Products in Paper & Pulp: High Purity

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

Mistron® Vapor RE Compacted is a high purity talc offering ideal rheology and performance. It is a functional additive ideal for adhesives, caulks, mastics, and sealants. It provides reinforcement for improved mechanical properties and imparts hydrophobicity and barrier properties for improved corrosion resistance.

Magris Talc HON-200R is a platy talc product that has undergone multi-stage separation treatment, including flotation, to remove carbonates and ensure a high degree of consistency. The particle size distribution, calcium, and iron levels are optimized for use in the manufacture of particulate filters for vehicle emission control systems. The HON-200R regular grade provides a lower-cost solution for vehicle emission control manufacturers with low levels of CaO and Fe2O3 impurities that enhance substrate performance.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 625C is a very fine, high-purity, extremely platy, off-white talc with excellent top-size control that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics. JetFil® 625C is also ideal for the nucleation of semi-crystalline plastics, for plastic films, for foamed plastics, and for flame retardant applications.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

JetFil® M400 is a high-purity, platy, medium-size talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polyethylene, polypropylene, PVC, and other plastic-based applications to achieve maximum stiffness at loading levels of up to 40% or higher. JetFil® M400 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

JetFil® M300 is a high purity, platy, coarse talc that can be used to improve stiffness, HDT, and dimensional stability in polymer applications. It is used in polyethylene, polypropylene, and PVC-based applications to improve mechanical properties at loading levels up to 40% or higher. JetFil® M300 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting. JetFil® M300 may also be used in rigid packaging, appliances, UTH (under the hood), and wood plastic composites (WPC), where it can provide reduced water diffusion, weight gain and swell in water, loss of elasticity and rupture modulus in moist environments, and improved warpage and creep.

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

JetFil® M200 is a high-purity, platy, coarse talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It is used in polyethylene, polypropylene, and PVC-based applications with loading levels up to 40% or higher. JetFil® M200 may also be used in general-purpose applications and wood plastic composites (WPC), where it can provide reduced water diffusion, weight gain and swell in water, loss of elasticity and rupture modulus in moist environments, and improved warpage and creep.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Mistron® Monomix is a high-purity, high-brightness, 6-Hegman micronized microcrystalline talc product. Mistron® Monomix is part of the micronized series of Magris Talc products that have a high surface area and tight top-size control for improved paint performance properties. This product has very good coating stability and anti-settling properties.

Mistron® 002 is a high-purity microcrystalline talc. Mistron® 002 improves exterior durability and barrier properties in architectural primers, topcoats, traffic paints, texture paints, and composite compounds. Mistron® 002 is also suitable for use in adhesives, sealants, caulks, joint compounds, auto body patches, and putties.

Magris Talc FDC is a high-purity, platy talc with 98% talc content. This product is used as a general-purpose coarse filler where high purity and low surface area are required.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

Magris Talc HON-350 is a high-purity, platy talc. Magris Talc HON-350 has been mineralogically floated to remove carbonates, ensuring a high degree of consistency. The particle size distribution and calcium level are optimized for use in the manufacture of ceramic diesel particulate filters for vehicle emission control systems.

Nicron® 665 is an off-white, high-purity, platy, ultrafine talc. It is a highly effective gloss control additive in paints and coatings. Nicron® 665 could be used in performance plastics and plastic films for excellent nucleation and very good stiffness, HDT, dimensional stability, and esthetics.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Magris Talc HON-150 is a high-purity, platy talc. Magris Talc HON-150 has been mineralogically floated to remove carbonates, ensuring a high degree of consistency. The particle size distribution and calcium level are optimized for use in the manufacture of ceramic diesel particulate filters for vehicle emission control systems.

JetFil® M500 is a high-purity, platy, fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It is used in polyethylene, polypropylene, PVC, and other plastic-based applications to achieve maximum stiffness at loading levels of up to 40% or higher. JetFil® M500 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Mistron® 400C is a white, high-purity platy talc with more than 98% talc content. Its brightness, top size, and median particle size have been controlled to produce superior antiblocking and mechanical properties in plastic films, along with lower haze and better clarity.

Nicron® 674DT is a highly densified version of Nicron® 674, which is an off-white, high-purity, platy, ultrafine talc. It has excellent top-size control and is recommended for improved stiffness, HDT, dimensional stability, and esthetics in high-performance plastics and plastic films.

JetFil® M550 is a high-purity, platy, ultra-fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It can be used in polyethylene, polypropylene, and PVC-based applications to achieve maximum stiffness at loading levels up to 40% or higher. JetFil® M550 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

Magris Talc HON-600 is a high-purity, platy talc. Magris Talc HON-600 has been mineralogically floated to remove carbonates, ensuring a high degree of consistency. The particle size distribution and calcium level are optimized for use in the manufacture of ceramic diesel particulate filters for vehicle emission control systems. HON-600 has been processed into a fine, densified powder.