Products in Power, Water & Utilities: Defoamer

Oleic Acids

DENSIPOL® RMB is a cost-effective antifoaming agent specifically designed for controlling foam generation in waterborne technical products. This antifoaming agent is based on a non-ionic dimethylpolysiloxane emulsion, which offers reliable foam control properties. It is effective across a wide range of pH levels and salinity, ensuring consistent performance in various environments. Additionally, DENSIPOL® RMB is heat-resistant, capable of withstanding temperatures up to 70°C. With its superior qualities, this antifoaming agent provides effective foam control, enhancing the quality and performance of waterborne technical products.

TRANS-713 is a water-based non-Silicone antifoams typically incorporated in surfactants to boost efficacy and dispersibility within foaming water.

TRANS-296 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

TRANS-P2000 is a surfactant-based non-Silicone antifoams typically incorporated in surfactants to boost efficacy and d ispersibility within foaming water.

PROGILINE® FI 50100 Foam Inhibitor is a 100% active polyalkylene glycol foam inhibitor. The product is designed specifically for the defoaming and suppression of foam in sugar beet processing applications. Progiline FI 50100 is effective in various stages of the process, including diffusion, liming and carbonation. PROGILINE® FI 50100 may be dosed directly into the system, typically at concentrations of 5-20 ppm, but alternatively may be formulated with other components such as fatty acids or water to create lower cost formulations of lower viscosity, which enables easier dosing into systems. Formulations with water and fatty acid typically require only simple agitation prior to use. Progiline FI 50100 is extremely efficiently dispersed and is suitable for application in a wide range of diffusion systems.

TRANS-103AD is a food-grade in water-based variety with viscosities from ready to use to super-concentrated.

FOAMLEX® 797 is a defoamer for general-purpose. It offers excellent defoaming properties at very low concentrations.

TRANS-3033 is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-396 is a surfactant-based non-Silicone antifoams typically incorporated in surfactants to boost efficacy and d ispersibility within foaming water.

TRANS-700 is a water-based non-Silicone antifoams typically incorporated in surfactants to boost efficacy and dispersibility within foaming water.

TRANS-414 is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-100D is a tech-grade in non-aqueous silicone antifoam variety with viscosities from ready to use to super-concentrated.

TRANS-357PD is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-828 is a fast, effective, lasting defoaming power and stability in small concentrations.

Coco Fatty Acids

Toynol® Foamic-024 Defoamer is molecular defoamer used in water-based system.

Meta-Treat AF-10 is a silicone emulsion defoamer that is effective on surfactant and starch foams.

Toynol® Foamic 022 Defoamer is a molecular defoamer used in water-based system.

EFA Chemie Defoamer 1830 is a highly effective product that is successfully used in aqueous media in many processes. Defoamer 1830 is silicone and mineral oil free and breaks down into harmless components in water and sewage systems. The product can be used in medium to very high pH ranges and is stable at temperatures of up to approx. 150 °C for a certain period of time. Defoamer 1830 is a non-ionic dispersion of silicic acid derivatives, oxidized hydrocarbons, PE wax and emulsifiers.

Toynol® Foamic-025 Defoamer is molecular defoamer used in water-based system.

EXOantifoam S100 is a silicone emulsion with high anti-foaming properties. The product is designed for water systems, especially those containing surfactants, where it prevents the formation of foam and effectively reduces its amount. EXOantifoam S100 effectively removes foam in industrial processes, thus minimizing the risk of unwanted excessive foam formation.

Toynol® Foamic 023 Defoamer is a molecular defoamer used in water-based system.

DYNOFOAM KOL is an economical silicone based defoamer which can be employed in dyehouses to suppress the foam formation that is normally encountered in carpet and textile processing. DYNOFOAM KOL can also be employed in effluent treatment processes to eliminate foam in ditches and treatment ponds.etc.

IneaSil 210C is a solvent-free, high molecular weight silicone-antifoam compound. It was created specifically for use in a variety of industrial applications such as pulp processing, textile dyeing, and waste water treatment. IneaSil 210C has excellent sustaining antifoam power and significant foam knock down.

IneaSil 110C is a highly effective silicone antifoam compound that does not require any solvents. It was created specifically for use in a variety of industrial applications such as food processing, pulp processing, textile dyeing, and waste water treatment. The foam knock down on IneaSil 110C is significant.

Defoamer is a low toxicity blend of defoaming agents formulated to control foaming in muds containing freshwater or sea water, that effectively breaks foam and prevents further foaming and air entrapment.

EFA Chemie Defoamer 1833 is a silicone emulsion. It is a highly effective product that can be used successfully in aqueous media in many processes. These are waste water systems, gas scrubbers containing amines, pesticide solutions, etc. The product can be used over a wide pH range.

Bastech 1900 Series is a fatty alcohol water based defoamer designed for use in controlling foam in waste water treatment plants. This product has been designed to eliminate surface foam without depleting dissolved oxygen levels. Bastech 1900 Series has excellent spreading properties and is extremely cost effective.

EFA Chemie Defoamer 1827 has been specially developed for foam control in biological wastewater treatment plants, especially in anaerobic treatment stages. Another area of ​​application is metalworking, where the 1827 defoamer can either be added directly to the cooling lubricant as an additive or used for additional dosing during the actual metal treatment. Defoamer 1827 has also proved its worth in paint applications to combat foam in spray booths. The 1827 defoamer is a proprietary, non-ionic preparation of mineral oils and surfactants.

ACCESS AF 30 IND can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

EFA Chemie Defoamer 1832 is a highly efficient defoamer for a wide range of water treatment processes, particularly in wastewater systems. Its high activity is based on a special gel particle technology: in circuits with sufficiently hard water, the gel particle becomes water-repellent and “explodes” into smaller particles, causing the foam bubbles to burst. DEFOAM 1832 performs best at temperatures below 60°C. DEFOAM 1832 is suitable for process systems in which the usual defoamer components such as oils and waxes are undesirable.

ACCESS AF 105 IND (Water Dispersible) can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

Toynol® Foamic-028 Defoamer is a molecular defoamer used in water-based system.

EFA Chemie Defoamer 1808 is a highly effective defoamer. which is used in many aqueous media. Excellent results have been achieved when used in soft water systems of paper machines and in waste water systems. Defoamer 1808 does not cause contamination in the treated systems. The product contains no mineral or silicone oils, waxes or silicates and breaks down into harmless components during waste water treatment. Defoamer 1808 is a combination of oxygenated hydrocarbons and esters