Products in Power, Water & Utilities: Chemical Resistant

8329TCM is a 2-part thermally conductive epoxy adhesive. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This adhesive is most often used as heatsink glue, attaching heatsinks to CPUs, LEDs, or other heat generating electronics components. This compound has been formulated for high thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity use 8349TFM. For a shorter working time, use 8349TFM. For a longer working time, use 8329TCS.

8329TFF is a 2-part, flame retardant, thermally conductive epoxy adhesive with a 5-minute working time. It is an off white, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal glue is often used to bond heatsinks to CPUs, LEDs and other electronics components. This product has a very short working time. For a longer working time, use 8349TFM or 8329TFS.

8329TCS is a 2-part, heat-cure, thermally conductive epoxy adhesive with a 4-hour working time. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal adhesive is used to glue heat sinks to LEDs, CPUs and other heat-generating components. 8329TCS has been designed for maximum thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity, use 8329TFS. For a shorter working time, use 8329TCM.

8329TCF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, viscous, thixotropic, and bonds well to a wide variety of substrates. It is also flame retardant and meets the UL 94V-0 standard. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours. This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems. 8329TCF has been designed for maximum thermal conductivity with a high viscosity. For a lower viscosity, use 8329TFF. For a longer working life, use 8329TCM or 8329TCS.

CALTRAN™ N60-30 C50A insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

CGSTAPE - 8158 is a polyimide backing and acrylic adhesive offers excellent chemical and thermal resistance with excellent electrical insulating properties. This tape is used where toughness and puncture resistance are required.

CALTRAN™ 60-08 C50A insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

CALTRAN™ 60-08 C50B insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

CALTRAN™ 60-08 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

CALTRAN™ 60-30 C50B insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

CALTRAN™ 60-30 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

CALTRAN™ N60-30 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

CALTRAN™ 60-15 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

CALTRAN™ N60-15 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

CALTRAN™ N60-08 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

KALMATRON® KF-B as a protective and remedial coating penetrating into the concrete structure by at 15 cm or 6” designed for protection of concrete and masonry building structures as an ionic implant onto the structures in damp conditions to restore liquid/vapor impermeability, corrosion and freeze-thaw resistance, to stop rebar rusting and to rebuild structures by gluing of they broken parts. In a case if KF-B layer damaged, protected structure stays impermeable and densified. KF-B is best for repair of water supply and sewer systems; marine and fortification structures; facilities of the chemical and agricultural industries. Applied as a layer, it has no expansion in both the plastic and hardening phases without compensation of water. Layer of KF-B is a water impermeable under the hydraulic pressure at 14 [bar] and stable to aggressive environment at pH of 1.

Uroflex™ is a unique, two-component, 100% solid urethane-modified-epoxy (UME) and cycloaliphatic cured coating and lining system. Uroflex is a high-build, self-leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete and steel. Uroflex is applicator friendly and easy to apply; conveniently produced in a one-to-one mix ratio by volume. Uroflex is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent).

Advenira® AdvenGuard™ SDN® Nanocomposite Coating has been developed as a high performance barrier coating for corrosion protection applications. AdvenGuard™ can be used in conjunction with conversion or galvanic coatings or primers, when required, to provide superior corrosion protection.

Admix C-500/C-500 NF is added to the concrete mix at the time of batching. Admix C-500/C-500 NF consists of Portland cement, silica sand (excluding the NF grade) and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

Hempel A/S Galvosil 15700 is a solvent-borne, self-curing, inorganic zinc rich silicate primer with outstanding resistance against weathering and abrasion. Offers excellent galvanic protection of local mechanical damage. Has excellent chemical resistance within the pH range 6-9. The product is in compliance with the compositional requirements of SSPC Paint 20, Type I, Level 1 and ISO 12944 Part 5, 2018. In full compliance with ISO 3549 and ASTM D520 type II.

PREVLON 500 is a polyurethane type coatings, applied for harsh chemical environments and a wide variety of applications in various industries. This coating is the basis for popular “truck-bed liner” coatings.

Anchor Seal SY6009T* Black is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is used in low health hazard, thermal conducting switches.

Arma 901-50DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Uroflex™ 61 is a two component, 100% solid urethane‐modified‐epoxy (UME) hybrid coating and/or lining system specifically designed for utilization in potable, drinking water environments. Uroflex™ 61 is certified by UL to NSF/ANSI Standard 61. Uroflex™ 61 is a high‐build, self‐leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete, steel, and wood. Uroflex™ 61 is applicator friendly and easy to apply; conveniently produced in a one‐to‐one mix ratio by volume. Uroflex™ 61 is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent)‐ certified UL to NSF/ANSI Standard 61.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

WESCOAT® MA05H2 is a coating product that will guarantee performance and longer lifespans. WESCOAT® MA05H2 addresses the chemical, wear and erosion issues.

Poly Lining Systems PLS 477FC is a fast cure polyamide epoxy with high solid content which is capable of achieving a high build. It is designed for application to concrete and steel substrates. Steel substrates do not require extensive preparation prior to application. PLS 477FC is a semi-gloss material which can be provided in a wide range of colors. Not for use in potable water applications.

Polyglass Coatings CeraMaxx is a two-component spray-able ceramic novalac epoxy primer.

PREVLON 200 is similar to 100-Series, but with greatly enhanced chemical resistance. Able to be submerged in acids or corrosive materials for long durations of time with zero degradation. Still can be combined with base materials for even greater resistance to all forms of chemical and abrasive attack.

Mainstay® DS-5™ 100% Solids Epoxy Coating utilizes a unique, multi-component curing system that contributes to a number of superior properties: toughness, permanent flexibility, and improved chemical and temperature resistance. This system may be applied at thicknesses up to 125 mils in single or multiple applications, thereby reduc - ing application costs. The absence of solvent reduces shrinkage, cracking, and disbonding and eliminates problems related to solvent entrapment. Mainstay® DS-5 is designed for use in corrosive environments with a pH of 0.5 or lower and is typically used as a topcoat over Mainstay® ML-72 Sprayable Microsilica Restoration Mortar (see section on Application). Mainstay® DS-5 is particularly well suited for protecting sanitary sewer structures such as manholes, lift stations, wet wells, and sewage treatment plant structures.

MICORTHANE™ 6 -23 is a pigmented two component polyurethane coating that provides excellent chemical and abrasion resistance combined with superior wearability and color retention. Its rapid cure and property development make it an excellent choice for interior and exterior maintenance applications on concrete, metal, or wood. MICORTHANE™ 6 -23 is recommended as an architectural coating, a heavy-duty industrial maintenance coating, a coating for water treatment facilities and food processing facilities, as well as a host of other applications where corrosion and abrasion resistance and superior protection are important. U.S.D.A. approved for incidental food contact.

PREVLON 400 is a nylon (aka Rilsan) coatings offer a wide array of excellent properties that include chemicals resistance and tough mechanical properties. Such coatings can be used to build-up printing roll surfaces.

WESCOAT® CX01P6 is a coating product that will guarantee performance and longer lifespans. WESCOAT® CX01P6 addresses the chemical problems and wear and erosion problems.

Premier Rubber Membrane® system is a modified asphalt emulsion system using exact formulated polymers providing unique elastomeric performance. This product is engineered to achieve a seamless monolithic membrane that will bond 100% to most construction materials.