Products in Paints & Coatings: Radiation Curable Coating

AFCONA 3030 is a slip and leveling additive for both solvent and water-based systems. It is a polyether-modified polysiloxane and is recommended as a slip and leveling agent to prevent Bénard Cells and provide leveling and prevent craters. It can be used in both water- and solvent-based applications, though it may stabilize foam in water-based coatings.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

AFCONA 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam. It is specially developed for all solvent-based systems where slip is the most important factor and foam stabilization is undesirable. AFCONA 3250 belongs to the same family as AFCONA 3230. But while AFCONA 3230 is effective only in polyurethane coatings, AFCONA 3250 works in all solvent-based coatings.

AFCONA 5065 is very effective, offering performance close to that of a high molecular weight dispersant. It is recommended for medium to high polarity systems, such as PU, UPE, UV, NC, heat-cured paints, and acid-cured systems. This product is also widely used in printing inks. However, it is not recommended for air-drying alkyds due to potential incompatibility with these systems.

AFCONA 3034 is an additive designed to reduce surface tension, improve substrate wetting, and provide anti-crater performance and leveling, including vertical leveling. Its fluorocarbon modification gives it a very low surface tension, further enhancing its performance in anti-crater properties, substrate wetting, and leveling.

AFCONA 3239 is an additive designed as a slip and leveling agent that also offers defoaming. It is a very suitable leveling agent for epoxies, and will not stabilize foam, but instead act as an effective defoamer in such systems.

AFCONA 4570 is a highly effective polymeric dispersant for stabilizing inorganic and organic pigments, as well as carbon blacks. It exhibits excellent stability due to its steric hindrance and electron repulsion characteristics, making it suitable for use with all types of pigments. It is a high molecular weight dispersant, promoting good color acceptance and resin-free pigment concentrate preparation. This modified polyacrylate polymer is an ideal solution for a wide range of applications.

AFCONA 4080 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. It has excellent stability performance due to steric hindrance, and is suitable for deflocculation of all types of pigments. It is a modified polyurethane polymer with a high molecular weight.

AFCONA 3670 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. AFCONA 3670 is an improved version of AFCONA 3777 on managing surface control of coatings. It has lower surface tension than AFCONA 3777. The combination with a suitable polysiloxane for better overall performance is highly recommended.

AFCONA 4071 is a high molecular weight polymeric dispersant for deflocculation of all types of pigments. It is the result of an innovative concept of polyurethane dispersants. This technology is based on a newly-developed intermediate monomer and anchoring groups. AFCONA 4071 has excellent performance dispersing carbon black. It gives very good blue undertones with high jetness.

AFCONA 2270 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers good compatibility with most resin systems and is suitable for systems ranging from low to high polarity. It is recommended for medium-viscosity coatings applied using brush and conventional spray application.

AFCONA 4531 is a high molecular weight polymeric dispersant that can be used in both water- and solvent-based paints. It effectively stabilizes inorganic and organic pigments in these systems through steric hindrance and electrostatic repulsion, providing excellent stability performance on all types of pigments.

AFCONA 3777 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. It is the 1st generation of fluorocarbon modified polyacrylic. Recommended as non-silicone leveling agent where silicone is not permitted due to intercoat adhesion problems. However, we highly recommend a combination with a suitable polysiloxane for better overall performance.

AFCONA 3585 is a silicone-based leveling, substrate wetting and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. It is an organically modified polysiloxane for aqueous systems. AFCONA 3585 offers very strong surface tension reduction and good compatibility performance.

Lo-Vel® 2018 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Minex® 14 belongs to the Minex® range of functional fillers and extenders, which are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. With its use, excellent brightness, tint retention, and weatherability can be achieved in exterior paints. In interior paint formulations, it improves color, sheen uniformity, chemical and stain resistance, and durability. This product is easily dispersed in all conventional vehicle systems. Its low oil absorption permits high loadings in adhesives, sealants, and aqueous- and alkyd-based paints.

AFCONA 2024 is a strong defoamer with leveling performance for all solvent-based coatings. It is a unique defoamer. It has very strong defoaming and anti-foam performances with additional good leveling. This is in contrary with most of the other defoamers, which influence the leveling performance negatively.

AFCONA 4017 is a polymeric dispersant mainly used for co-grinding. AFCONA 4017 is a polymeric dispersant mainly developed for co-grinding purposes for coil and can coating, heat cured polyester and acrylic, and epoxy, as well as polyurethane. This product does not depend on polarity and performs well in almost all resin systems, especially when co-grinding dark colors.

