Products in Other Industrial Applications

Solid Vulkollan® 18/40 fills the gap in the hardness range between rubber-elastic materials and hard plastics (e.g. polyamide) and can be adjusted between 65 Shore hardness A and 70 Shore hardness D. Due to its excellent property profile, Vulkollan® is used in all areas of industry where the highest demands are placed on the material. Articles of different geometries from a few grams to more than 100kg unit weight can be produced economically both in large series and in individual production.

Gichem DG08 Polypropylene is PP 40% talc, high dimensional stability and stiffness, High Injection Speed.

PC-ABS Gecomblend 3000 FR is a flame-retardant PC / ABS type, fire protection class V-0 (1.5mm).

Cetox 35OE is a peroxide initiator for the copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

TECACOMP PA66 TC gray 4057 is a Polyamide 66 (PA 66) polymer.

Gichem DG04 Polypropylene is PP 20% talc, good stiffness, High Injection Speed.

RapidPurge RE3000 is a Concentrate grade, must be mixed with a carrier resin prior to use. It is very cost-effective.

Changshu Yitong Polyurethane Product YT-3018 is regid blend polyether polyols which are used in refrigerators, refrigerated cabinets(contain no CP).

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

HyPUR-cel® I2560 is a flexible polyurethane foam, characterized by exceptional high temperature compression set performance while maintaining excellent tensile, tear and elongation properties. These materials were developed for use in a diverse set of applications that include transportation, construction, footwear and industrial markets.

Seiko PMC VS-1063 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Aluminium flake powder

PLASTICYL™ PA1501 is a conductive masterbatch based on polyamide 66 loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ PA1501 is ideal for injection molding and extrusion processes.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

Aluminium flake powder

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

Puyang Shenghuade Chemical 4,4'-Oxydianiline (ODA) is the main material of High temperature resistan t resin, engineering plastic as bellows: Polyimide, polyether imide, polyester imide, a polymaleimide, poly aryl amide. It is material of 3,3',4,4'-Tetraaminodiphenyl Ether which is main monomer of a series of aromatic heterocyclic heat resistant polymeric material. It is material of high performance heat resistance of epoxy resin, polyurethane and other polymer materials and crosslinking agent. It is used to replace Benzidine. Till now, it has been developed different color dyes, such as red, sand red, yellow brown, green, gray, blue, bright orange, black. The dyes can be worked on silk, wool, cotton, hemp and other fabric, and its performance is good than Benzidine.

Grade РС-015 is intended for manufacturing of industrial-used products by injection molding such as thermos-washers, and articles in contact with food and drinking water.

UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

TABOREN® PC 73 T 20-074 is a PP copolymer, Filler: Mineral filler, Stabilization: Antioxidant + UV.

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

G&E 1606 BMB is mechanically mixed SBR Black masterbatch. This material can be used to replace SBR-1606 coprecipitated masterbatch in most applications. G&E 1606 contains 100 parts of SBR, 52 parts of N-300 series carbon black, and 10 Parts of Highly Aromatic Oil.

PolyFibra® PF-PEF04 are partly composed of plant fibers and are therefore partly bio-based. Products made from these materials help reduce fossil fuel consumption by up to 50%.

PC-ABS Gebablend T88 GF30 is 30% glass fiber reinforced PC / ABS type.

Shandong Donglin New Materials CPE (Chlorinated Polyethylene) 135A is a high molecular polymer with linear structure generated by the reaction of HDPE and chlorine. It itself is a special thermoplastic elastomer. It has the following excellent chemical properties: good weather resistance, flame retardancy, It is resistant to chemicals and ozone. Its basic function is to improve the impact strength and weather resistance of PVC products. Donglin CPE 135A has excellent elongation at break and the best tensile strength. Compared with other CPE products, our CPE has higher impact strength.

Cetox 30OE is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

Alkatane HD0390 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

Cell-Flex® Moldable Memory Foam is our thermo-moldable memory foam that provides many design choices that were not previously available for product designers. Whether the primary goal is a unique look or a more comfortable fit, our foam material delivers. We can also combine our moldable memory foam with alternative materials like our Cell-Flex EVA to provide a dual-density/hardness product.

Carbon Black N330 provides good abrasion resistance with high resilience, easy processing, good tensile and tear properties.

Suqian Unitechem Antioxidant 3114 is a hindered phenolic antioxidant with high melting point,low volatility,low mobility,good resistance to water exraction,no pollution,no coloring,etc.Suitable for PE,PP,PS,PET,Nylon,ABS resin,polyurethane,synthetic rubber,etc.

Eurothane 175 ACCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

Sylvin™ 84100-80 Clear is a PVC / TPU alloy formulated for extrusion applications.

European Plastic Joint Stock Company Green Masterbatch is a concentrated mixture of high quality green pigment, polymer carrier and other additives widely applied in plastic industry for coloring polymer, cost savings, and good dispersion.

Camex Limited Titanium Dioxide (Rutile) is Applicable to plastics such as masterbatches, color for PVC flooring, PVC pipe, moldings; used in the paint and textile industries.

Easily flowing, flame-retardant PC-ABS Gecomblend 5000 FR V0 fire protection class V0 (1.5mm).

Gichem DG06 Polypropylene is PP 30% talc, good mechanical characteristics, High Injection Speed.