

KemaPox HF 344 is Modified aliphatic polyamine.

KİSAMİD® 1037 is a formulated polyamine adduct hardener with high chemical resistance, good surface properties, SF coatings, epoxy mortars.

KemaPox HF 349 is Modified aliphatic polyamine.

Merginamid A 210/5 is a solvent-free, modified polyamine-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogeneous coatings with unobjectionable film properties are obtained.

Admark Polycoats AP 5180 is a faster drying as compare with std polyamide with better blush resistance. its used in protective coating and industrial coatings.

epamide 202w acts as water based hardner which is used for coatings and epoxy-cement. It has Good reactivity and high gloss.

KİSAMİD® 1043 is a modified cycloaliphatic polyamine with high chemical resistance, SF coatings, epoxy mortars.

KİSAMİD® 1036 S is a modified, cycloaliphatic polyamine, as KISAMID® 1036 has higher reactivity with good through hardening properties at 5°C.

Merginamid A 154 is a solvent-free modified polyaminoamide-adduct dissolved in water. It emulsifies unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

Admark Polycoats AP 1040 is a low viscosity, surface tolerant. its used in marine coating and protective coating.

Kemfluid 220-G is a fatty amide, used as an anti-static and pigment dispersion agent. Hardening agent for paints, lacquers, asphalts, etc. In PVC used for calendering or blown film extrusion. Lubricant for ABS, polystyrene, acrylnitrile styrene, polystyrene and polypropilene pigment dispersion agent.

Admark Polycoats AP 5140 is a standard high-imidazoline content polyamide. Exhibits very good adhesion, flexibility along with good corrosion protection. its used in protective coating, industrial coatings, concrete primer, adhesive, sealants and putties.

KİSAMİD® 1038 is a modified aliphatic polyamine with excellent resistance against water and chemicals such as inorganic acids. used for SF coatings, mortars, adhesives, laminates, castings.

KemaPox HF 347 is Modified aliphatic polyamine.

Alcure® 4450 is a general purpose, polymeric aromatic isocyanate hardener based on TDI and blocked with E-caprolactam. When properly formulated in coating powders, this product will yield a coating with excellent flow and good overall physical properties. It is designed for interior or primer use.

Merginamid A 160 is a solvent-free modified polyaminoamide-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

Kemfluid 206 is a polyethylene wax, used in extrusion of rigid or soft PVC. Giving rigid shiny surfaces.

Kemfluid 216 is a paraffinic compound, used externallty but has good compatibility with PVC resins. Shiny finishes without exudation. Soft PVC lubricant for cable coverings.

Kemfluid 210 is a paraffinic compound, used in extrusion of PVC, rubber and other primary products. It helps pigment dispersion particularly with rubber.

CamCure 2847 is cycloaliphatic amine by Champion Advanced Materials (Singhania Group). It acts as a hardener. It exhibits good chemical resistance. It is used in coatings. CamCure 2847 is suitable for self-level flooring and lining containers in contact with potable water and non-fatty food. It is food contact approved.