AFCONA 2290 provides anti-foam and de-aeration properties for solvent-containing and solvent-free systems of epoxy, polyurethane, UPE and UV coatings. AFCONA 2290 contains a non-silicone defoaming substance which offers very good performance in both defoaming and anti-foaming. Due to its strong defoaming properties and silicone-free composition, it is also very suitable for primer coatings.

AFCONA 2045 is a silicone-based defoamer used to prevent the formation of foam and blisters during manufacturing and application of solvent-based coatings, including polyurethane clear coats. It is effective even in difficult situations such as airless spray, brush, and roller application, and has strong defoaming properties with a very good transparent appearance.

AFCONA 3238 is an additive designed as a slip and leveling agent that also offers defoaming. For matte finish coatings, the addition of AFCONA 3238 will help in the orientation of matting agents. In UV curing systems, this product further reduces gloss when added together with a matting agent.

AFCONA 3580 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. AFCONA 3580 is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

AFCONA 5010 is tailor made as an effective dispersant for TiO2 and extenders. It helps to wet and disperse inorganic pigments making it an effective dispersant for TiO2. However, if a white base will be tinted with other colors later, AFCONA 4010 would be a better choice.

AFCONA 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam. AFCONA 3251 is specially developed for solvent-based systems where slip is the most important factor and foam stabilization is undesirable. Its performance is similar to AFCONA 3250, only with better leveling.

AFCONA 5585 is an effective dispersing agent for the preparation of solvent- and water-based pigment concentrates in industrial and architectural coatings. This is a high molecular weight dispersing agent which stabilizes pigments through steric hindrance, making it suitable for all types of pigments.

AFCONA 4063 is a high molecular weight polymeric dispersant for the deflocculation of all types of pigments. AFCONA 4063 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance gives it very good stability performance with all type of pigments, especially in organic red, yellow and violet pigments.

AFCONA 4202 is a high molecular weight polymeric dispersant for deflocculation of all type of pigments. It is a very compatible polymeric dispersant, as it is compatible with almost all the resin systems in the market ranging from alkyd to NC, CAB, epoxy and thermoplastic acrylic.

AFCONA 4550 is a polymeric dispersant used for stabilizing inorganic and organic pigments in water-based systems. Its high molecular weight and pH-independent nature provide good stability performance with all types of pigments. It is a modified polyacrylate polymer that helps to deflocculate pigments in water-based decorative and industrial paints.

Lo-Vel® 6000 is a synthetic, amorphous silicon dioxide flatting agent that is designed for use where a Hegman value of 5 to 6 is required. The combination of high flatting at low use levels and ease of incorporation delivers expanded formulation flexibility.

AFCONA 3581 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. Organically modified polysiloxane for aqueous systems. It is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

AFCONA 3277 is an anti-cratering, substrate wetting, and leveling agent for solvent-based coatings. It is a fluorocarbon-modified polyacrylic, and can be used as a non-silicone leveling agent when silicone is not permitted due to intercoat adhesion problems. However, we highly recommend using a combination of AFCONA 3277 and a suitable Polysiloxane for better overall performance if silicones are permitted.

AFCONA 2503 is a waterbased defoamer and anti-foam agent with leveling properties that is especially useful in high shear applications such as pigment concentrates. AFCONA 2503 is an organically modified polysiloxane which is designed to give good defoaming, anti-foam and leveling performance in all waterbased applications.

AFCONA 6960 is a micronized PTFE wax for all types of paint, ink and plastic surface modifiers. It gives better transparency to wet paint and final coating comparing to other PTFE waxes that are available in the market. It also provides anti-blocking and anti-scratch properties.

Minex® EP-315 belongs to the Minex® range of functional fillers and extenders, which are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. With its use, excellent brightness, tint retention, and weatherability can be achieved in exterior paints. In interior paint formulations, it improves color, sheen uniformity, chemical and stain resistance, and durability. This product is easily dispersed in all conventional vehicle systems. Its low oil absorption permits high loadings in adhesives, sealants, and aqueous- and alkyd-based paints.

Deuteron® UV 1242 consists of solutions incorporating bis(dodecyl phenyl)-iodonium hexafluoroantimonate dissolved in reactive solvents. The solution utilizes C12/C14 glycidyl ether as a reactive thinner and contains antimony. Notably, it ensures minimal benzene emissions and maintains a low-odor characteristic. This solution presents itself as a brownish, viscous liquid suitable for various applications within the specified context.