Products in Floor Coatings: Slip Agent

Efka® SL 3258 is a solvent-free, 100% active, polyether-modified polysiloxane serving as a non-reactive slip modifier, leveling agent, and substrate wetting agent for printing inks, paints, and coatings. Its chemical nature involves an organo-modified polysiloxane. It is suitable for UV, solvent-borne, and water-borne applications, achieving excellent surface tension reduction in UV systems, leading to an improved gloss level.

Efka® SL 3033 is a highly effective additive that increases slip and surface smoothness. With excellent compatibility properties, it is suitable for use in clear coatings. It improves leveling, scratch and abrasion resistance, prevents floating, enhances anti-blocking characteristics, and prevents cratering.

Efka® FL 3741 functions as a silicone- and solvent-free flow and leveling agent with excellent air release properties for various reactive resin systems. It modifies the surface tension, eliminating or reducing peeling, and improves flow, dispersion, and floating behavior. Additionally, it prevents air entrapment and optimizes substrate wetting in reactive resin systems.

Efka® SL 3883 is a reactive slip and leveling agent. It offers improved slip, surface smoothness, increased anti-blocking effect, good substrate wetting, and even distribution of matting agents. The chemical nature involves a polysiloxane-modified polymer with unsaturated terminal groups. Reactive groups crosslink with coating and printing ink systems cured by photo initiators or peroxides. It finds applications in various coatings, especially wood and plastic coatings and paper finishes, cured by vinyl polymerization.

Efka® SL 3236 functions as a slip and leveling agent, being an organically modified polysiloxane soluble in various solvents. It improves general surface characteristics and is recommended for non-aqueous coatings like baking enamels, acid-curable or polyurethane wood finishes.

Efka® SL 3030 functions as a slip and leveling agent, universally compatible with various coating systems. It does not cause cratering even in high concentrations and offers benefits such as improved leveling, increased scratch and abrasion resistance, prevention of floating, improved antiblocking characteristics, and acts as a defoamer and de-aeration aid.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

AFCONA 3236 is an additive designed to provide slip and leveling, as well as good defoaming performance. It is an alkyl-modified polysiloxane that offers excellent slip and leveling properties. Unlike other organically modified polysiloxanes, AFCONA 3236 acts as a defoamer and does not stabilize foam in most systems, making it suitable for foam-sensitive applications such as floor coatings and high-build systems.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

AFCONA 3033 is an additive designed to improve the slip and leveling performance of solvent-based coatings. It is an end-modified special polysiloxane, which enhances the dry slip characteristics of coatings, making it particularly suitable for wood coatings and thermoplastic resins.

AFCONA 3030 is a slip and leveling additive for both solvent and water-based systems. It is a polyether-modified polysiloxane and is recommended as a slip and leveling agent to prevent Bénard Cells and provide leveling and prevent craters. It can be used in both water- and solvent-based applications, though it may stabilize foam in water-based coatings.

AFCONA 3034 is an additive designed to reduce surface tension, improve substrate wetting, and provide anti-crater performance and leveling, including vertical leveling. Its fluorocarbon modification gives it a very low surface tension, further enhancing its performance in anti-crater properties, substrate wetting, and leveling.

AFCONA 3239 is an additive designed as a slip and leveling agent that also offers defoaming. It is a very suitable leveling agent for epoxies, and will not stabilize foam, but instead act as an effective defoamer in such systems.

AFCONA 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam. It is specially developed for all solvent-based systems where slip is the most important factor and foam stabilization is undesirable. AFCONA 3250 belongs to the same family as AFCONA 3230. But while AFCONA 3230 is effective only in polyurethane coatings, AFCONA 3250 works in all solvent-based coatings.

AFCONA 3670 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. AFCONA 3670 is an improved version of AFCONA 3777 on managing surface control of coatings. It has lower surface tension than AFCONA 3777. The combination with a suitable polysiloxane for better overall performance is highly recommended.

AFCONA 3238 is an additive designed as a slip and leveling agent that also offers defoaming. For matte finish coatings, the addition of AFCONA 3238 will help in the orientation of matting agents. In UV curing systems, this product further reduces gloss when added together with a matting agent.

AFCONA 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam. AFCONA 3251 is specially developed for solvent-based systems where slip is the most important factor and foam stabilization is undesirable. Its performance is similar to AFCONA 3250, only with better leveling.

Afcona - 3236 is an additive designed as a slip and leveling agent that also offers good defoaming performance.

OE-6103 with very good gloss keeping property, excellent abrasion resistance, especially suitable for water-based coatings and inks.In water-based flexo printing inks, OE-6103 can improve the abrasion resistance of ink layers and keep well of the coating gloss.In water-based coatings, OE-6103 can effectively improve the scratch&abrasion resistance and provide very good slip effect.

Additive designed as slip and leveling agent with good defoaming effect.

Additive designed as slip and leveling agent with good defoaming effect.

Additive designed as slip and leveling for solvent-based coating

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

Additive designed to perform the highest slip in all solvent based coating without foam stabilizing property

CERETAN® MO 3220 WD is a Spherical, micronized, surface-modified polyethylene wax. This Product can be used as a hydrophilic character – easy to disperse in water based systems, improved slip and anti-blocking, matting effect, improved abrasion and scratch resistance.

Anti-crater, substrate wetting and leveling agent for solvent-based coatings

Additive designed to perform the highest slip in all solvent based coating without foam stabilizing property

Afcona 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties.

Additive designed as slip and leveling agent with good defoaming effect.

Slip and leveling additive for solvent and water-based system

Special modified Polysiloxane for slip, defoaming and improvement of surface characteristics