Products in Paints & Coatings: Calcium Salts

Lubricarb® Coated Calcium Carbonate is used widely in polymer composites to improve the physical properties, and allow various functionalities and improved workability. At the same time, the cost of the polymer composites can be decreased greatly by replacing the volume of expensive resin with this filler.

MICROCARB NF4 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Juraperle LMO is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, paper, paperboard, cleaning mixtures, and polishing mixtures. Juraperle LMO is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.3 g/cm3.

Micronized Products Mica 40# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Guangzhou Hoten Chemical Barium Sulfate Natural HTN-NS With 13g /100g oil absorption, Hoten Super Fine HTN may effectively improve the concentration of the critical material in coating, reduce the level of addition of the resin or solvent in formulas and cut down costs. The optimal leveling property of Hoten Super Fine can be maintained even in relatively high filler level. The rhombic or ramiform barium sulfate crystals of Hoten Super Fine HTN uniformly distribute in coating and effectively stop or reduce the formation of light reflecting area. The gloss of coating varies depending on the different finenesses of Hoten Super FineHTN products. Therefore it is recommended for controlling the manufacture and production of gloss type products. In addition, the optimal fluidity of and mean grain size D 50 < 1.0um of Hoten Super Fine HTN make it well combine with the resin in formulas, there by resulting in dense and tough final products.

Nordkalk C-2 consists of three products: Nordkalk C2, Nordkalk C5 and Nordkalk C7. The specific characteristics of Nordkalk C-Series products are presented in the table below. The products are available in large and small sacks and in bulk.

EXCAL® 325 processed from a high-purity buff colored limestone ore to exact specifications. Suitable for use in loss circulation drilling fluids, building materials and other industrial applications where lower economics are necessary.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

Geotex® FXZ is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. FXZ can be used as a texturizing agent in coatings, plaster, EIFS, as an abrasive in many applications and as a filler in PVC flooring. The marble crystal structure is useful in recirculation drilling fluids.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

NiCHEM No. 8842 Calcium Chromate is a chromate primer poigment that is easy dispersing. It is soluble in diluted acids and slightly soluble in water.

Microblanc 2 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 2 is the re-enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Calcit CalPlex 1 is a natural, ground calcium carbonate of exceptionally high purity. With an extremely fine particle size distribution and high whiteness CalPlex 1 shows excellent performance in the production of paper, paints, lacquers and plastics.

Juraperle 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 0.5-1 is similar to sand or gravel in appearance with a characteristic odor and is not flammable. This product has a grain size of 0.5-1.0.

Ulmer Weiss 150/300H is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss 150/300H is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.2 g/cm3.

Microblanc 1 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 1 is the re-enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Geotex® 30-50 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

Ulmer Weiss 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 0.5-1.0 is similar to sand or gravel in appearance with a characteristic odor and grain size of 0.5-1.0. This product does not flash and is non flammable.

Casal De Rey Calcium Octoate 6% used separately has no effect on the reaction of oxygen in the air with materials that can be polymerized by oxidation. However, in combination with other cobalt, lead and zirconium driers, it produces a reinforcing action of their effect, achieving excellent results with their use, achieving excellent results with their use.

Zetatalc EW 20 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 20 renders these unique properties it possesses wherever it is applied.

Shiraishi Kogyo Kaisha Homocal-D is a ultra-fine calcium carbonate which has 80 nm of particles as primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Homocal-D is commonly applied to paint application where high concentrate formulation is required. Homocal-D contributes to improve brushing feature at the painting, also contributes to create glossy but smooth paint surface. Homocal-D, at the blend use with TiO2, contributes to improve water resistance, better anti alkaline and anti-gasoline properties.

HisarCal® Ex-40 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Petra Calcium Carbonate Treated Calcium Carbonate Powder is used in a variety of industries, including plastic, master batch, paint, and electric cables.

Microcarb® 3DA is a product designed by our technical department to maintain specific quality characteristics that meet the special needs of plastic and paint markets. This product also complies with and is certificated by the NSF standar for potable water PVC manufacture. Aside from an upper color quality this products also stands out for its high chemical purity.

