Products in Industrial Coatings: Polyurethanes (PU)

ADD-4009 is a multi-purpose high molecular weight wetting and dispersing additive for solvent-based coatings. It prevents reflocculation of pigments through steric hindrance and therefore stabilizes the color strength and hue of pigments in paints and pigment concentrates. Due to its particularly good combination of price and performance, ADD-4009 is a very attractive substitute for conventional wetting and dispersing agents.

Marathwada Chemicals Polyurethane Dispersion is aqueous aliphatic polyurethane dispersion designed for coating rigid substrates, such as concrete, wood, plastic, marble, polycarbonate, tiles and metal. It has excellent durability and displays good UV resistance.

Radiation curing, tin-free UV-Dispersion with very excellent mattability and good chemical resistance already after physically drying.

VF 502™ is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

Jiangsu Sanmu 750M has light color, high luster, high cost-efficiency, very low free TDI content, good storage stability, easy extinction, and excellent rubbing property. It can be applied with alcohol acid, acrylic acid resin and other resin together. It applies to higher-grade furniture paint, etc.

UROTUF L63-W-38 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in water. This is the solvent free version of UROTUF L63-MPW-38.

Jiangsu Sanmu 740 has light color, ligh luster, good compatibility, high hardness, good dryness, high scratch resistance, good storage stability and excellent chemical resistance. It can be applied with alcohol acid, acrylic acid and other resin together. It applies to higher-grade matte paint and wood coatings primer, plastic paint, industrial paint, etc.

CLiQFLOW® 675 is a tin-free polyurethane based rheological additive for aqueous clear and pigmented systems. The associative thickener increases mid and high shear viscosity and provides a slightly shear thinning flow behavior to aqueous systems.

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

UROTUF® F78-M-50 & F78-X-50 are one-package, oil modified urethanes ASTM Type I, which cure by oxidation at ambient temperatures in the presence of metallic driers. They may be blended with alkyds to improve dry time and abrasion resistance. They contains no free isocyanate.

PAT-ADD DA 932 is a polymeric dispersing agent for use in industrial solvent-borne paints and pigment concentrates.PAT-ADD DA 932 is specially designed for application in TPA based paints. However, the product is also applicable in other solvent borne systems and high concentrated pigment dispersions as applied for in-plant tinting purposes. Using PAT-ADD DA 932, results in extremely low viscosity and high transparency properties.

UNITHANE HS-1007 is a high solids, solvent free, APEO free waterbased polyurethane dispersion with superior flexibility and recovery properties. UNITHANE HS-1007 is designed for both interior and exterior industrial coating applications requiring flexibility, adhesion and hydrolysis resistance.

High molecular weight, pH-independent polymeric dispersant for deflocculation of pigments in water-based decorative as well as industrial paints

UROTUF® F48-M-50 is a one-package, ASTM Type I oil modified urethane, based on soybean oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

Unithane IC-806 SF is a solvent free, uniquely soft, low VOC, medium gloss, APEO free, waterbased polyurethane dispersion; requiring soft feel, flexibility and automotive grade properties. Unithane IC-806 SF also displays low tack when used as heat seal adhesive. Specifically designed for use in a formulated coating for graphic arts, metal, paint, textiles and selected plastics.

UTHANE® 55A-J014 Black Gloss High Solids 2K is a two component polyurethane with excellent hardness, and mar resistance. The coating can be cured by air dry or forced dry.

Quaker Color Metal Coatings AB-30F is an aliphatic, lightfast water-borne urethane dispersion, designed for high performance areas where flexibility, chemical and abrasion resistance are required. The aliphatic backbone of AB-30F provides excellent UV and hydrolysis resistance. Due to AB-30F’s compatibility, it is a good choice as a flexibility modifying resin for hard acrylics and urethanes.

PAT-ADD DA 947 is a polymeric dispersing agent, dissolved in butyl acetate, for use in industrial solvent-borne paints and pigment concentrates.PAT-ADD DA 947 is specially designed for application in coil coatings and industrial paints systems as well as in high concentrated pigment dispersions. PAT-ADD DA 947 is effective as dispersant for carbon blacks, organic and inorganic pigments.

UROTUF® L512 is a fully reacted, aliphatic, thermoplastic, urethane resin dispersed in a blend of water, n methylpyrrolidone, and amines and is suitable for both air dry and force dry applications. It is similar to UROTUF® L51 in many properties, but gives better chemical and stain resistance when used alone or when blended with acrylic emulsions.

Rokopur Email RK 401 is designed especially for metal top coats. It is suitable for the protection of new and maintenance of old steel structures. We recommend it especially for coatings of bridges and transport structures, as well as in chemical and petrochemical plants, paper mills, pulp mills, cement plants and power plants. It is designed for environments where higher resistance to weathering and abrasion at a lower degree of gloss is preferred. This paint also allows the interlayer to be overcoated with just one coat, which is not possible with conventional high gloss polyurethane topcoats and has long-term overcoatability. Rokopur RK 401 industrial top coat can also be used as a "single-sided" directly on galvanized surfaces or on steel with a lower corrosion load.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

High molecular weight polymeric dispersant for deflocculation of all type of pigments.

PAT-ADD DA 948 is a 100% polymeric dispersing agent for use in industrial solvent-free paints, sealants and pigment concentrates. The product is specially designed for use in EPand PUR floorings, systems based on polyols, UPR (unsaturated polyester) or thermoplastics, such as used in, PUR foams, plastisols and gel coats Using PAT-ADD DA 948 in pigment concentrates results in low viscosity, enabling higher pigment loadings, at optimal pigment dispersion.

Solventfree Aqueous, Aliphatic polyurethane dispersion based on a special polyeste

High molecular weight polymeric dispersant for deflocculation of all type of pigments

Sogel Hybrathan™ Gel coats are developed from special unsaturated polyester resins combined with special additives. These gel coats provide an exceptional class A surface for products manufactured using polyurethane substrates in close-up molds (compressed and heated molds) and open-molding processes (spraying). Our Hybrathan ™ Gel coats are easy to use. They can be used with any manual spray equipment. Unlike polyurethane gel coats, these gel coats have a better gloss retention (over 80%), no porosity and an affordable price.

SD Korea SBA-2023NP is the promoter to improve bonding strength between interface of PVC and fiber. In the case of PVC paste sol it can be applied and is good in the points of sol viscosity stability called pot life.

Michem® Dispersion Urethane 4075 is an APE free product that provides excellent abrasion resistance, water resistance, and high flexibility for floor coatings and parquet lacquers. This product can be used as a one component as well as a two component systems.

Solvent-free wetting and dispersing additive for solvent-borne and water based industrial coatings as well as in architectural coatings

HMP-1205 is a Water based polyurethane dispersion with Excellent flexibility.

Bondthane™ UD-220 is primarily used for high quality wood and plastic coating but has superior properties on many rigid substrates.

Radiation-curing, Aliphatic urethane acrylate, dissolved in a reactive thinner.

HMP-1011 is a Water based polyurethane dispersion good adhesion adaptability with UV coating.

UTHANE® 55L-J013 Blue Gloss High Solids 2K is a two component VOC compliant polyurethane with excellent hardness, and mar resistance. The coating can be cured by air dry or forced dried.

UROTUF® L51 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N methylpyrrolidone, and amines. UROTUF® L51 is suitable for both air-dry and force-dry applications.

Akuarane DTP 1330 has high clearness and good emulsion stability against pH level.