Products in Power, Water & Utilities: Textiles

USALCO Aluminum Chloride is a solution that is very effective in drinking water treatment, removal of phosphorus from municipal/industrial wastewater, and as an intermediate chemical in the manufacturing of various products. This product complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 250 mg/L.

USALCO Aluminum Sulfate Solution is manufactured by dissolving alumina trihydrate (ATH) in water and sulfuric acid. To ensure the highest quality of this product, stringently selected raw materials and state-of-the-art manufacturing practices are used. USALCO Alum meets the specifications of the American Water Works Association Standard B403‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐ Health Effects at a maximum dosage of 150 mg/L.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

PULPSIL® 822 E is a medium-viscous, highly effective silicone antifoam emulsion developed specifically for use in pulp mills. It is characterized by its very good knock-down efficiency, long-term efficiency, compatibility, and excellent stability. PULPSIL® 822 E acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

All-Plus Chemicals APF552(G) is a versatile copolymer created by grafting hydrophilic and hydrophobic monomers from petroleum sources onto a natural polysaccharide skeleton. This special initiation mode results in yellow granules. It finds application as a water treatment scale inhibition dispersant in textiles, for dispersing calcium carbonate and calcium silicate scales, and as an effective scale inhibition and dispersant in high-hardness-water environments.

Chemical Plant of name L. Karpov Crystalline Sodium Thiosulfate (Technical and Photographic Qualification) in crystal form, essential for various industrial processes including oil and gas processing, copper and zinc flotation, industrial water treatment, skin processing, and cardboard production. Ideal for the paper and pulp industries, it also finds utility in textiles and industrial effluent purification. Packaged conveniently in bags, it ensures easy handling for diverse industrial needs.

Chemical Plant of name L. Karpov Anhydrous Sodium Sulfite (Photographic) derived from sodium salts, this powder serves a range of industrial processes including oil, gas, water treatment, paper, textiles, rubber manufacturing, and more. Ideal for applications such as oil and gas processing, industrial water treatment, paper and pulp production, and synthetic rubber manufacturing. It also finds utility in copper and zinc flotation, cardboard production, skin processing, and industrial effluent purification. Packaged conveniently in bags or super sacks, it serves as a vital API intermediate for pharmaceuticals and nutraceuticals. It is versatile and essential for various industrial needs.

Acriflow UL2 is the sodium salt of polyacrylic acid of low molecular weight. It is used as a dispersant and suspending agent in a wide variety of industrial processes and applications.

Acriflow 041-SA is the ammonium salt of polyacrylic acid of medium molecular weight. It is used as a dispersant, anti-scalent and suspending agent in a wide variety of industrial processes and applications.

Old Bridge Chemicals Zinc Chloride Solution 62.5% Technical Grade is a high purity, multi-application chemical. Zinc chloride has a variety of uses including water treatment as an electrolyte, in battery manufacture, in zinc plating, rubber and fiber vulcanization, textile finishing and for applications in food canning. It has a number of uses in personal care products and as an intermediate for fertilizers, antibiotics and catalysts.

Acriflow 041-S Acid is a polyacrylic acid of medium molecular weight. It are used as a dispersant, anti-scalent or suspending agent in industrial processes and applications.

Acriflow 641-S is the sodium salt of polyacrylic acid of high molecular weight. It is used as a dispersant and flow modifier in niche industrial processes.

DYTEK® DCH-99 (1,2-diamainecyclohexane) is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

Acriflow 141-SA is the ammonium salt of polyacrylic acid of medium molecular weight. It is used as a dispersant, anti-scalent and suspending agent in a wide variety of industrial processes and applications when the presence of an involatile counter ion may cause processing issues.

Acriflow UL-230 is the sodium salt of polyacrylic acid of low molecular weight. A lower solids content version of Acriflow UL-2, it is used as a dispersant and suspending agent in industrial processes and applications.

Amphi® CL is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is both TSCA-approved and REACH-registered, making it ideal for industrial use as a dispersant, emulsifier, and wetting agent. Among its exceptional attributes are its low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. Moreover, it is USDA-certified, readily biodegradable, and free from both prop 65 issues and 1,4-dioxane. Lastly, it is non-GMO, palm oil-free, and boasts a low carbon footprint.

Amphi® M is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-approved and REACH-registered, making it perfect for industrial use as a dispersant, emulsifier, and wetting agent. Amphi® M a number of exceptional attributes, including low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. It is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Additionally, it is non-GMO and palm oil-free, with a low carbon footprint.

Acriflow 141-S Acid is a polyacrylic acid of medium molecular weight. It is used as a dispersant, anti-scalent and suspending agent in industrial processes and applications when low pH is required.