Products in Other Paints & Coatings Applications: Binder & Resin

Diofan® A 610 is a dispersion classified under CASE Ingredients, functioning as a binder and resin. Specifically designed for use in various applications within the Paints and Coatings sector, it excels in Other Paints and Coatings Applications. With its distinctive physical form, Diofan® A 610 offers optimal performance as a versatile and effective ingredient in coating formulations.

Joncryl® U 5168 X serves as an essential component for various end uses, such as primer, base coat, and top coat applications. It exhibits compatibility with a range of substrates and surfaces, including metal, glass, and plastics. One of its noteworthy features is its ability to ensure good pigment wetting. This product functions effectively as a binder and resin in these coating applications.

Diofan® B 204 is a versatile CASE ingredient, functioning as a binder and resin. Specifically designed for use in paints and coatings, it excels in various applications within this sector. Diofan® B 204 contributes to the formulation of high-quality coatings, showcasing its effectiveness as a key component. As part of the CASE ingredient family, it integrates advanced technologies to enhance the overall performance of paints and coatings. With a focus on other applications in the realm of paints and coatings, Diofan® B 204 proves its adaptability and reliability, making it an indispensable choice for formulators seeking optimal results.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

StanChem Polymers SC 5218 is a surfactant stabilized vinyl/acrylic copolymer emulsion for paints and coatings. SC 5218 provides formulators with superior scrub resistance, durability and flexibility.

StanChem Polymers SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties.

StanChem Polymers SC 5186 is general-purpose polyvinyl acetate. It deposits a clear, tough film, which exhibits excellent resistance to heat and light. It provides good adhesion to cellulose. Films of SC 5186 exhibit good blocking resistance.

StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.

StanChem Polymers SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility.

StanChem Polymers SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning.

StanChem Polymers SC 5184 is a vinyl /acrylic copolymer designed for use in interior architectural coatings demanding excellent scrub resistance and reliable pigment dispersions.

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

StanChem Polymers SC 6016 is self-crosslinking acrylic emulsion when the polymer is cured at temperatures of 300 – 350 °F, depending on the time and temperature of cure. Added acid catalyst can increase the rate of cure.

Texicryl® 13-665 is designed for use in a broad range of formulations where low VOC is required. It has been specifically designed MIT free to meet the new regulatory requirements for artist’s color paints. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Crestakyd® 10-4007 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It has been specifically formulated for use in artist's paints and for applications requiring higher flash points.

Clear and pigmented paints for ABS, PVC, PUR, Polystyrene and Paper. Good yellowing, abrasion and shock resistance.

Domemul SA 9263 is a styrene-acrylic APEO-free emulsion designed for industrial waterborne coatings: anticorrosive primers, metal finishes, plastic and wood. This resin is recommended for applications requiring good adhesion to metal, good humidity resistance and high gloss.Features & BenefitsGood adhesion to metalGood humidity resistanceHigh gloss

Domemul SA 9262 is a styrene-acrylic emulsion designed for industrial waterborne coatings: anticorrosive primers, metal finishes, plastic and wood. This resin is recommended for applications requiring good adhesion to metal and good humidity resistance.Features & BenefitsUniversal emulsion for metal paintsGood anticorosion propertiesGood water resistanceGood drying and hardness

Domemul RA 9675 is an acrylic APEO-free latex resin designed for the preparation of industrial aluminum pigmented aqueous basecoats. The pseudoplastic rheology profile of this resin ensures a great metallic appearance.Features & BenefitsEspecially designed for 1k waterborne metallic shades basecoatsStrong pseudoplastic and thixotropic rheology profileImproved metallic pigment orientation

Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack. Rovene 6091 is recommended as a blending component for Rovene 6090 to modify the degree of adhesive release. This fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with easy release. Features: Firm hand High riding Fast drying Low TMLI release values (easy release) Excellent mechanical stability

Rovene 6090 is a functionally modified, water-based vinyl acetate copolymer latex. As a water-based release coating, Rovene 6090 is recommended as a blending component for Rovene 6091 to modify the degree of adhesive release. On its own, this fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with very tight release values. When combined with Rovene 6091, release values can be easily tailored to specific needs. Features: Firm hand High riding Fast drying High TMLI release values (tight release) Excellent mechanical stability

Domopol 5381 65 X is a saturated, branched polyester resin developed for stoving enamels for metal with high hardness.Features and Benefits :Stoving enamelsHigh hardness

Domopol 105 UV is an acrylic modified polyester resin developed for UV and electron-beam curing paints, lacquers and printing inks. This resin is also suitable for UV 3D printing materials.Features & BenefitsUV curableExcellent adhesion on wood, paper and various plasticsFor 3D printing material

Domacryl 943 is a methacrylate resin for hard two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 941.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 941)Hard resin

Domacryl 942 is a methacrylate resin for flexible two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 940.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 940)Flexible resin

Domalkyd 5331 75 BAc is an alkyd resin modified with synthetic fatty acids designed for 2K PU enamels and varnishes. This resin is suitable for 2K car refinishing, ACE machinery, wood and high-grade industrial paints.Features and Benefits :2K PU coatingswood coatingscar refinishing, ACE machinery and industrial paints

Domalkyd 1755 D-60 is an isophthalic alkyd resin modified with soybean oil used in impregnations and preservative finishes for wood and exterior varnishes.Features & BenefitsGood drying propertiesGood pigment wetting capacityBinder in impregnations and preservative finishes

Domopol 5200 75 BAc is a special purpose resin developed to improve adhesion of paints to various substrates. This resin is also suitable for high solids coatings formulations.Features & BenefitsImprove adhesion of paintsAdhesion improvement on aluminum, steel and galvanized steeSuitable for high solids coatings

Domopol 6068 60 X is a hydroxyl-bearing polyester resin designed as a hard co-reactant with isocyanate resins. These combinations are particularly suitable for use in the formulation of air drying automotive and industrial coating. They make hard, tough, but flexible as well as glossy coatings for metal with good outdoor durability and lightfastness.Features & BenefitsAirdrying automotive and industrial coatingGood outdoor durability and lightfastness

Domopol 6044 96 BAc is a saturated polyester resin developed for 2K high solids polyurethane coatings. This resin can also be used as a combination resin for hydroxyl acrylic resins to reduce VOC and/or viscosity in industrial finishes, protective coatings and car refinish.Features & BenefitsHigh solid PU coatingsGood flexibilityExcellent chemical resistance and durability