Products in Renewable Energy

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Valtron® AD1238A-AD3853B Epoxy System is a temporary adhesive system for monocrystalline and multicrystalline ingots for wafer slicing. Longer working time than AD1238-A / AD3848-B.

Valtron® AD1339A-AD3939B Epoxy System is a general temporary adhesive system which offers a unique solution for adhering semiconductor and photovoltaic ingots to mounting fixtures and slicing beams.

Valtron® AD1846A-AD1851B Epoxy System is a temporary adhesive system for mounting monocrystalline and multicrystalline ingots for the photovoltaic and LED wafer slicing process. It has good water resistance. Applicable for diamond wire saw with selected debonding solutions.

Valtron® AD1339A-AD3905B Epoxy System is a general temporary adhesive system for mounting monocrystalline and multicrystalline ingots for the photovoltaic and semiconductor wafer slicing process. Longer working time than AD1339-A / AD3939-B. Applicable for automatic dispensing systems.

Valtron® AD5038A-AD5038B Epoxy System is a low viscosity, temporary adhesive system ideal for slicing applications where polyethylene glycol (PEG), PEG/water and water coolant is used as a slicing vehicle or a coolant. It has good water resistance.

Valtron® AD1238A-AD3848BR Epoxy System is a temporary adhesive system for monocrystalline and multicrystalline ingots for the wafer slicing, fast-curing and high bond strength. Applicable for automatic dispensing systems.

Boron Nitride NanoBarb™ BNNB-P-90A1 uses a proprietary, catalyst-free process, to manufacture an enhanced boron nitride nanotube called the Boron Nitride NanoBarbTM, with properties enhanced beyond typical nanotubes further making the NanoBarbTM a strategic component for improving advanced materials.

savE® FS42 is form stable phase change material, liquid PCM embedded in polymer matrix.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

VBASE® 46U base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

CoreLite PVC F 60 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

savE® HS24 is an inorganic phase change material.

savE® OM48 is an inorganic phase change material.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion. Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. CoreLite PET can handle processing temperatures up to 150 °C (302 °F) . During high temperature processing it is thermally stable and no outgassing or expansion after postcure occurs. In the event of fire, no toxic gasses are generated.

savE® HS36 is an inorganic phase change material.

savE® OM65 is an inorganic phase change material.

IRASORB BITO, the blue Indium Tin Oxide shows higher electrical conductivity and higher absorption in near infrared light compared to the yellow version, which makes it useful for coatings, inks and polymeric films.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

savE® HS30N is an inorganic phase change material.

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

BALSASUD® Core is the finest end-grain balsa wood core material in the market, ideal for sandwich construction. It has remarkable physical properties, starting with its outstanding strength-to-weight ratios (high shear and compression strength). It is an all-natural and renewable resource coming from Ecuador. It has exceptional fatigue and impact resistance properties. And it provides phenomenal sound and thermal insulation. In addition, it is a natural fire-retardant material.

savE® OM32 is an inorganic phase change material.

VBASE® 32S base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

savE® HS89 is an inorganic phase change material.

VBASE® 68U base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

savE® OM08 is an inorganic phase change material.

savE® OM37 is an inorganic phase change material.

IRASORB YITO, the yellow Indium Tin Oxide is predominantly used as a starting material for various processes to generate transparent conducting layers and electrodes for displays, solar cells and similar applications.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

savE® HS29 is an inorganic phase change material.