Products in Building & Construction: Radiation Curable Ink

Microblanc 1 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 1 is the re-enforcement of the hiding power of paints, this is due to its unique particle size distribution.

bossin® W-106 is a suitable pigment for dispersion, flexibility and biological degradation.

FluorAcryl 3298 is a hydrophobic and oleophobic acrylate that produces hard scratch resistance coatings. This oligomer is compatible with UV/EB curing. FluorAcryl has a high Tg, good water resistance, high impact strength and good solvent resistance.

UVP 0825 is tetrafunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has a high cross link density which helps to enhance abrasion and solvent resistence.

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

CoatOSil™ 1211C coatings additive helps enable wetting of waterborne systems on common and hard-to-wet substrates. The product's nonfoaming characteristics and superwetting properties make it an excellent candidate to consider for coatings applied by spray or high-speed roll methods. CoatOSil™ 1211C coatings additive applications may include coatings for plastic films and components, wood and glass coatings. May improve results on less than optimal prepared surfaces.

Quindo Red 1103 is Pigment for Inks and Coatings.

Omnirad DETX is a highly effective Type II photoinitiator. In conjunction with tertiary amine synergists it is used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

x-bond® U 9071 is a bifunctional silane binder. Acts as a curing agent and scratch resistant agent. Exhibits flexibility with excellent UV- and chemical resistance. Applications in varnishes based on polyurethane, polyacrylate or polyester.

UVP 0835 is hexafunctional acrylated polyester oligomer. It adds fastcure response, hardness and abrasion resistence to UV/EB curable inks coatings and adhesives.

Cinilex® Yellow SYIH is suitable for both solvent-borne and water-borne ink systems, are an ideal choice for lamination, UV systems and inkjet inks where excellent lightfastness, weathering fastness and food contact are required. Our Cinilex portfolio of high performance organic pigments consists of a range of high quality and highly durable products for use in a wide range of coating and paint applications. This focused range are characterized by high chroma, high color strength and high opacity in conjunction with outstanding weather fastness and light fastness. Both opaque and transparent grades are available for the majority of the chemistries in the range. Fully compliant with all the regulatory requirements of the global market, this portfolio offers our customers the possibility to standardize their pigment selection onto just a few products.

DCL Corporation 5352 Phthalocyanine Blue, PB.15:2 is an alpha, red shade phthalocyanine blue treated to provide crystal stability and flocculation resistance. 5352 is FDA Approved (Section 178.3297).

Photomer® 6631 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings. It exhibit of good scratch and abrasion resistance in combination with high reactivity.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

Esacure KTO 46 is a stable liquid mixture of Trimethylbenzoyldiphenylphosphineoxide and - hydroxy ketones and Benzophenone derivatives.It is particularly indicated for the photopolymerisation of UV curable pigmented systems when high reactivity, low curing odor and low yellowing are required.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

Omnipol 9210 is a photo-initiator with high reactivity, good compatibility, low odor and migration, and with low fragments releasing after curing. It is especially designed for use in inks and coatings requiring low migration and low volatiles.

Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odor and low yellowing are required characteristic.

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Pergopak® M3 is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention.

FONTAINE SHAN Cyclic Trimethylolpropane Formal Acrylate CTFA is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereolithography, and photopolymer printing plates.

Omnirad TPO is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Versal® YELLOW 8GN is Disazocond pigment. Used in flexografic, gravure, offset, letter inks and water based paints.

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

Cinilex® DPP Red ST is suitable for both solvent-borne and water-borne ink systems, are an ideal choice for lamination, UV systems and inkjet inks where excellent lightfastness, weathering fastness and food contact are required. Our Cinilex portfolio of high performance organic pigments consists of a range of high quality and highly durable products for use in a wide range of coating and paint applications. This focused range are characterized by high chroma, high color strength and high opacity in conjunction with outstanding weather fastness and light fastness. Both opaque and transparent grades are available for the majority of the chemistries in the range. Fully compliant with all the regulatory requirements of the global market, this portfolio offers our customers the possibility to standardize their pigment selection onto just a few products.

Omnirad BMS is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated monomers and oligomers e.g. acrylates after exposure to UV light

Esacure KIP IT is a liquid mixture of Esacure KIP 150 (65% ) and Propoxylated glycerol triacrylate (35%). It is by high reactivity and non-yellowing properties. It is particularly recommended when low odor and low yellowing are required characteristics

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

DCL Corporation 1816 Dianisidine Orange, PO.16 is a blue shade orange pigment for use in plastic, ink and coating applcations. DCC Orange 1816 can also be used as a lead free alternative to molybdate orange.

Ningbo Precise Color Fast Yellow 4GP is a greenish yellow pigment powder, with high color strength and excellent processing stability, excellent heat resistance and light fastness, semi-transparent. Recommend for PVC, PU, RUB, PE, PP, Fiber, EVA, PS, decorative paints, industrial paints, powder coating, coil coating. You can check TDS of Pigment Yellow 151 below.

MPD Industries UVP 0610 99 is a di functional Bisphenol A epoxy acrylate oligomer gel. This product is characterized by its light color and high reactivity. It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

Omnirad 4MBZ Flakes is an effective Type II photoinitiator used, in combination with tertiary amine synergists, to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.