Products in Paints & Coatings: Rheology Modifier

TACKIFIER 15 is a solvent-free, water borne tackifier dispersion of a mixed alyphatic-aromatic hydrocarbon resin, designed to provide very good adhesive performance to a wide range of substrates. Ring & Ball value of the base resin = 85°C approx.

Kelly Chemical 3600N is Polyether ester type surfactant.

KISHNER® 7, as one kind of protective colloid, KISHNER® 7 will enhance stability of emulsion polymerization system to evenly scatter the additive of pigment and filler etc. Into painting so as to impart it will good pigment adhesion effect. Sodium CMC can evidently improve the viscosity of painting latex, anti-splash and sag resistance of painting in order to improve the workability of painting.

CUMAR® P-25 is a low molecular weight, liquid hydrocarbon tackifying resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.

BS-1C-FF is an organic derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic system, such as mineral oil, paraffin oil, toluene, xylene, 200# solvent oil. The performance of BS-1C-FF is similar to Claytone 40, Bentone 38, 34.

HUATE BK-883 has a strong thickening ability, good compatibility, need polar activator. Applicable to low and middle polar solvent systems. It is also used in paints, printing inks, sealants, lubricating greases, paint filers, atomic ash, mixed paints, etc. The international countertype of BK-883 is Bentone-34.

Wood Kote Products AceThin is intended for professional use only. It is an aggressive general-purpose solvent used to reduce the viscosity of Wood Kote nitrocellulose-based lacquers, acetone-based dye stains and solvent-based polyurethanes. It is recommended as a substitute for LaqThinT-99A (lacquer thinner) and PolySolvent (mineral spirits) where regulations require dilution with a VOC-exempt solvent.

Polybut™ 150 is a low molecular weight conventional polybutene.

EZ GEL MS is a multi functional treated mineral that provides excellent anti-settling properties and superior sag control with minimal impact on viscosity.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

TAFIGEL PUR 48 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 48 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 48 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from North America in the form below. Kraton D1171 PT - supplied as a dusted dense pellet Kraton D1171 P can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen.

PISTRONG™ P2481PR is Engineered as a both a tool for wetting out foreign anatomies and a novel degassing agent.

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Omnivad Mirroflex SB 50 % is a product specifically designed for the Energy Curing coating and ink industry. This product can be used in many applications where high gloss and flexibility are required. Omnivad Mirroflex SB 50% is an outstanding coating modifier for clear and pigmented coatings.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Calcit CalPlex 2 is a natural, ground calcium carbonate of exceptionally high purity. With an extremely fine particle size distribution and high whiteness CalPlex 2 shows excellent performance in the production of paper, paints, lacquers and plastics.

Polybut EM HR 1000 (A-75) is a water-based emulsion of low molecular weight polyisobutene.

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Pioneer Chemicals Thick AC-50 is an acrylic acid-type thickener, which when neutralized with an appropriate alkali produces a flowable viscous solution. Thick AC-50 is used as an auxiliary thickener in alkaline aqueous printing/coating systems.

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Xinyu South Wollastonite XYNFW-F50 is a typical metamorphic mineral, which has primarily occurred in contact belt between acid rock and limestone, and sometimes occurred in deep metamorphic Calc schist, volcanic product and in some alkaline rock. Wollastonite is a thin plate-like crystal of triclinic crystal system whichbelongs to a chain silicate. Its aggregation is radial or fibrous. Its special crystal structure determines its properties, Wollastonite with the advantage of non-toxic, acid and alkali resistant, low hygroscopicity, low oil absorption, low conductivity, good insulation, high whiteness, thermal stability and dimensional stability good, excellent mechanical properties and electrical characteristics. Wollastonite is a natural green, low carbon emission and energy saving industrial mineral.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

SUPBENT 3000 Rheological Additiveis a highly purified white clays, refined from carefully selected, highly purified naturally attapulgite Clay. There are many advantage by adding SUPBENT 3000 as following: Viscosity Stability and Reproducibility in Emulsion and Water Soluble Systems;Prevents Pigment Settling.; Film Reinforcement Through its Unique Gel Lattice Structure .

Zhejiang Hongyu New Materials HY-708B Organic Bentonite is a refined organic bentonite modified by traditional quaternary ammonium salt, an excellent suspension thixotropic agent for dissolving system, suitable for paints, inks and other products with low and medium polar solvents.

PAT-ADD RHEOL 100 is HEUR based liquid rheology modifier for aqueous systems. This product contains low volatile organic components. PAT-ADD RHEOL 100 provides excellent anti-settling and anti-sagging properties while reducing risk of roller spattering during application. PAT-ADD RHEOL 100 is supplied in ready for use form and easily incorporated.

Shanghai Tengmin Industry Special Barium Sulfate Premium Grade is a white powdery substance, non-toxic, tasteless, insoluble in water, acid, alkali and organic solvents, only soluble in hot concentrated sulfuric acid, and does not react with any gas.

Shanghai Tengmin Industry Barium SulfateTM325 is a white to fine powder, odorless and tasteless. Decomposes above 1600 ℃. Soluble in hot concentrated sulfuric acid, almost insoluble in water, ethanol and dilute acid. Barium sulfate has plate-like crystals, complete cleavage with close angle intersections, specific gravity 4.0-4.6 , foaming when exposed to hydrochloric acid cloth, strong chemical inertness, and good stability. Good barium sulfate has high reflectivity and can absorb harmful rays. , Is a kind of material with environmental protection function.

Zhejiang Hongyu New Materials HY-738Y Organic Bentonite is made from natural calcium bentonite which has been highly purified, modified and organically modified. It is mainly suitable for paints, inks and other products with low and medium polar solvents.

Altakem HD725 is a unique novel reactive complex catalyst and reactive diluent designed for decorative alkyd enamels.

JINGYI BK-883B has a strong thickening ability, good compatibility, need polar activator. Applicable to low, middle and high polar solvent systems especially suit for 200# solvent, coal tar, arene, etc. it is also used in paints, printing inks, sealants, lubricating greases, putty, mixed paints, bitumen paints, chlorinated rubber paints, epoxy paints, anticorrosion paints, container paints, etc. The international countertype of BK-883B is Bentone-52.

HT-W603 is a modified, refined bentonite for water-based systems.

Ez Gel 15A100 is a line of rheology modifiers that help control sagging and settling in water and solvent-based coatings systems.

Kraton D1114 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied from North America in the physical form identified below. Kraton D1114 PT - supplied as a dusted dense pellet Kraton D1114 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Geotex® TXS is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. TXS can be used as texture finish in coatings, plaster, and stuccos. The marble crystal structure is useful in recirculation drilling fluids.

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.