VERDOL D-60/80 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Zetafil CST 1 is described on a very white and pure crystalline CaCO3 raw material. Zetafil CST 1 is specially coated by an organic agent which transforms the surface of the inorganic particles into an organic one, thus achieving full compatibility of the filler to the resin. Due to its special particle size distribution and hydrophobic surface, Zetafil CST 1 is easily dispersed. Zetafil CST 1’s brightness value enables formulators to economize in Titanium Dioxide. The abrasive index of Zetafil cst 1 is exceptionally low due to the purity of the raw material, the fineness of its particles and the coating of its surface.

EXCAL® CW 200 processed from a high purity white calcium carbonate marble ore, to exact specifications.Used in oil and gas completion fluids, plastics, coatings, adhesives and other specialty applications where color, solubility, binder demand are of importance.

CalciRC 100 acts as a filler. It is a dry powder with high brightness and controlled top-cut. Has high purity, unique particle shape and narrow particle size distribution. Offers high whiteness, low iron content, low levels of heavy metals, low abrasivity, less agglomeration and better flow as well as rheological properties. Also offers lower density, no dust or waste from ultra-fine particles, optimum optical properties and relatively low surface area. It helps to achieve 6-sigma process control. Used in paints and printing inks applications.

Granifort® Ultra White designed for use in the glass industry as flux are mainly characterized by very high purity, very low iron oxide content and a total absence of infusible crystalline particles.

Guangzhou Hoten Chemical Synthetic Barium Sulfate HTS-M is a chemically synthesized barium sulfate product (BLANC FIXE) refined through special manufacturing processes with highly pure barium salt and sodium sulfate as its raw materials. Its grain sizes are under strict control in the course of reactions and synthesis and content of impurities is minimized. It features low specific weight, gentle and stable nature, narrow distribution of grainsizes, extremely good light fastness, weathering resistance and other outstanding chemical properties.

ASCOM 70 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

MS Saraf Resins & chemicals Calcium Octoate finds application as pigment wetting agents and reduce loss of dry problems. Our Liquid Calcium Octoate is extensively used in water proofing compositions, adhesives etc. We have firmly positioned as one of the leading Calcium Octoate Chemical Manufacturers and Suppliers based in India.

Kish Company Barium Sulfate Precipitated Grade is a high brightness, low oil absorption, inert extender that is well suited for a variety of application including powder coatings, thermoplastics, elastomers, fiber, paper, ink and pigment preparations. Precipitated Barium Sulfate has a Mohs hardness of 3 and is very low in abrasion. It exhibits a continuous, high diffuse reflectance of light, not only in the visible range, but also far into the UV and IR ranges. It is the ideal extender of colored systems. In coatings, Precipitated Barium Sulfate is recommended in high gloss, acid-resistant formulations. Precipitated Barium Sulfate is inert, resistant to light and weathering, and insoluble in water, acids, alkali and organic media.

Juraperle MM is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle MM is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.0 g/cm3.

Mississippi Lime Company Magnum Fill 65% Slurry is designed for both paper filling applications and as an extender pigment for coatings. As a filler in paper, it provides high brightness, good opacity and excellent drainage. In paper coatings, outstanding ink receptivity and exceptional brightness properties are obtained. In other coatings, Magnum Fill® will provide excellent hide, brightness and blue-white shade for clearer, brighter colors.

Guangzhou Hoten Chemical Barium Sulfate Natural HTN-NR With 13g /100g oil absorption, Hoten Super Fine HTN may effectively improve the concentration of the critical material in coating, reduce the level of addition of the resin or solvent in formulas and cut down costs. The optimal leveling property of Hoten Super Fine can be maintained even in relatively high filler level. The rhombic or ramiform barium sulfate crystals of Hoten Super FineHTN uniformly distribute in coating and effectively stop or reduce the formation of light reflecting area. The gloss of coating varies depending on the different finenesses of Hoten Super Fine HTN products. Therefore it is recommended for controlling the manufacture and production of gloss type products. In addition, the optimal fluidity of and mean grain size D 50 < 1.0um of HOTENSUPER FINE HTN make it well combine with the resin in formulas, thereby resulting in dense and tough final products.