Products in Oil, Gas & Mining: Fluid Loss Control Additive

CM3500 is a versatile product designed to be an alternative to KCl brines and other temporary clay control additives used to address clay hydration in fresh waters.

LCP 2000® is a high-performance, lost circulation additive is a proprietary blend of organic flakes, fibers and inorganic granules. It can be used to treat seepage, partial, severe and total losses for induced and natural fractures.

GILSON 365™ is a natural gilsonite with ash content less than 1.1%. It is used for filtrate loss control and gives excellent shale control and stability while drilling. Because GILSON 365™ has a large molecular weight distribution and a high molecular weight, the softening point is high compared to other types of polymers, which allows it to soften or deform as it nears its softening point instead of completely melting into a low-viscosity liquid. Even when GILSON 365TM is 20 degrees above its softening point, it is still a high-viscosity liquid.

PEG-503™ is a proprietary, multi-blend product designed to plug loss circulation zones with fine to medium fractures. PEG-503™ is easily mixed with conventional rig equipment. PEG-503™ is designed to be used in water or oil based drilling fluids. PEG-503™ produces a very thick, tough cake which resists washing away once drilling resumes. Normal quantities required are 7ppb, when severe losses are found add 15 - 20 ppb.

Boremaster® is a low-cost drilling fluid conditioning agent that dramatically reduces torque and drag-HT/HP filtration-whole mud loss and works efficiently and safely in oil, synthetic, or water base mud. It has no sheen and no toxic.

Gilsonite® Aqua Sol 325 is a cost-effective, high-performance additive effective in a wide range of water-based systems for both low and high temperature wells. Gilsonite® uintaite is renowned as an excellent shale stabilizer.

APChem CFL 110 is a powdered polysaccharide derivative suitable for application in fresh water or with salt up to 18% by weight of water (BWOW). Effective to 220°F (104°C). Acts as a retarder at temperatures below 71°C.

APChem BXL 8.5 is an aqueous borate cross-linker that contains internal buffers to automatically raise the pH of the gelled fluid to the range of 8.5 to 8.7 and enable the use of enzyme breakers. Provides an immediate cross-link for low temperature applications below 60°C.

APChem CFL 205 is a synthetic, water-soluble, latex powder effective from 60 to 232°C to make cement more elastic (less shattering on perforating). Can be used with fresh water, seawater, calcium chloride water (up to 8%), and saturated saltwater.

Gilsonite® LM-P is the most cost-effective multifunctional additive for any type of mud.With its unique chemical properties and physical characteristics, Gilsonite® uintaite is scientifically proven to improve wellbore stability, plug micro-fractures, and bond and seal all types of formations.Multifunctional Gilsonite® lowers costs by allowing you to use fewer additives.

Gilsonite® XM-P is the most cost-effective multifunctional additive for any type of mud.With its unique chemical properties and physical characteristics, Gilsonite® uintaite is scientifically proven to improve wellbore stability, plug micro-fractures, and bond and seal all types of formations.Multifunctional Gilsonite® lowers costs by allowing you to use fewer additives.

PecoFlake 303™ is a unique proprietary flaked calcium carbonate effective in controlling seepage and circulation losses in completion and drilling fluids. It is available in fine, medium and coarse grades.

Pecomul 350™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for synthetic based drilling fluids systems. Pecomul 350™ is designed using low aromatic base oils.

Gilsonite® GM-P is the most cost-effective multifunctional additive for any type of mud.With its unique chemical properties and physical characteristics, Gilsonite® uintaite is scientifically proven to improve wellbore stability, plug micro-fractures, and bond and seal all types of formations.Multifunctional Gilsonite® lowers costs by allowing you to use fewer additives.

PETROBLEND Middle East CT RLIG is a broad application Fluid Loss Control agent that can be used in virtually all water based mud Systems in the presence of contaminants.

CM3550 is a versatile product compatible with all common drilling additives and a wide range of pH. It is efficient and can achieve the desired performance at very low per barrel treatment rates.

Western Clay PRIME-GEL is a 200 mesh, superior-grade, treated, sodium bentonite which meets or exceeds the current edition of API Specification 13A, section 9 bentonite requirements. PRIME-GEL functions as a viscosifier, suspending agent and filtrate reducer in freshwater drilling systems.

APChem BXL 10 is an aqueous borate cross-linker that contains internal buffers to automatically raise the pH of the gelled fluid to the range of 9.0 to 11.0 (optimally 10.0). Provides an immediate cross-link and is stable to 121°C.

PecoSeal 306™ is a unique formula of carbon base material that has a selective particle distribution in order to reach the most optimal distribution. This material is used as bridging agent or plugging in porous formations. PecoSeal 306™ is thermally stable and non-expansible; it has a neutral pH and will not affect adversely the properties of the mud.

APChem BXL-STD is a delayed borate systems which help to minimize friction pressures by delaying the cross-link time of the base gel. BXL-STD provides a 2 to 3 minute delay for HPG gels.